rectificadoras madera usadas para la venta (637)

Dimensions (L/W/H): 2440x1360x2060 mmWeight: 3000 kgTotal power requirement: 42 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1600x1500 mmWeight: 540 kgTotal power requirement: 3 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2260x2060x2230 mmweight: 3700 kgtotal power requirement: 57,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4410x3050x2727 mmWeight: 13070 kgTotal power requirement: 172 kwWide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 13502620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/50h ...

Dimensions (L/W/H): 2850x2050x2200 mmWeight: 5150 kgTotal power requirement: 78 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1320x660x850 mmWeight: 170 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sanding machine Brand: Ecoline Type: Windsand 4 New machine for sanding panels and glued frames. Technical data: Dimensions workpieces: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shaft: 7 pcs. Power: 12 kW Air pressure: 6-8 bar Suction studs: 5 x Ø120mm Suction power: 6000m³/h Units 2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. Power of both brushes 0,55 kW 1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. Power 0,55 kW 1 upper sanding lamella roller for surfaces, Ø 420 mm; length 1600 mm. Power 3 kW 3 upper sanding discs, Ø 400 mm, for the perfect crosswise process of the the lengthwise and crosswise positioned wood fibres. Power of each disc 1,5 kW; All tools are frequency controlled.  ...

New brushing machine Brand: Ecoline Type: Windsand 3 New machine for sanding panels and glued frames. 4-side processing Technical data: Dimensions workpiece: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shafts: 6 pieces Power: 12 kW Compressed air: 6-8 bar Suction stud: 5 x Ø120mm Suction power: 6000m³/h Unit - 2 vertical swivable brushes (left / right), diameter 350 mm, to sand the profiled surface of the panels and window frames. - Power of both brushes 0,55 kW - 1 Sanding lamella roller for surfaces, diameter 420 mm; length 1600 mm. - Power 3 kW - 3 upper sanding discs, diameter 400 mm, to process the lengthwise and crosswise positioned wooden fibres . - Power of each discs 1,5 kW; All tools are frequency controlled. All brushes are equipped with quick changable sanding lamellas. All discs will be equipped  ...

Unidad de lijado de perfiles IMA Tipo: 08.063

Unidad de lijado IMA Tipo: 08.062 -oscilante

Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991

Manufacturer: DMC, Type: UNISAND K/USK1100M3, Year: 2007, Monting of the machine: L/L/L , Equipment of machine 2: L/L/L, Double sided sanding line: yes, Sanding width mm: 1100, Number of sanding belts: 3 + 3, Weight in kg: 4050, Year :2007

Manufacturer: Sandingmaster, Type: SCSB 2 - 900, Year: 1980, Monting of the machine: Walze / Schuh, Sanding width mm: 900, Sanding hight mm: 140, Number of sanding belts: 2, Sanding belt dimensions: 930 x 1920, Band 1 Leistung kW : 11, Band 2 Leistung kW : 11, Year :1980

Manufacturer: Venyeskob Bürstenaufsatz, Year: ca.1990, Number of units: 2, Through running hight max mm: 120, Diameter of brushes: ca.300, Number of rotations controlled: yes, Units mounted inclined: yes, Fast exchange device: yes, Through running hight max mm: 120, Axle-diameter: ca.30, kW output motor: ca.0,75, Dust removal brush: Beizstation, Year :ca.1990

Manufacturer: Busch Schleifbürste Rotationschleifbürste, Type: Robatech 1300, Year: 2014, Control: Siemens, Software: Busch, Monting of the machine: 1 Schleifbürstenband, Number of units: 1, Working widht mm: 130, Through running hight max mm: 0-80, Number of rotations controlled: 30-140 m/min, Units mounted upright: Rotation 360 Grad, Fast exchange device: Bürstenbesätze, Through running hight max mm: 0-80, kW output motor: 5,5 Bürste/, Feeding speed continous adjustable: 4-12, Weight approx. kg: 3500, Required space L x W x H mm: 3840 X2400 X2000, Year :2014

Manufacturer: Viet Lackschleifmaschine, Type: Valeria, Year: 1996, Control: Viett, Monting of the machine: Walze, Sanding width mm: 1300, Sanding hight mm: 6-120, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Rollers: 1, Shore roller 1: 30, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-18, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Werkstück-Abstrahleinrichtung: yes, Year :1996

Manufacturer: Venyeskob, Type: Bürstenschleifmaschine, Year: 1998, Number of units: 3, Working widht mm: 40-300, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: 1, Units mounted inclined: 2, Through running hight max mm: 80, Feeding speed continous adjustable: 10-30, Exhaust diameter mm: 120, Year :1998

Manufacturer: Vollmer, Type: CMS 13M, Year: 1994, Bore diameter: 5 - 50, Max. disk diameter in mm: 200, Min-max external diameter mm: 20 - 525, Min.-max. tooth pitch mm: 26 , Year :1994

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Hersteller : Venyeskob , Type: VBS 1300, Year: 1996, Number of units: 2, Engine power - kW: 4, Diameter of brushes: 420, Number of rotations controlled: yes, Units mounted upright: no, Units mounted inclined: yes, Fast exchange device: yes, Polishing width mm: 1350, Axle-diameter: 50, Vacuum belt: yes, Feeding speed continous adjustable: yes, Entstaubungsbürste : no, Gewicht ca. kg : 3000, Year :1996

Manufacturer: Purete, Type: PRT-D2313, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/ Reinigungsbürste/Reinigungsbürste, Year: 2020 neu, Control: HMI, Number of units: 3, Diameter of brushes: 150 , Units mounted upright: yes, Working width mm: 1.320, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 2.000 x 1950, Year :2020 neu

Manufacturer: Purete, Type: PRT-D2306, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/Bürste/Bürste, Year: 2020 neu, Control: HMI, Number of units: 1 + 2, Diameter of brushes: 150, Units mounted upright: yes, Working width mm: 620, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 1.150 x 1.400, Year :2020 neu

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Manufacturer: Ernst, Type: 830 J-2, Monting of the machine: quer / längs / längs, Sanding width mm: 1380, Sanding hight mm: 3 - 120, Number of sanding belts: 3, Sanding belt dimensions: 5.400 x 150 + 3.150 x 1.400, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 15, Band 2 Leistung kW : 30, Band 3 Leistung kW : 37, Continous adjustable feeding speed m/min: 12 - 36, Intermediate sanding of lacquer: no, Constant table hight: ca 880, Vacuum table: 7,5, Brushing unit: 1,1, Weight in kg: 7.400,

Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013

Manufacturer: Bütfering AWS, Type: AWS 1100, Year: 1981, Monting of the machine: Kombiaggregat, Sanding width mm: 1100, Sanding hight mm: 120, Sanding belt dimensions: 1900 X 1150, Längsschleifaggregate: Kombi/Bürste, Band 1 Leistung kW : ca.10, Combi unit roller/shoe: yes, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: 0,5, Constant table hight: no, Year :1981

Manufacturer: Tagliabue, Type: L 600, Year: 1998, Monting of the machine: Walze/Walze, Sanding width mm: 600, Sanding hight mm: 0,5-30, Number of sanding belts: 2, Continous adjustable feeding speed m/min: 5-20, Feeding engine kw: ca.2, Sanding belt dimensions: ca.2620 X 630, Sanding belt speed m/sec: 2 Stufig, Power belt 1 in kW: ca12, Performance in kW belt 2: ca.12, Constant table hight: yes, machine ready for demonstration: yes, Year :1998