trabajo con chapas de metal usadas para la venta (3,313)

sheet width: 2600 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 220 mmside roll diameter: ~ 170 mmdiameter of lower rolls: ~ 190 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: ca. 5000 kgDimensions (only the machine): ca. 3500 x 1550 x 1400 mm very good condition () current new price incl. accessories approx. 120.000 Euro special price on requestEquipment:- robust electro-hydraulic 4-roll round bending machine- 4-roll concept offers a wide range of bending and rounding options- Swivel-mounted control unit Operation - control of all rollers or machine axes Digital position display of the side rollers Manual operation via JOY sticks- Two central rollers are driven directly via hydraulic motors- Conical rolling possible by tilting the rollers- Parallelism of the side rollers via torsion shafts- Bending on both side ...

sheet width - max.: 1020 mmplate thickness: 1,5 mmcutting length: 1020 mmweight: ca. 300 kgdimensions of the machine ca.: 1,3 x 0,8 mCondition: good, demo machine: Side stop: 600 mmMaterial place of deposit: ausziehbar Hand lever shears with counterweight, length stop, blank holder withQuick clamping, mm scale on the table, pull-out sheet metal support.Demonstration machine at a special price.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 6 - 28 mmwall strength: 2 mmbending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mmbending angle max.: 190 °arbor length: 3000 mmoperating pressure: 180 barhydraulic motor: 4 kWweight of the machine ca.: 900 kgdimensions of the machine ca.: 3,8 x 1,1 x 1,3 mCondition: ready for operation: Video available on our website.: Electric 400 Volt: Bending segments: 15-20-26-28 mmBending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 mDouble Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut.Mandrel lubrication, adjustable length stops.Operating modes: MANUAL and semi-automatic.Co ...

engraving field: 120 x 120 mmtable-size: 250 x 250 mmworkpiece weight: max 50 kgControl: Fobagraf machine weight ab.: 1000 kgmachine frame made of welded steel constructionCross slide, hard stone design, table top with steel stop ironHeight-adjustable laser headQuality-switched ND: YAG laser head, lamp-pumped, 100 WDeflection unit mounted on the laser head (with standard lens)Z-axis with gearbox and servo driveServo axis control with X-, Y-, and Z-axesWater-cooledControl: Fobagraf user software packageOperating system: Windows 2000operating hours: 17.388 hmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1300 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 2 mmthickness at Niro-steel: 1,25 mmno. of strokes: 63 Hub/mincutting angle: 1,13 °table height: 750 mmtable width: 320 mmback stop - adjustable: 5,0-550 mmtotal power requirement: 3 kWweight of the machine ca.: 1600 kgEquipment:- manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range- 1x long side stop- 3x support arms- Free-moving foot switch- Sheet holding device for thin sheet blanksThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mmplate thickness: 5 mmdistance between columns: 3020 mmControl: Simatec OP7 stroke: 450 mmback stop - adjustable: 1000 mmwork height max.: 900 mmtotal power requirement: 22 kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: 4200 x 1600/2900 x 2000 mmFeatures:- Motorized backstop, 1000 mm- Motorized upper crossbar adjustment- Motorized lower crossbar adjustment- Side protection- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la lámina: 3000 mm, grosor de la placa: 4 mm, altura máxima: 900 mm: 450 mm, consumo total de potencia: 5,5 kWpeso: aprox. 4800 kg. Dimensiones de la máquina: 4250 x 1500 x 1850 mm. Equipamiento: - ajuste eléctrico del ángulo de flexión- ajuste eléctrico de la viga superior- interruptor de pie- instrucciones de uso. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 3240 mmGrosor de la placa: 2,00 mmDistancia entre columnas: mmRequisitos totales de potencia: kWweight de la máquina: aprox. 3,00 tDimensiones de la máquina aprox.: mOperación de flexión manual y automática posibleÁngulo de flexión ajustable mediante potenciómetroAltura de la carrera superior y grosor del material seleccionables mediante interruptores DIP. Doblado el carril y la máquina en excelente estado. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 10-1000 mmcutting angle: 0,5 - 2,5 °down holder: 20 Stkno. of strokes: 14 - 23 Hub/minwork height max.: 900 mmoil volume: 140 ltotal power requirement: 11 kWdimensions of the machine ca.: 4000 x 2150 x 1900 mmweight: 7800 kgEquipment:- ELGO control unit type P50- Automatic cutting angle adjustment- Automatic cutting gap adjustment- electric back gauge- Pneumatic sheet holding device- Light barrier behind the machine- 4 support arms- front finger guard- foot switch- Angle stop 0 - 180- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 34 mmsquare edge steel: 30 x 30 mmL-beam: 100 x 10 mmflat steel: 100 x 14...160 x 11 mmblade length: 175 mmT-beam: 100 x 10 mmnotching: l + T material: 10 mmhole punhing press: pressure: 45 tthroat: 305 mmtotal power requirement: 3 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 10.0 mm/secreturn speed: 135 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmcontrol: ModEva 12S oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8800 kgrange L-W-H: 4250 x 2150 x 2800 mm current new price approx. 80.000 euros special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ALo1SpWfnTk--------------------------- ------------------------------SPEED BEND electro-hydraulic press brake with : increased installation height increased cylinder stroke increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- CYBELEC ModEva 12S CNC control unit High-resolution screen Clear, concise menus in the ...

