tornos usadas para la venta (3,123)

Miyano BNA-42 MSYYear of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:6.000 rpmPower (max.):7,5 kWTorque (max.):60,8 NmBarcapacity:42 mmC-Axis:0,001°Workpiececlamping:Collet chuck, Type 173ESubspindle:Technology:Belt-driven spindleSpeed:5.000 rpmPower (max.):5,5 kWTorque (max.):38,7 NmC-Axis:0,001°Workpiececlamping:Collet chuckMovement in X/Z:140/310 mmRapid travers in X/Z:12 m/minToolcarrier (X/Y/Z):Technology:Turret with 8 stationsTooldrive:5.000 rpmMovement in X/Y/Z:140/70/235 mmRapid travers in X/Y/Z:20 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Cooling pumpRawmaterialfeed:Bar laoder, IEMCA Master 80 HFFinishpart removal:Part catcher with conveyorbeltFire-extinguishing unit:Kraft + BauerFurther Equipment:Trafo

Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...

X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool  ...

Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.

La máquina tenía mantenimiento anual por parte de Okuma Centro de torneado y fresado CNC con 9 ejes CNC, Okuma MacTurn 350 W, Año de fabricación 2004, OSP-E 100L, Revista adicional, Compartimento de 80 Ww para el polvorín, Husillo principal con eje C, husillo contrario con eje C, Eje deslizante y superior / husillo de fresado, Montando HSK 63, Eje B escalonado como eje de fresado, Ancho central 1500 mm, Diámetro del husillo de 80 mm, Circulación máxima: 550 mm, Giratorio 350 mm, Revólver inferior de 12 capas con revólver aplicado. herramientas, Sistema de Filtros Compactos Interlite 900 l, succión, Tiempo de funcionamiento del husillo aprox. 18300 h, Päneförderer, Brazo de agarre del cambiador de herramientas completamente renovado, Refrigeración a alta presión, Brazo medidor WZG, Cambiador de herramientas revisado, Husillo principal Kitagawa B - ...

Weiler DZ 40, Año de fabricación 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Diámetro de giro 180 mm, Bobmkney Ev Iujrzedf Circulación Ø máx. 560 mm, Eje Y +/- 25 mm, Eje Q / pau trasero programable, El eje Q recorre 360 mm, Sistema de medición en el eje Q rotativo, Contrapunta MK 4, Máximo paso de caña del husillo principal 42 mm, Diámetro del husillo 52 mm, Travesía rápida X/Z/Q 30/30/20 m/min, Torreta 16 velocidades - todas las estaciones accionadas, VDI 25, Diámetro del eje 25 mm, Solicitado. Herramientas de hasta 4.500 rpm, Bandeja de piezas, accesorios, Solicitado. Portaherramientas, Sostenidores rígidos,

Maestro de Gremio CTX 510 Control: Siemens 840 D con Taller - Giro Año de fabricación: 2004 Viaje X / Z: 300 / 1050 mm Revólver: 12 velocidades Portaherramientas: VDI 40 Bsbmezmxz Roknrzodf Velocidad del husillo hasta a: 3.500 rpm Paso de barra: 90 mm Recorrido de la pluma: 150 mm Contrapunto Refrigeración a 20 bar Tamaño del mandril 315 mm Horas aproximadas del husillo: 14.000 Se produjeron lotes de 0 a 5 en la máquina La programación se realizaba en la máquina

This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.

Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.

Poder del usuario

A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.

Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details.

A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.

Control Philips B2T Diámetro circunferencial: 640 mm Diámetro de mecanizado longitudinal 550 mm Diámetro de mecanizado en la torreta de tambor 450 mm Longitud de torneo 1000 mm Velocidad del husillo: 2.240 min-1 Diámetro del husillo 103 mm Torreta de tambor de 12 velocidades VDI 60 Transportador de astillas

Key data: 110 mm, 450 mm, 5600 1/min

Año de fabricación 1996 Control: TX8 F incluyendo el alimentador Simag de 42,1 bares Año de construcción 2003 El alimentador de barras es un máximo de aproximadamente 3,2 m para 3 m de barras. Con muchos accesorios La máquina sigue bajo energía y disponible con poca antelación

Monforts DNC 3Year of manuf. : 2000 Control : Siemens 840D - Powerline Turning diam. : 150 mm____________Description:Mainspindle:Speed:5.000 rpmPower (max.):25 kWTorque (max.):263 NmBarcapacity:65 mmSubspindle:Speed:5.000 rpmPower (max.):25 kWTorque (max.):263 NmToolcarrier I (X/Z):Technology:Turret with 12 stationsTaper:VDI 30Tooldrive:4.500 rpmMovement in X/Z:170/445 mmRapid travers in X/Z:24/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI 30Tooldrive:4.500 rpmMovement in X/Z:170/445 mmRapid travers in X/Z:24/30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Coolant pumpsRawmaterialfeed:Interface Barloader:Attention:Displayed Clamping devices and tools are NOT included in our offer!

turning diameter: 720 mmturning length: 4000 mmcontrol: Siemens 805 turn - diameter over facing slide: 360 mmspindle diameter: 100 mmspindle passage: 100 mm3-jaw-chuck diameter: 400 mm4-jaw-chuck diameter: 250 mmsteady: 360 mmtotal power requirement: 22 kWweight of the machine ca.: tdimensions of the machine ca.: mIncluded:4-jaw turrets and coolant.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Ma ...

