1,308 sierras usadas para la venta

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4200 €: 315 mm: 315x32x63 mm: 45 / 90 U/Min: 45 °: 45 °: rund 105 mm / quadratisch : rund 90 mm / quadratisch : rund 90 mm / quadratisch : 1,3 / 1,8 kW: 600 mm: 1000 mm: 1400 mm: 200 kgManual viceRobust double joint pivotLow-voltage start/stop switch in the handle45-degree left and 45-degree right mitre cutsSplit vice (clamps before and after the sawblade)Sawblade not includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mmband length: 450 mmcapacity 90 degrees: square: 240 x 240 mmcapacity 90 degrees: flat: 280 x 160 mmcapacity 45 degrees: round: 180 mmdimensions of saw-blade: 450 x 40 x 2.0 mmengine output: 2.6 kWheight of material-table: 500 mmweight of the machine ca.: 495 kgrange L-W-H: 1500 x 600 x 1340 mmFurnishing:- stepless hydraulic lowering- manual vice- Miter adjustment ü. vice- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de corte: / mmlongitud de la cinta de sierra: / mmancho de corte: / mmControl: / sierra de cinta KASTO HBA 1060/1260AUrango de corte: 1060x1260mmVelocidad de corte: 16-80m/minPeso de la pieza: Máx. 20 toneladasHoja de sierra: 11400x80x1.6mmIncluye mando a distanciaPeso de la máquina: 19 toneladasLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 8680 €: 167.52 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 370x140 mm: rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm: 1550 mm: 1400 mm: 1900 mm: 353 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: / mmsaw band length: / mmcutting width: / mmKASTO tec AC5 automatic band sawSawing capacity: 23kWMachine weight: 5.9tYear of manufacture: 2002Cutting ranges in mm approx.:Round: 530mmSquare: 530x530mmFlat: 530x630mmSmallest dimension to be sawn: 10x10 mmMinimum length to be sawn: 6 mmMinimum residual length, single cut: 10 mmMinimum residual length, automatic mode: 35 mmAutomatic material feed, single, max. (standard): 600 mmAutomatic material feed single max. (optional): 1500/3000 mmMultiple material feed: 9999 mmMachine roller conveyor length: 1568 mmMax. piece weight: 2275 kgCutting speed: 12-120 m/min (infinitely variable)Cutting feed: continuously adjustableMaterial feed: with ball screwAutomatic feed: with horizontal clamping deviceMaterial clamping: hydraulic, continuously adjustableClamping forceMachine clamping device: 200-1000 daNFeed clamping device: 200-2000 ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 €: 863.51 €: Schwenkrahmen : 3120x27x0,9 mm: 20-100 m/min: 280 mm: 240 mm: 310x240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 2800 mm: 2000 mm: 1820 mm: 1200 kgCNC control with 7", touchscreen for following functions:feeding length, pieces and rotation of the bow for mitre cuttingautomatic feed 1000 mm / strokevariable cutting pressuremachine with speed variatorcoolante equipmentmotorizes chip brushchip conveyerautomatic saw blade breakage detectionhydraulic clamping vicesRecommended max. diameter of solid material in automatic mode: 150 mmuser manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 8300 €: 160.19 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1500 mm: 1400 mm: 1850 mm: 345 kgmanual vice with lever for quick clampinggravity downfeed with adjustable damper2 speedscoolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de corte: / mmlongitud de banda: / mmpeso de la máquina aprox.: 0,8 tdimensiones de la máquina aprox.: mNecesidad total de potencia: kT Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro del rollo: 420 mmgarganta: 400 mmaltura de la pieza de trabajo: 280 mmlongitud de la sierra: 3200 - 3400 mmsuperficie de la mesa: 600 x 500 mmpotencia total: 1,7 kWpeso de la máquina aprox.: 0,5 tdimensiones de la máquina aprox.: 1 x 0,7 x 1,9 mde Repair ShopLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmstroke: - mmsaw blade diameter: möglich: 400 + 370 mmSaw blade: 50 mmsaw blade feed stepless ca.: 0 - 1000 mm/minrapid return speed: 3300 mm/mintable rotating: + / - 90 Gradcutting speed: 7 - 43 m/mintotal power requirement: 4 kWweight of the machine ca.: 1050 kgOverall size: 1020 x 1350 x 2000 mmrequired space: mElectric 380 Volt: Approach rolling table: ca. 4 mRoller conveyor measuring stop digital: ca. 6 mSemi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmstroke: mmtotal power requirement: 4 kWweight of the machine ca.: 1,05 trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 17770 €: 341.18 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 2800 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/strokevariable cutting pressure.Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicesmaterial chutechip brushsugge ...

