tornos usadas para la venta (3,122)

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 25-90 mmthreading length: 3000 mmthread pitch: 2-16 mmtotal power requirement: 25 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mmturning length: 100 mmcontrol: SIEMENS 840 D total power requirement: 35 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mE M A G (Germany)Vertical CNC Controlled Hard Turning and Grinding machinewith tool turret and workpiece handling SystemModel VSC 250 DS Year 2004 # M7 28.69324_______________________________________________________Turning Ø, max. 250 mmTurning length internal / external 100 mmWorkpiece length min./max. 29 – 100 mm6-positon tool turret Ø / swing-Ø 480/790 mmWorkpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mmFeed rate / Quick feed X/Z 45/30 m/min.Feed force X/Z  ...

turning diameter: 400 mmturning length: 915 mmcontrol: NUM Type 1062 T total power requirement: 12,5 kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mmturning length: 710 mmcontrol: SIEMENS SINUMERIC 840 total power requirement: 40 kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mI N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstockand INDEX CNC Control C 200 – 4 (SIEMENS)Model G 300 Year 1995 S/N 5000 65_____________________________________________________________Turning - Ø, with chuck, max. 300 mmSpindle bore 90 mmMax. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mmTurret head slide cross movement (Z-Axis) max. 140 mmTurret with 12 tool holder positions DIN 30 mmFeed range of turret slide /  ...

turning diameter: 150 mmturning length: 500 mmcontrol: total power requirement: 4 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mmturning length: 400 mmcontrol: SIEMENS SINUMERIC 840 C total power requirement: 40 kWweight of the machine ca.: 6.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 125 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,135 tdimensions of the machine ca.: 1,25 x 0,6 x 0,6 mSpeed in 6 levels 125 - 2000rpm.3-jaw chuck 125 mm.4-jaw chuck 125 mm. (Independent)Fixed bezel.Revolving bezel.4-fold steel holder.chip tray.back panel.spindle protection.Hardened bed rails.Longitudinal feed with left / right switching.Set of change gears.Associated Tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mmturning diameter over slide rest: 200 mmturning length: 900 mmturning diameter in the gap: 320 mmturning speeds: 75 - 2000 U/mincentre height: 160 mmspindle bore: 38 mmtailstock quill taper MT: 3 connected load frequency: 400 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,75 x 1,7 mSINO digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 250mmbezel fixedQuick-change steel holder with 4 pcs. steel holdermachine lightChip tray, chip protection wallHardened and ground bed trackslining protectionmachine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Estamos vendiendo un centro de torneado Haas ST-20 en nombre de un cliente. La máquina se instaló y nunca se utilizó de manera productiva., - Opciones de control, - paquete de opciones, - flujo de refrigerante a alta presión, - paquete de accesorios

Diámetro de giro: 60 mmLongitud de giro: 200 mmNúmero de correderas: Potencia total Requisito: 20 kWPeso de la máquina aprox.: TDimensiones de la máquina aprox.: M

turning diameter: 1250 mmswing diameter: 1160 mmturning height: 800 mmfaceplate diameter: 1000 mmtotal power requirement: 97 kWweight of the machine ca.: 25000 tdimensions of the machine ca.: mP I T T L E R (Germany)CNC Controlled Vertical Turning and Milling CentreWith Tool Changer and Pallet ChangerModel PV 1250 / 1-1 Year 1994 _______________________________________________________Turning Ø max. 1,000 mmSwing Ø max. 1,160 mmTurning length 800 mmX Axis - horizontal 1,300 mmY Axis - vertical 800 mmFeed / quick feed 16,000 mm/minMain spindle speeds 10 - 1,000 rpm !Main spindle speeds via separate C Axis 0.1 - 16 rpmPositioning accuracy of C Axis 360° + / - 5 Tool holder ISO 50Tool drive 22 kWMax. torque / spindle speed 315 Nm / 2,500 rpmPallet size 630 x 630 mmSpindle drive  ...

swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and  ...

diámetro de giro: 530 mm0: 620 mmAncho de la rueda: 20 mmdiámetro del rollo: 45 mmrequisito de potencia total: ohne kWpeso: 250 kgdimensiones de la máquina aprox.: 1,2 x 0,30 x 1,3 m

turning diameter over bed: 250 mmturning diameter over slide rest: . mmcentre distance: ca. 400 mmcentre height: ca. 125 mmturning speed range: 80 - 3000 U/minnumber of speeds: 18 spindle bore: 24 mmtailstock quill taper MT: 3 weight: ca. 400 kgdimensions: ca. 1200 x 650 x 1300 mm4-jaw-chuck diameter: 125 mmincluding Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws,collet chuck device incl. collets 1-20 mm (exept 5 and 10 mm) with 1 mm gradientMultifix size A with 3 interchangeable holders,chuck protection with shutdownThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Características técnicas: Fabricante: Spinner Tipo: SB-CNC Año de hacer: 1998 Control: Siemens 840D Recorridos: X 250 mm Z 285 mm Horas de conexión: 32.156 h Husillo principal: Velocidad del husillo: 5.000 rpm Paso del husillo: 42 mm Portaherramientas: Portaherramientas: Multifix A en viga lineal Dimensiones y peso Dimensiones: 2.100 mm x 800 mm x 1.600 mm Peso: aprox. 1.500 kg Condición Condición: Usado Funcional: Probado y completamente funcional Otros equipos y accesorios incluidos: Mandril de pinza Interfaz para alimentadores de barras La máquina tiene una elevación del cabezal de 10 mm.

: 350 mm: 0650 mm: : 175 mm: 42 mm: 315 mm: 3500 U/min : D1-4 DIN 55029 : 63 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P 300S-H Viajar: Eje X: 695 mm Eje Y con carrera: +150/ -150 = 300 mm Eje Z: 1.600 mm Eje B: 240, posicionamiento en 0,001 Eje C: 360, posicionamiento en 0,001 Eje W: 1.524 mm Diámetro de giro: 650 mm Longitud de giro: 1.500 mm Montura: HSK 63 Posiciones totales de la herramienta: 40 Accesorios: Eje XA y YA con sistema de medición absoluta directa (Escala Okuma ABSO) Medición durante el proceso con sondas de eje X/Z de Renishaw Medición en el eje Y, incluida la medición en modo de eje oblicuo KitagawaB215A11 máx. 2.800 rpm KitagawaB210A8 máx. 4.200 rpm Cilindro de apriete hueco Kitagawa F 2596-H01 96 mm IGF de un solo toque Software Multi-Herramienta Oscilación de velocidad armónica Paquete de software Mecanizado simultáneo de 5 ejes Transportador Depósito de refrigerante con bomba de alta presión 70b ...

Key data: 65 mm

Centro de torneado y fresado CNC Torno CNC utilizado Torno universal CNC Fabricante: Traub Tipo: TNA 300 Año de hacer: 1996 Husillo ø 65mm Contrapunto Herramientas motorizadas Transportador Control TX8H FlexIPS (en inglés) Mandril de pinza con pinzas de 5 mm a 65 mm Mandril de tres mordazas Varios portaherramientas fijos, giratorios y giratorios en ángulo Etcetera... incl. almacén de carga de barra Traub DNH 61 3000, año de fabricación 1996 ¡Incluye muchos accesorios! Ubicación de la máquina: Nahe 93047 Ratisbona La máquina se puede ver en el sitio. Todavía está energizado y funciona perfectamente. Nos encantaría saber de ti.

