trabajo con chapas de metal usadas para la venta (3,268)

: R10-R260 bending speed: 2,5 U/min: 54,0 x 2 mmSheet thickness aluminum: 54,0 x 2 mm: 42,4 x 3 mmsheet thickness for stainless steel: 42,4 x 2 mm: 30 mm: einphasig - 230 Vdrive motor: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 363 x 900 x 595 mm‘ERCOLINA MEDI BENDER’Single-phase mandrel-less bending machine up to 42 mmFeatures:- Control system: Soft-touch control panel in 8 different languages- Number of programs: 30, each with 9 bends- Standard accessories (including foot switch, user manual)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-45833-26

Prensa hidráulica para crimpar mangueras hidráulicas, equipada con todos los dados necesarios para mangueras 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 800 x 1000 mm Peso: 270 kg Auction-ID: A7-45834-60

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías de 0,5 a 50 mm, nunca se utilizó a 0 horas y se empaquetó en una caja de madera Dimensiones totales: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-45833-228

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 800 x 1000 mm Peso: 270 kg Auction-ID: A7-45834-35

Prensa hidráulica para crimpar mangueras hidráulicas, equipada con todos los dados necesarios para mangueras 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 800 x 1000 mm Peso: 270 kg Auction-ID: A7-45833-60

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 800 x 1000 mm Peso: 270 kg Auction-ID: A7-45833-35

Prensa hidráulica para abrir tuberías hidráulicas, equipada con todos los troqueles necesarios para tuberías 0. De 5 a 50 mm, nunca usadas 0 horas, empaquetadas en caja de madera Dimensiones totales: 1000 x 1000 x 1400 mm Peso: 310 kg Auction-ID: A7-45834-26

: gebraucht : WA0041 : 790 €: 1 : 835 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Auction-ID: A7-45364-3

Punching capacity: 220 kNlaser capacity in Watt: 4000 travel -x axis: 3050 mmtravel -y axis: 1550 mmCutting capacity structural steel: 8 mmCutting capacity stainless steel: 8 mmCutting capacity aluminum: 6 mmworkpiece weight: 280 kgweight of the machine ca.: 24.000 kgdimensions: 10130 x 8898 x 2328 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1020 mmplate thickness: 2.5 mm: 45.0 mmbending angle max.: 0 - 135 °weight of the machine ca.: 285 kgrange L-W-H: 1175 x 850 x 1175 mmDescription:Swivel bending machine with patented hydraulic auxiliary cylinder andRemote control. The machine is both manual (for thinner sheets) andmotorized (for thick sheets) operated. The motorized function is overa remote control operated with an emergency stop.Version S - with segmented upper beam for boxes and special profiles- Max. Bending angle 135 °- Max. Opening upper beam 45 mm- The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported- The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated.- the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 €: 1014.93 €: 2050 mm: 16 mm: 16 mm: 13 mm: 13 mm: 10 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1550 mm: 6100 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are r ...

Grosor de la placa: 4,0 mm. Diámetro del rollo: aprox. 120 mm. Garganta: 450 mm. Consumo total de potencia: kWweight de la máquina, aprox. 0,48 tDimensiones de la máquina, aprox. 1,3 x 0,8 x 1,8 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 1250 mm Grosor de la placa: 1,5 mm Distancia entre columnas: 1300 mm Apertura a la luz: 80 mm: 155 Consumo total de energía: Handbetrieben Peso de la máquina aprox: 0,18 Dimensiones de la máquina aprox: 1,4 x 0,8 x 1,3 m Máquina de doblado segmentos Anchos de segmentos: 2x50mm, 1x70mm, 2x75mm, 2x100mm, 4x150mm, 1x170m. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 2000 mm Grosor de la placa: 3,5 mm Distancia entre columnas: 2050 mm Apertura a la luz del día: 355 mm Consumo total de potencia: kWpeso de la máquina aprox: 2,8 tDimensiones de la máquina aprox: 3,5 x 1,5 x 1,5 m - Preselección de ángulo de flexión mediante interruptores de límite Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Ancho de la lámina: 2500 mm, grosor de la placa: 4 mm, peso de la máquina, aprox. 5.000 kg. Dimensiones de la máquina, aprox. 3000 x 2000 x 1700 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

