trabajo con chapas de metal usadas para la venta (3,193)

: 1050 mm: 5,5 mm: 5,0 mmroll diameter: 130 / 195 mm: 2,2 kW: 1050 kg: 2150 x 900 x 1200 mm- 2 central rollers driven by an electric motor- Swing-out upper beam- Conical bending device- separate control panel- self-braking main motor- CE mark/Declaration of ConformitySpecial equipment included in the price:- hardened rollers- Motorized rear roller adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Espesor de la placa: 1,2 mmDiámetro del rollo: 62 mmGarganta: 100 mmPeso de la máquina aprox.: 50 kgDimensiones de la máquina aprox.: 560 x 220 x 500 mm

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

Presión: 26 tCorte transversal de punzonado en MMC: 80 x 2,5 carrera: - mmPotencia total requerida: 1,5 kWpeso de la máquina aprox.: 3 tdimensiones de la máquina aprox.: 3 x 3 x 2,5 mNº 1096:Perforadora de revólver 26 a.EDEL, tipo SMO 26/660/12 construido en 1973 con profundidad de garganta 660 mmÁrea de trabajo: diámetro 80 x 2,5 mmPotencia de accionamiento: 1,5 kWAccesorios:Almacénde herramientas de 12 estaciones Varios punzones y matrices

angular steel - leg outwards: -- mmdouble T-iron on the x-axis: -- mmU-iron on the x-axis: -- mm: 50 mm: 150 mmthroat: 120 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,36 tdimensions of the machine ca.: 1,1 x 0,8 x 1,4 mExhibition machine NEW, year of construction: 2021The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel.The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.- Manual adjustment of the top roller with a handwheel- Vertical and horizontal work possibility- 3 driven rollers- Supplied with a standard roller set- Foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de corte: - mmgarganta: - mmdiámetro de la pieza en bruto redonda máx.: 500 mmdiámetro de la pieza en bruto redonda mín.: ? mmrequisito de potencia total: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: m

weight max.: 1200 kgworkpiece diameter: 20 - 800 mmtotal power requirement: 0,75 kWtraversing speed: 80 - 1600 mm/minweight of the machine ca.: 56 kgrange L-W-H: 520 x 470 x 390 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5000 kgworkpiece diameter: 250 - 2500 mmtotal power requirement: 0,75 kWtable turning speeds: 100 - 1000 mm/mindiameter of running wheel: 250 x 140 mmweight of the machine ca.: 800 kgrange L-W-H: 2200 x 2500 x 800 mm- For machining cylindrical workpieces- Flat frame- Castors with polyurethane coating- Clear controls- Infinitely variable speed- The control electronics are of a robust and closed housingprotected- With foot switch for start/stop- Drive with DC electric motors and gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 3 mmrear stop: 1000 mmdown holder: 18 Stkcutting angle: 0.5 - 1,0° 30° °oil volume: 150 ltotal power requirement: 5,5 kWweight: 4300 kgdimensions of the machine ca.: 3800 x 1950 x 1600 mmFurnishing:- electric back gauge 750 mm- front support plates with ball rollers- Light barrier behind the machine- Hydraulic cutting adjustment- Cutting gap regulation via handwheel- LED cutting edge lighting- 1x side stop with scale 1500 mm- 1x freely movable foot switch- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 40 mmpre-bending: 32 diameter of upper rolls: 460 mmdiameter of lower rolls: 420 mmside roll diameter: 360 mmpower capacity: 30 kWmin. bending diameter: 1380 mmweight of the machine ca.: 30,1 tdimensions of the machine ca.: 6,3 x 2,3 x 2,6 m4 Rolls Hydraulic Bending MachineStandard Features:- hardened and polished rolls- complete body made of ST-52 steel- hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls- top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered- separate control panel- oil cooler - conic bending- in accordance to CE-norm- Warranty 12 monthsOptional Accessories:- variable speed of rotation (5.858,00 Euro)- material feeding table (5.100,00 Euro)- center support (18.750,00 Euro)- 2 x side supports (15.000,00 Euro)The data for this ad  ...