plate thickness: 6.5 mmthickness at Niro-steel: 5.0 mmangle adjustable from - to: 30 - 140 Gradno. of strokes: ca. 50 Hub/mintable:: 950 x 1030 mmblade length: 220 x 220 mmtotal power requirement: 4.0 kWweight: 800 kgrange L-W-H: 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition () special price on requestEquipment:- electro-hydraulic notching machine- multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools- manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment- large / stable work table- 2x new angle stop, adjustable- automatic cutting gap adjustment- 1x freely movable foot switch- connection cable + 16A plug- cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VAThe data for this ad was created with ModulMWS - the software solution of LogoTe ...

Ancho de la lámina: 2040 mm Grosor de la placa: 3,00 mm Distancia entre columnas: mm Requisito total de potencia: kWweight de la máquina aprox. 2,30 tDimensiones de la máquina aprox. mOperación de flexión manual y automática posibleÁngulo de flexión ajustable mediante potenciómetroAltura de la carrera superior de la mordaza y grosor del material seleccionables mediante interruptores DIPPogás manual con dedos de resorteLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

round bar steel: 45 mmsquare edge steel: 45 mmL-beam: 12 mm: 40 flat steel: 450x15 mmL-beam 90°: 152x152x13 mm: 45 mmsquare edge steel: 45 mm: 12 mmweight of the machine ca.: 2323 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table width: 6000 mmtable length: 2000 mmburner heads: 1 Equipment:- Plasma source Kjellberg Hi Focus 161i- suction unit- CompressorTechnical dataKjellberg Hi Focus 161i plasma cutter:Cutting current at 100 % ED 10 - 160 AMarking current 5 - 25 ACutting range 0.5 - 50 mmPiercing up to 30 mmDimensions (L x W x H) 985 x 570 x 1140 mmMass 206 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peso máximo: 20 Diámetro de la pieza: 1500 - 3500 mm Diámetro del tambor: 250 x 100 mm Alimentación: 100 - 1400 mm/mínimo Consumo total de potencia: 0,75 kWPeso de la máquina aprox: 2,5 tDimensiones (LxAncho x H): 2,5 x 1,5 x 1,5 m Soporte de rodillos - Auto-alineado - Rotación hacia adelante/atrás - Nuevo sistema de control - Pedal - Dispositivo de parada de emergencia Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la hoja: 3050 mm Grosor de la placa: 4 mm Peso de la máquina aprox: 6,500 kg Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Grosor de la placa: 1,7 mmroll diámetro: 50 mmDimensiones (L/P/H): 1600 x 600 x 1500 mmPeso de la máquina aprox: 400 kgLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: tplate thickness: mmno. of strokes: Hub/mintotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grosor de la placa: 4 mm Ajuste del ángulo de corte: 30-120 altura de la mesa: 900 mm: 407 Peso de la máquina aprox. 760 kg Dimensiones de la máquina aprox: 1300x1000x1150 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de lámina: 3050 mm Grosor de placa: 6 mm Peso: 7,000 kg Rango L-P-H: 3450x2200x1750 mm Equipo/accesorios: - mesa de soporte ajustable - Soporte de lámina - tope angular - Brazos de soporte de lámina - interruptor de pie Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 4200 mm Grosor de la placa: 14 mm Pre-curvatura: 10 mm de diámetro del rodillo superior: 340 mm rodillo de diámetro del rodillo inferior: 310 mm Velocidad: - m/minControl: Davi CNC Requisito total de potencia: - kW de la máquina aprox. 