pressure: 70 -800 kNchamfer lenght: 2505 mmdistance between columns: 2125 mmControl: OP 2000 controlled axis: 7 throat: 420 mmstroke: 200 mmdayligth: 470 mmNumber of working hours: htable width: 60 mmtable height: 960 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secweight of the machine ca.: 6,3 tPatented Amada technology ensures absolutely correct bending results withoutbombing deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6,0 mmdistance between columns: 3000 mmcutting angle: 0,5 - 3 °no. of strokes: 9 / 14 Hub/mindown holder: 18 total power requirement: 10 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 3750 x 1600 x 1650 mmFeatures:- Hydraulic / slide-guided sheet metal guillotine shears- Electric backgauge 10-750 mm- Electric cutting angle adjustment- Manual cutting gap adjustment- 1x side stop- Front finger guard- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

Ancho de la lámina: 1270 mm Grosor de la placa: máximo 4,5 mm: 4 mmroll diámetro: 120 mmroll Velocidad: 8 U/min. Diámetro de flexión: 180 mm Potencia total requerida: 2,2 kWweight de la máquina aprox. 1250 kg Dimensiones: 2470 x 750 x 1000 mm Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

sheet width: 3050 mmplate thickness: 10 mmcontrol: Elgo 87 P2 : 11 - 31 Hub/mincutting angle adjustment: 1 - 4 °Number of hold downs: 16 Stück: 900 kg: 11 kWtable width: 700 mmtable height: 800 mmrange L-W-H: 4000 x 2220 x 1830 mmweight: 6300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 0,5 - 3 °down holder: 18 Stkno. of strokes: 9-17 Hub/mintotal power requirement: 7,5 kWdimensions of the machine ca.: 3800 x 2000 x 1600 mmweight: 4500 kgEquipment:- electric backgauge- electric cutting angle adjustment- manual cutting gap adjustment- SP 9 control unit- Safety guard behind the machine incl. light barrier- front finger guard- 1x side stop- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 1,2 °down holder: 14 Stkno. of strokes: 18 Hub/minoil volume: 150 ltotal power requirement: 11 kWdimensions of the machine ca.: 3900 x 1900 x 1600 mmweight: 5500 kgEquipment:- Hydraulic swing cut shears- ELGO control system- Electric backgauge 1000 mm- Manual cutting gap adjustment- Cutting length limitation- Ball rollers in the table- 2x front support arms- 1x front side stop with scale- Front finger guard, hinged- Rear safety device (protective grille + light barrier)- Foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 16 mmdistance between columns: 3100 mmno. of strokes: 16 Hub/minback stop - adjustable: 10 - 1000 mmcutting angle: 0,5 - 2,5 °down holder: 13 Stückoil volume: 300 ltotal power requirement: 22 kWweight: 14000 kgdimensions: 4100 x 2300 x 2000 mmFeatures:- Electro-hydraulic slide-guided sheet metal shear- With ELGO P9724 NC digital control unit Input of target/actual values from the backgauge possible Digital display- Electro-hydraulic cutting angle adjustment- Electro-hydraulic cutting gap adjustment- Front finger guard- 1x sturdy side stop, with T-slot & mm scale- 3x front support arms- Hydraulic sheet metal hold-down- 2x emergency stop buttons at the front- Rear safety guard (protective grille)- Original operating manual Special accessories included:- Backgauge system conveyor belt with pneumatic sheet metal holding device Conveyor belt with pneuma ...

pressure: 36.0 tstroke: 250 mmflat steel: 200 x 10 mmworking feed: 6.0 - 24.0 mm/minreturn speed: 60.0 mm/minwork height max.: 900 mmtable:: 580 x 1170 mmtotal power requirement: 4.1 kWmotor: 400 Volt 50 Hzoil volume: 60.0 ltr.weight: 1100 kgrange L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on requestFeatures:- Electro-hydraulic horizontal bending machine- Large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting- Several/various bending tools- Infinitely variable adjustment of bending speed and pressing force- 1x freely movable double foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 10 mmnumber of rolls: 21 Stückroll diameter: 80 mmband speed: 12 m/minstraightening cross-section: 5700 mm²Control: total power requirement: 60 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.