Ancho de la chapa - máx.: 200 mmEspesor de la placa: 6 mmAcero plano: 70 x 7 mmBarra redonda de acero: 13 mmPeso de la máquina aprox.: 50 kgDimensiones de la máquina aprox.: 800 x 500 x 1800 mm

espesor de la placa: 0,8 mmgarganta: 180 mmdiámetro del rollo: mmpeso de la máquina aprox.: 22 Kgdimensiones de la máquina aprox.: 500 x 450 x 160 mmLa máquina de rebordeado está equipada con:- Interruptor de emergencia- Interruptor de pie- 7 piezas. Juegos de rollos

: Hebefix A10 peso máx.: 10 tpeso de la máquina ab.: 49 kg (2 Stück) kg:

espesor de la placa: 4 mmdiámetro del rollo: 125 mmgarganta: 200 mmpotencia total requerida: 2,2 kWpeso de la máquina aprox.: 0,48 tdimensiones de la máquina aprox.: 1,6 x 0,6 x 1,2 mm• 5 velocidades• Con pedal• Con motor de freno• Con parada de emergencia• Con ajuste hidráulico de rodillos• Con 4 juegos de rodillos

sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: Handbetrieben weight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: für Draht hydraulically tiltable: ja : 2 t Year: unbekannt : Hydraulik Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kgworkpiece diameter: 20-800 mmconnected load frequency: 230 Vspeed: 100 - 1000 mm/mintotal power requirement: 0,1 kWweight of the machine ca.: 65 kgdimensions of the machine ca.: 520x470x390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 250 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mmplate thickness: 3,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 95 mmtotal power requirement: 1,1 KWweight of the machine ca.: 420 Kgdimensions of the machine ca.: 1600 x 800 x 1200 mmMotorized sheet metal bending machine with:- Foot switch for left / right- manually adjustable rear roller- Hardened rollers- Conical bending- Swiveling top roller- Safety device emergency leash- Documentation currently only in English- 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Está disponible una máquina de cepillado y desbarbado de acero Lissmac. Ancho de paso: 1500 mm, espesor máximo de la hoja: 20 mm, medio: bloque de cepillado, dimensiones de la máquina X/Y/Z: aprox. 3100 mm/1400 mm/1800 mm, peso: aprox. 2300 kg. Documentación disponible. Es posible la inspección in situ.

sheet width: 170 mmplate thickness: 0 mmnumber of rolls: 0 weight of the machine ca.: 0,1 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peso máximo de la bobina: 3 t, ancho máximo de la banda: 500 mm, espesor de la banda: 0,4-5 mm, carga conectada: 0,55 kW. Con mando, enderezador y grupo hidráulico Rexroth, sin documentación. Es posible la inspección in situ.

Ancho del material: 300 mmEspesor del material: 3 mmCorte transversal: Peso de la máquina aprox.: 0,12 tDimensiones de la máquina aprox.: 0,5, 1, 1 mTrituradora de bobinas

diámetro del tubo: 12-54 mm (Kupfer / Edels. mmnúmero de serie: EBD 022 99 002 modo de funcionamiento: Schneiden/ Entgraden / Re velocidad: Rollen 450 U/min m/min

weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control panel: Boschert Stanze Year: 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de la hoja: 1020 mmespesor de la placa: 2,5 mmdistancia entre columnas: 1050 mmapertura de la luz diurna: mm: 135 potencia total requerida: Handbetrieben kWpeso de la máquina aprox.: 0,32 tdimensiones de la máquina aprox.: 1,4 x 0,6 x 1,3 mDobladorade segmentos Anchos de segmentos: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 y 260 mm.

Diámetro del tubo: bis 60 mmPeso de la máquina aprox.: 1,8 t

: 30 mm: 30 mmL-beam: 20 x 20 x 4 mmflat steel: 25 x 6 mmAxis diameter: 20 mmwork speed: 11 U/mintotal power requirement: 0,2 kWweight of the machine ca.: 80 Kgdimensions of the machine ca.: 0,6 x 0,6 x 1,5 mProfile bending machine with:- Foot pedal for right/left rotation- Digital display- 1 set of standard rollers- 3 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.