13 ERNST maquina usada para la venta

This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.

working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden

working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden

Núm. Inv. : 7803 Tipo: EM 5 N II/L 2F Productor: ERNST Creado: 2006 Parámetros: Longitud mínima de la pieza: 350 mm Espesor máximo de la pieza: 70 mm Anchura de molienda: 1380 mm Peso: 5100 kg

Operator side: left, workpiece thickness: 1-150mm, constant working height: 860mm, feed speed infinitely variable via frequency inverter: 1-4m/min, upper section paint finish: telegrey RAL 7074, lower section paint finish: gentian blue RAL 5010, sanding roller Shore hardness: A20, max. workpiece weight: 300kg, thickness and tolerance compensation: ±1mm, max. workpiece distortion over the entire workpiece length: 6mm, noise level approx.: 85dBA, mains voltage: 3/PEN AC 400V ±10%, alternatively: 3/PEN AC 480V, phase sequence: clockwise rotating L1-L2-L3, protective measure: TN-C system with PEN conductor according to VDE 0100 T310, control voltage: DC 24V, compressed air connection: 6bar ±10%, clean, oil-free, dried air. Equipment: CE marking, electrical operating elements in the control panel, safety flap at the infeed, electromechanical workpiece thickness adjustment, automatic convey ...

Manufacturer: Ernst, Type: 830-2, Monting of the machine: längs / längs / längs, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 1.400 x 3.150, Band 1 Leistung kW : 11, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2 - 10, Belt 2 shoe unit: yes, Band 2 Leistung kW : 11, Band 2 Schleifbandgeschwindigkeit m/s : 2 - 10, Band 3 Leistung kW : 18, Band 3 Schleifbandgeschwindigkeit m/s : 1 - 7, Frequency control of belts: 3, Continous adjustable feeding speed m/min: 8 - 30, Vacuum table: yes, Brushing unit: 3 kW, Diameter/ brush bristles: 200,

Manufacturer: Ernst Funierschleifautomat, Type: 840-2, Year: 2003, Monting of the machine: Quer/lang/lang/lang/Bürste, Sanding width mm: 1305, Sanding hight mm: 3-120, Number of sanding belts: 4, Sanding belt dimensions: 2620 X 1350/5400 X 150, Table hight adjustment by engine: yes, Rollers: no, Band 1Querschleifaggregat: yes, Band 1 Leistung kW : 18,5, Band 2 Schuhaggregat: Simplex Schuh, Band 2 Kombiaggregat Walze/Schuh: no, Band 2 Leistung kW : 30, Band 3 Kombiaggregat Walze/Schuh: Simplex Schuh, Band 3 Leistung kW : 30, Band 4 Kombiaggregat Walze/Schuh: Duplex Schuh, Band 4 Leistung kW : 37, Elektronische Tastung mm: yes, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 13,5-60, Feeding engine kw: ca.4, Constant table hight: 880, Vacuum table: yes, Segment sanding shoe: yes, wast cleaning: yes, Ionising: yes, Weight in kg: 10200, Year :2003

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante: Ernst , Tipo: AB 1 1300, Año: 1982, Control: no, Limpieza con aire comprimido: sí, Número de unidades: 2, Unidades montadas en posición vertical: sí, Transporte de rollos: sí, Velocidad de alimentación ajustable continuamente: gekoppelt an Schleifmaschine, chorros de rotor: Kanal, TEXTO LIBRE: Arbeitsbreite 1400/Arbeitshöhe 80/inkl. Turbina, Año :1982

Fabricante: Ernst, Tipo: 830 J-2, Montaje de la máquina: quer / längs / längs, Anchura de lijado mm: 1380, Altura de lijado mm: 3 - 120, Número de bandas de lijado: 3, Dimensiones de la banda de lijado: 5.400 x 150 + 3.150 x 1.400, Unidades de lijado transversal: 1, Längsschleifaggregate: 2, Banda 1 Leistung kW : 15, Banda 2 Leistung kW : 30, Banda 3 Leistung kW : 37, Velocidad de alimentación ajustable en continuo m/min: 12 - 36, Lijado intermedio de laca: no, Altura constante de la mesa: ca 880, Mesa de vacío: 7,5, Unidad de cepillado: 1,1, Peso en kg: 7.400,

Fabricante: Ernst, Tipo: Vakuumventilator, Año: 1993, Diámetro de admisión mm: ca 120 mm, Potencia del motor kW: 2,5, Caudal aprox. m3/h: 1500, Motor de transmisión por correa trapezoidal: sí, Lado de salida mm: ca.100, Año :1993

Lijadora de banda ancha para madera, chapa y barniz Ernst LBK 1300 Ancho de molienda: 1300 mm Unidad de molienda transversal Unidad de molienda longitudinal