Torno CNC Okuma Genos L200E-M con pórtico Control: OSP-200LA-R Año de fabricación: 10/2012 Longitud máx. de torneado 380 mm Diámetro de torneado 200 mm Diámetro de giro sobre la cama 450 mm Velocidad del husillo: 107 - 4.500 rpm Paso del husillo: 66 mm Torreta: M-V12 (VDI) Herramientas de velocidad: 50 - 6.000 rpm Desplazamiento rápido m/min: X: 20 / Z: 25 Accesorios/Equipamiento - Cargador de pórtico tipo ATPGR-03 dimensiones de la pieza Ø 20 - 150 mm, peso de la pieza máx. 2 x 3 kg (Doble pinza) para OKUMA Genos L200E-M -Transportador - Ajuste de contacto - Contrapunto hidráulico -Bomba de refrigerante - Paquete de herramientas

6 husillos Repiqueteo Perforación transversal Rodillos roscados Aparatos de molienda Un montón de accesorios ¡Motor de alimentación (husillos) defectuoso! con alimentador de barras IEMCA PRA 40/32 P

Oferta 24177 Características técnicas: - Altura de la punta 180 mm - Anchura central 1000 mm - Gran circulación: por encima de la cama 355 mm - A través de trineos planos aprox. 200 milímetros - Diámetro del husillo: 36 mm - Cono de recogida de la caña de contrapunto MK 5 - Recorrido de la caña del contrapunto 260 mm - Velocidades del husillo 18 - 1800 rpm -Alimenta - Recorrido de la corredera transversal aprox. 200 milímetros - Recorrido de la corredera superior aprox. 115 milímetros - Accionamiento 400 V / 5,8 kW - con: - Contrapunto, forro de 3 mordazas, bisel - Soporte de acero, punzón central móvil, - Bandeja de patatas fritas - Necesidad de espacio aprox. 2500 x 1500 x 1200 mm - Peso aprox. 2100 kg

max. Spindle speed: 5000 U/min.travel -x axis: 160 mmtravel -z axis: 450 mmnumbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 mweight of the machine: 3700 kgCNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310Additional equipment:- C-AxisThe machine is in good condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: CTX310 | CTX-310The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura de la punta: 205 mm Ancho central: 1500 mm Ø circunferencial: sobre la cama 410 mm Diámetro del husillo: 47 mm Soporte de husillo: tamaño 6 Contrapunto cónico del pick-up: 4 MK Velocidades del husillo: 28 - 1250 rpm Avances: longitudinal/plano 0,03-1,3/0,008-0,33 mm/rev Pasos de rosca: 0,25 - 76 mm Conexión eléctrica: 380 V, 3 kW Espacio necesario: 2800 x 1100 x 1600 mm Peso: 1330 kg

Altura de la punta: 250 mm Ancho central: 2000 mm Ø circunferencial: sobre la cama 500 mm Diámetro del husillo: 50,8 mm Soporte de husillo: tamaño 6 Contrapunto del cono de recogida: 5 MK Velocidades del husillo: 22 - 2000 rpm Avances: longitudinal/plano 0,05-6,4/0,025-3,2 mm/rev Pasos de rosca: 80 - 1 mm Conexión eléctrica: 380 V, 5,5 kW Espacio necesario: 3600 x 1100 x 1500 mm Peso: 1875 kg

faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1500 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/minpower capacity - table: 100 kWTorque: 31784 Nm0: 218 kwweight of the machine ca.: 55 tDimensions:- Turning diameter on the faceplate 2000 mm- Faceplate diameter 1800 mm- Turning height with turning head L100 1500 mmPower on the ram:- Clamping force of tool holder or accessories 120,000 N- Max. Feed force Z and X axis 30,000 N- Drive power of the milling, drilling and grinding spindle 37 kW- Speeds for turning 10 - 3000 rpmTravels:- Axis X, horizontal support on the crossbeam -2270/+2275 mm- Axis Z, vertical support on crossbeam 1250 mm- Axis C, table rotation 360°Feed speeds:- Axis X 15,000 mm/min- Axis Z 15,000 mm/min- Axis C 3.25 rpmCoolant system:- Coolant ...

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.