turning diameter over bed: 1300 mmturning diameter over slide rest: 900 mmturning length: 8000 mmspindle diameter: 153 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mTurning length (mm) 8000Max. turning diameter (mm) 1300Max. turning diameter over slide (mm) 900Max. turning diameter in the offset (mm) 1580Spindle diameter (mm) 153Speed 7 - 500 (12x)kW 37Voltage 400VHz 50Powered tailstock, powered quill, coolant system, 4-jaw chuck Ø 1,000 mmSteady rest roller type Ø 60 - 300 mmSteady rest roller type Ø 200 - 600 mmTaper turning attachment, 4-way toolpostThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,0 ...

spindle passage: 230 mmturning diameter over bed: 970 mmturning diameter over slide rest: 720 mmControl: Fanuc OiTD turning length: 2200 mmtotal power requirement: 37 kWweight of the machine ca.: tdimensions of the machine ca.: mYear of manufacture 2013Control: Fanuc OiTDOther controls possibleTurning length (mm) 2200Max. turning diameter (mm) 970Max. turning diameter over slide (mm) 720Spindle diameter (mm) 230Diameter range (mm) 850Speed: 500kW 37Voltage: 400VHz 50Including:4-jaw chuck, Ø 800 mm rearPneumatic 3-jaw chuck, Ø 600 mm frontThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interest ...

turning diameter over bed: 1150 mmturning diameter over slide rest: 800 mmturning length: 6300 mmspindle diameter: 100 mmspeed: 4-800 (x24) U/minturning dia. in gap: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mRapid toolpostPower compoundRapid traverse4-jaw chuck ø (mm): 800Fixed steady rest ø (mm): 2x 400Through-spindle coolingThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We lo ...

swing diameter: 2200 mmcentre distance: 9500 mmturning diameter over bed: 2200 mmworkpiece weight: 70 tturning speeds: . U/min4-jaw-chuck diameter: 2100 mmcontrol: Siemens type: Sinumerik 850 T mmtransmission ratio: . total power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: mSingle CarriageTailstockHydrostatic BedChip ConveyorSerial Number: 27486The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look  ...

turning diameter over bed: 4000 mmturning diameter over slide rest: . mmturning length: 5000 mmtotal power requirement: 30 kWweight of the machine ca.: . tdimensions of the machine ca.: . mSpecificationsTurning length (mm) 5000Max. turning diameter (mm) 4000Max. turning diameter at offset (mm) 5000Speed 1.4 - 71 (18x)kW 30Voltage 380VHz 50Including:4-jaw faceplate Ø 3150 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwa ...

turning diameter over bed: 930 mmturning diameter over slide rest: 630 mmturning length: 8000 mmspeed: 800 U/minspindle passage: 105 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m4 Jaw chuck Ø 800 mmSteady rest Ø 40 / 400 mmSteady rest Ø 400 / 600 mmTaper turning attachmentCoolant systemThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch Te ...

turning diameter over bed: max.: 4000 mmturning diameter over slide rest: . mmturning length: 7500 mmspeed: 0-750 u/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1650 mmturning diameter over slide rest: 1200 mmturning length: 7500 mmturning dia. in gap: 2500 mmspindle diameter: 105 mmspeed: 3,55 - 180 (x24) U/minvoltage: 380 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m4-jaw faceplate Ø 1.600 mmSteady rest Ø 700 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe da ...

swing diameter: 436 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mIt is a unit price. There are 6 pieces available. The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1070 mmturning length: 8500 mmcontrol: Alan Bradley 9 Series Turning diameter over slide: 800 spindle diameter: 130 mmspeed: 1,12 - 1120 m/minvoltage: 480 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3 Shear Bed, Carriage can bypass Steady Rest and Tailstock8-position Sauter Turret360 mm Capacity Self Centering Turn Thru Hydraulic Steady Rest385 mm Capacity Rotaring Work Support800 mm 4-Jaw ChuckChip ConveyorThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please conta ...

turning diameter over bed: 1000 mmturning diameter over slide rest: 640 mmturning length: 6300 mmturning dia. in gap: 1250 mmspindle diameter: 50 mmspeed: 6-925 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCoolant 3-jaw chuck Ø 500 mm 4-jaw chuck Ø 900 mm Steady rest Ø 300 mm Steady rest Ø 560 mm Power compound Multi Fix ToolholderThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We  ...

This 2-Axis lathe was manufactured in 2015. Featuring a Fanuc 0i-Mate TD control, it offers a speed range of 50-6000 min-1 and rapid traverse speeds up to 30000 mm/min. Equipped with a hydraulic 3-B chuck and hydraulic tailstock MK5, it ensures efficient operations. Weighing 5000 kg and with dimensions of 3300 x 1700 x 1700 mm, it’s robust yet space-efficient. Consider the Knuth Starship 400 for precise turning operations. Contact us for further information.

Key data: 475 mm, 1000 mm

torno ciclista muy poco usado con cambiador de herramientas - 5940 horas Para datos técnicos, véase factura de compra Control Fagor 8055i FL con forro La factura y el vídeo pueden enviarse bajo petición. ¡Se puede probar bajo potencia!