saw blade diameter: 425 mmcutting diameter: 130 / 140 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 260 x 80 mmcutting speed: 11 / 22 m/mincapacity 45 degrees: flat: 180 x 80 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmwork height max.: 1050 mmDrive: 1,6 / 2,5 kWweight of the machine ca.: 1160 kgdimensions of the machine ca.: 1,25 x 1,2 x 1,9 mCondition: ready for operation: Video available on our website.: Condition: good: Electric 380 Volt: Cooling equipment: Chip protect bonnet: saw blade: 400 mmSemi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice.Semi-automatic operation means:1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material.Infeed roller conveyor 2000 mm and discharge roller ...

diámetro de la hoja de sierra: 350 mmdimensiones de la hoja de sierra: 350 x 30 x 50 mmpeso de la máquina aprox.: 100 kgLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de la hoja de sierra: mmdiámetro de corte: mmcarrera: mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de la hoja de sierra: mmdiámetro de corte: mmcarrera: mmpotencia total: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de la hoja de sierra: 275 mmVelocidad del husillo: 4000 U/min.potencia total requerida: 1,7 kLosos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 46700 €: 891.97 €: Doppelsäulenführung : 8200x41x1,3 mm: 20-100 m/min: 810 mm: 750 mm: 910x750 mm: rund 600 mm, quadrat 600 : rund 360 mm, quadrat 360 : 725 mm: 4 kW: 0.12 kW: 4020 mm: 1600 mm: 2450 mm: 3970 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmenthydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHOPTIONS: Hydraulic vertical clamping Micro cooling unit Laser linerThe data for  ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 14110 €: 270.91 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 420x200 mm: rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm: 1600 mm: 1600 mm: 1800 mm: 488 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de la hoja de sierra: 560/660/710 mmDiámetro de corte: 170/220 mmRango de corte: 1000 x 220 mmVelocidad de corte: 7- 48 m/minDispositivos de sujeción hidráulicos neumáticos: 20- 315 mmDimensiones: 2,9 x 2,2x 1,95 mPotencia total requerida: kWpeso de la máquina aprox.: 2,8 tSierra de placas usada- accesorios de piezas- nuevos componentes de seguridad- panel de control externo Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

: neu : 2025 : 060103 : prompt, Zwischenverkauf v : Türkei : 7500 €: 121.59 €: 1 : 6300 €: 350 mm: 350x32x63 mm: 45 / 80 U/Min: 45 °: 45 °: rund 115 mm / quadratisch : rund 110 mm / quadratisch : rund 110 mm / quadratisch : 1,8 / 2,2 kW: 1100 mm: 1000 mm: 1400 mm: 300 kgSemi-automatic circular saw designedHigh production rates, ideal for small and mid productionHeavy duty gearboxCast iron structureFoot switch actuationHydro-pneumatic operation of saw head smoothes descent for optimum cutPneumatic vice2 cutting speedsAdjustable head stroke according to the dimensions of the material which has to be cutPiece counter45° right to 45° left cuttingsaw blade not includedOPTION:saw blade Dm. 350 mm € 180,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mmsaw band length: 5400 x 34 x 1.1 mmcapacity 90 degrees: flat: 500 x 300 mmcapacity 45 degrees: round: 300 mmcapacity 45 degrees: flat: 300 x 300 mmcapacity 60 degrees: round: 130 mmcapacity 60 degrees: flat: 130 x 250 mmclamping range: 0 - 500 mmclamping height: 20 - 320 mm: 300 Single stroke - automatic: 0 - 600 mmMultiple stroke - automatic: 0 - 9999 mmRemaining piece length: ca. 75.0 / 155 mmmin. dia.: Ø 5.0 mmwork height max.: 750 / 830 mmdown speed: 0 - 300 mm/secworkpiece weight: max. 250 kg/mcoolant capacity: 120 lcutting pressure: 10 - 30 barControl: SIEMENS total power requirement: 5.5 kW ACweight: ca. 3000 kgrange L-W-H: 2800 x 2600 x 2200 mm in good conditions with lots of special accessories ()Features:- Robust, fully automatic electro-hydraulic miter band saw (INDUSTRIAL)- For angles up to 60°, with ball-bearing rotary table- Electric motor angle ad ...