11 tDimensiones de la máquina aprox: 6,5 x 1,75 x 1,65 m - DAVI CNC Control - pre-flexión - Accionamiento hidráulico de 4 rodillos - Diámetro del rodillo lateral: 230 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 100 tchamfer lenght: 3100 mmdistance between columns: 2550 mmcolumn arm: 400 mmtable height: 925 mmstroke: 200 mmcontrol: Cybelec DNC 8805 output: 11 kwtotal connected load: 15 kWweight of the machine ca.: 9,0 trange L-W-H: 5,2 x 2,1 x 2,9 mUsed CNC- press brake- some upper tooling (no lover tooling)- Infrared security device- documentation- hydraulic Crowning- 2 axis backgauge X + RThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3120 mmdown holder: 14 Stückcutting angle: 1°5 no. of strokes: 14 Hub/mincontrol: ENC 100 table width: 500 mmwork height max.: 880 mmoil volume: 170 ltr.total power requirement: 11.0 KWweight: 5550 kgrange L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro----------------------------------------------------Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front----------------------------------------------------Equipment:- electro-hydraulic guillotine shears swing cut- with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Retraction from backgauge on/ ...

x-travel: 4216,0 mmy-travel: 2007,0 mmz-travel: 305,0 mmcontrol: CNC table-size: 4902,0 x 2134,0 mmmax. workpiece weight: 1465 kg / m²machine weight ab.: 2500 kgtotal power requirement: 30 kWdimensions of the machine ca.: 5486,0 x 3708,0 mmThe compact waterjet cutting system in bridge design consists of a torsion-resistanttorsion-resistant steel construction, which is coated with a special durable anti-corrosion coating.coating. Both the two X-axes and the particularly high Y-axis are based on theY-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system.specially developed by OMAX for the special requirements of a waterjet cutting system.Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pi ...

sheet width: 3040 mmplate thickness: 4 mmdistance between columns: 3040 mmstroke of upper beam: 200 mmadjustment of lower and bend clamping: 100 mmtotal power requirement: 6,4/3 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: 4,3 x 1,2 x 1,8 mCondition: ready for operation: Electric 380 Volt: Control panel: Winkelvorwahl Holder for divided upper tools: Upper tool divided: 3040 x 120 mmHnad control: Sheet metal shelf behind: Folding blade: Flat rail for folding beam: Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOPRAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--.As usual, the sheet thick ...

: 2100 mm: 7 mm: 6 mmroll diámetro: 190 mmmin. Diámstro: 285 mm: 4 kW: 3200 kg: 4000x1350x1500 mm Equipamiento: - ajuste motorizado de rodillos traseros - Pantalla digital - Flexión cónica automática. - Interruptor de pie - dispositivos de seguridad Los datos de este anuncio se crearon con ModulMWS - la solución de software de LogoTech oHG.

tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.