tornos usadas para la venta (3,123)

Torno CNC Fabricante: Gildemeister Tipo: CTX 410 V3 Máquina nº: 0136004581 Año de fabricación: 2006 Control: Siemens 840D ShopTurn Diámetro circunferencial: 505 mm Diámetro del mandil: 210 Paso del husillo: 65 mm Potencia de transmisión: 40/100% ED 21/28 KW Rango de velocidades de – a: 25-5000 Dimensiones aproximadas: 4300x2000x1800 Peso aprox.: 5600 kg - Revólver de 12 velocidades - VDI 40 - Eje C - Herramientas eléctricas: 12 estaciones - Mecanizado de barras de empaquetado - Transportadores de astillas - Contrapunto - SMW Autoblok 210BB - Portaherramientas accionados 3x axiales - Portaherramientas accionados 2x radiales - Diversos otros portaherramientas - Nuevo motor para revólver Exceptuando errores

Torno CNC Fabricante: Gildemeister Tipo: CTX 420 Lineal V4 Máquina nº: 02260005181 Año de fabricación: 2005 Control: Siemens 840D ShopTurn Diámetro circunferencial: 680 Diámetro del mandil: 250 Potencia de tracción: 40/100% de alimentación eléctrica: 37/25 KW Rango de velocidades de – a: 20-5000 rpm Peso aprox.: 6500 Kg - Revólver de 12 velocidades - VDI 40 - Eje C - Eje Y - Herramientas eléctricas: 12 estaciones - Transportadores de astillas - Contrapunto - SMW Autoblok 250 BH Exceptuando errores

Torno CNC Fabricante: Gildemeister Tipo: CTX 310 Locomotora nº: 8042942713C Año de fabricación: 2008 Control: Heidenhain IT Diámetro circunferencial: 500 mm Pasaje de huso: 65 Potencia de tracción: 40/100% ED: 16/12 KW Rango de velocidades de – a: 25-6000 rpm Peso aprox.: 3500 Kg - Revólver de 12 velocidades - VDI 30 - Transportadores de astillas - Eje C - Herramientas eléctricas: 12 estaciones - Mecanizado de barras de empaquetado - LNS QuickLoad Servo 3, cargador corto - Contrapunto - Hainbuch ToplusMini Axzug 65 Exceptuando errores

An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.

Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Varios portaportaobjetos de cambio rápido / portaobjetos de cambio rápido / accesorios en total 42 PCS: 7 piezas WDL 4/50 16 WDR 4/40 10 piezas WDL 4/40 3 piezas WB 4/60⌀ 3 piezas. WBW 4/60⌀ 1 pcs. WBW 23/60⌀ 2 piezas sin tipo Por favor, háganos saber qué artículos le interesan para recibir una oferta. Estamos encantados de proporcionarte más fotos.

Aquí tenemos una Weiler DZ 65, torreta Duplomatic Popa de 16 pliegues, 2 husillos, cabeza de pineta para ambos huses, herramienta accionada en todos los puntos de Rev, Transportador de astillas, refrigerante a través de 2 husos, eyector de resorte en segundo husillo, conexión del alimentador de varillas, retirada de piezas mediante bandeja de goteo, cinta transportadora de piezas, varios tubos de inserción en el husillo, transportador de astillas, alimentación de material Irco Profimat 3m,

Lathe Colchester Bantam VS 3500

Lathe Gildemeister NEF 320 K BJ 2002

Lathe Gildemeister CT 60 BJ 1990

Centro de giro vertical de dos husillos - Control Siemens 840 D - Camilla de máquina VSC 400 Duo - 2 torretas de disco de 12 x diámetro 40 mm, accionadas - 2 estaciones adicionales de perforación y afondado - Sistema abierto de transporte de piezas - Unidad de transferencia y torneado - Interfaz con un sistema de manejo externo - Centro central de refrigeración, bomba de alta presión 70 bar - Soplado del dispositivo de recogida y de los dispositivos de sujeción - Medición de la pieza - Monitorización de herramientas - Opción de red Emag - Gestión de herramientas hermanas Diámetro circunferencial: 260 mm X-travel 860 mm Z-recorrido 200 mm Husillo principal 2 Velocidad máxima hasta 4500 1/min Espaciado entre husillos 1055 mm Atracción principal 2 Motor AC Asincrónico 6ß/100% ED 39/28 KW Par máximo 460 Nm Travesía rápida x/ z 45/ 30 m/min

Diámetro de la barra: 8 mm a 65 mm (material redondo) Longitud de la caña (33L): aprox. 3,3 metros Tipo de máquina: Cabeza de husillo fija (tornos automáticos) Tipo de cargador: Cargador MP (cargador múltiple)

A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...

turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.