cutting diameter: 290 mmcapacity 90 degrees: flat: 320 x 290 mmcapacity 45 degrees: flat: 240 x 150 mmcapacity 45 degrees: round: 240 mmcapacity 60 degrees: flat: 150 x 180 mmcapacity 60 degrees: round: 150 mmturning speed range:: 35 + 70 m/minsaw band length: 3100 x 27 x 0.9 mmweight of the machine ca.: 540 kgrange L-W-H: 1800 x 950 x 2100 mmFeatures:- Robust electro-hydraulic band saw (INDUSTRY)- Large mounted rotary table For miter cuts from 45° left to 60° right- Automatic saw frame lowering With continuously adjustable feed End stop at end of cut- 2x saw blade speeds- Manual vice clamping- Control panel - front right- Coolant device- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro del rollo: 500 mmgarganta: B485/H350 mmtamaño de la mesa: 700x600 mmvelocidad de corte: 15-940 m/minpeso de la máquina aprox.: 0,9 tdimensiones de la máquina aprox.: 1200x800x2100 mmLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

cutting diameter: 320 mmsaw band length: 3660 mmdimensions of saw-band: 3660 x 27 x 0.9 mmcapacity 90 degrees: round: 320 mmcapacity 90 degrees: flat: 350 x 250 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 250 x 180 mmheight of material-table: ca. 750 mmengine output: 2.0 kWweight: 750 kgrange L-W-H: 1950 x 1100 x 1450 mm Machine in good condition ()The compact design, exceptionally large working area, and easy handling make this model a versatile workshop machine. High-precision saw blade guides, vibration-damping cast components, and thusabsolutely smooth operation arealso part of the quality standard of this machine.Features:- Robust electro-hydraulic band saw- Miter cuts up to 60 degrees (one-sided) possible- Hydraulic unit for automatic saw blade raising- Continuously adjustable saw blade lowering- Continuously adjustable saw blade speed- Robust/stable manual vise- ...

roll diameter: 420 mmthroat: 405 mmworkpiece height: 380 mmcutting speed: 16 - 2200 m/mintable surface area: 615 x 615 mmsaw band length: 3450/3650x6-20x0,9 mmwork height max.: 955 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 470 kgdimensions of the machine ca.: 1250 x 1000 x 2100 mm From a training workshop Good condition ()Features:- Robust, vertical band saw machine- Frequency-controlled, infinitely variable belt drive- Belt guide height adjustment with hand wheel- IDEAL belt welding system, with shears and grinding motor- Swivel table 15°/45°- Machine base- Swiveling machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmcutting width: 400 mmcapacity 90 degrees: flat: 400 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmband speed: 17 - 110 m/minengine output: 3,5 kWdimensions of saw-band: 3830 x 25 x 0,9 mmweight of the machine ca.: 1,3 tdimensions of the machine ca.: 2,1 x 2,0 x 1,6 mHigh-performance fully automatic band saw with- coolant system- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 315/350 mmcapacity 90 degrees: round: 125 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 160x90 mmcapacity 45 degrees: round: 105 mmcapacity 45 degrees: square: 90 mmcapacity 60 degrees: flat: 80x100 mmtotal power requirement: 1,8/2,5 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 0,6 x 1,22 x 1,06 mUnused display machine!Includes saw blade and base cabinet• For right and left miter cuts up to 45°, end stop at 90° and at 45° left• Vice with quick-release lever, longitudinally adjustable clamping jaw,adjustable guide, and double clamping arm for burr-free cuts• 2 speeds: 30 + 60 rpm• Automatic cooling directly on the saw blade• Length stop, assembly toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.