97 WEILER maquina usada para la venta

Velocidad máxima del husillo: 2800 RPM Marca Weiler Fuente de Energía Eléctrica Tipo de control convencional Peso de la máquina (kg) 800 Triple biselado Modelo/Tipo VS1 Año de fabricación 1979

Aproximadamente 3.000 horas de funcionamiento. Información clave: Producción: 3150 envases por hora 250ml; 2700 envases por hora 500ml Moldes y herramientas para bolsas/frascos intravenosos de 250 ml y 500 ml (14 cavidades) incluidos Utillaje para presentaciones Eurocap o de pezón/perforación. Máquina de soldadura de tapas Eurocap con elevador de tapas Tres filtros de producto 14 parches parisón programables con controlador Moog.

- Perforación y torniqueteo en todas las direcciones: puede moverse en 7 ejes: preparación rápida, precisión y rendimiento en piezas pesadas y voluminosas. - Campo utilizando turbinas, generadores, compresores, construcción de acero, calderas: contenedores, equipos químicos, hornos de cemento y construcción naval.

Picadora de carne Weiler usada, modelo 878 AG.

Weiler 1612 Molinillo de bloques congelados Amoladora de alta resistencia

Picadora para carne congelada desmenuzada

turning diameter: 570 mm turning length: 1000 mm control: WEILER D3 swing diameter over slide rest: 325 mm Swing in gap: 600 mm length of gap: 140 mm spindle bore: 83 mm spindle diameter in front bearing: 120 mm face stroke: 340 mm longitudinal stroke: 1100 mm workpiece weight max.: 1200 kg spindle turning speed - stepless: 1 - 2500 U/min transmission ratio: 2 rapid travel - longitudinal/face: 10 / 5 m/min main drive motor: (60/100 % ED) 20 / 17 kW tailstock quill diameter: 80 mm tailstock quill stroke: 200 mm tailstock quill taper MT: 5 weight of the machine ca.: 3,8 t dimensions of the machine ca.: 2,95 x 1,90 x 1,82 m Switch-on hours (date 18. May 2026): 28.970 h Control WEILER D3 Chip conveyor Toolholder Multifix with several inserts 3-jaw chuck SCHUNK ROTA-S plus 315-92 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60- ...

turning length: 450 mm turning diameter over bed: 245 mm turning diameter over slide rest: 135 mm spindle bore: 23.0 mm tool adaptor: DIN 55021-4 quill:: 2 MK quill travel: 80.0 mm turning speeds: 60 - 3000 U/min bed width: 155 mm total power requirement: 1.2 / 1.5 kW voltage: 380 V weight of the machine ca.: 340 kg. range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout D60 ...

centre height: 400 mm centre distance: 3.000 mm max. swing over bed: 810 mm max. swing over facing slide: 510 mm max. swing-dia. in gap: 850 mm control: WEILER max. workpiece weight: 3.800 kg spindle diameter in front bearing: 150 mm spindle bore: 106 mm faceplate diameter: 630 mm worktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mm spindle turning speed - stepless: 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - -  ...

Horas en la imagen El Weiler E50 de 2003 es un torno de pulgadas controladas por ciclo, que se sitúa en el punto óptimo entre una máquina manual y una CNC completa. En 2003, esta máquina fue la reina del mundo de la producción de pulgadas de pulgada y pequeños lotes. Encuentra más aquí - / Contacta con nosotros en -

Encuentra más aquí - / Contacta con nosotros en -

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 165 mm turning length: 800 mm total power requirement: 3 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2 x 1 x 1,5 m No. 1009 Lathe WEILER LZ-300 Speed range 24-2800 1/min. Feed rates 0.013-1.27 mm/min Space requirement approx. 19 0x 700 mm, Weight approx. 700 kg. The e-lead spindle is removed from the machine 3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessories tool cabinet with various accessories. Working area: 165 x 600 Drive: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado sobre la cama: 330 mm Diámetro de giro sobre reposacabezas: 200 mm Longitud de torneado: 800 mm Consumo total de potencia: 3 kWweight de la máquina aprox. 800 kg Dimensiones de la máquina aprox: 1,9x0,7x1,2 Rango de velocidad de giro: 24-2800 U/min Accesorios 2 mandrillos rotatorios con mordazas de repuesto 5 soportes Multifix Conjunto de ruedas intercambiablesDiversas puntas y accesoriosLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado: - mm Longitud de torneado: - MmSwing diameter sobre la corredera de la cama: - mmRequisito total de potencia: - kWweight de la máquina aprox: - tDimensiones de la máquina ca.: - mWEILER Bundle- RDU - LZ 330- 2 x Commodor- UD 24- DZ 67 V3. Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: - mmLongitud de giro: - mmcontrol: BOSCH CC 200 consumo total de potencia: - kWweight de la máquina aprox.: - tDimensiones de la máquina aprox.: - mMovie:https://www.youtube.com/watch?v=lr-NrroeTtAt Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Diámetro de torneado sobre la cama: 380 mm diámetro de giro sobre el reposacabezas: 190 mm longitud de torneado: 1000 mm Consumo total de potencia: 4 kWweight de la máquina aprox: 2 tDimensiones de la máquina aprox: 2,5+1+1,8 mPelícula: https://www.youtube.com/watch?v=ckpr4-sE7K4Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro de torneado: 220 mm longitud de giro: 450 mm. control: Siemens 840 D transmisión principal DC: 27 kW, consumo total de potencia: 27 + 8,5 + 5 + x kWweight de la máquina, aprox. 6,5 tdimensiones de la máquina, aprox: 10 x 2 x 2 m. Película: https://www.youtube.com/watch?v=OffdO1J4G5YTos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 240 mm turning length: 530 mm control: Siemens 810 D Powerline swing diameter: 560 mm x-travel: 207,5 mm z-travel: 530 mm turning speeds: 6000 U/min : 12 Stk. total power requirement: --- kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 220 mm turning diameter over slide rest: 120 mm turning length: 450 mm speeds infinitely variable: 315-2000 U/min. spindle bore: 23 mm tailstock quill taper MT: 2 total power requirement: 0,37 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1,08 x 0,45 x 1,18 m Electric 380 Volt: chuck: 110 mm Base unit: Center: Boring chuck: Diverse turning tools: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 370 mm turning diameter over slide rest: 200 mm turning length: 1000 mm centre height: 185 mm spindle bore: 56 mm tailstock quill taper MT: 4 turning speeds: 50 - 2000 U/min power capacity: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty t ...

turning length: 800 mm turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning speed range: 24 - 2800 U/min spindle bore: 38.0 mm centre height: 165 mm total power requirement: 3.5 kW weight of the machine ca.: 850 kg. dimensions of the machine ca.: 1850 x 800 x 1700 mm from a vocational school - in good condition () particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - EMERGENCY stop button - Operating instructions The data for this ad ...

Este Weiler E50 se fabricó en 2009. Una robusta máquina de torneado horizontal con un diámetro de giro sobre la cama de 570 mm y un diámetro de husillo de 83 mm. Ofrece una cama de 350 mm de ancho y una sección transversal de la herramienta de torneado de 32 x 25 mm. Ideal para operaciones de giro precisas y eficientes. Contacta con nosotros para más información sobre esta máquina.