tornos usadas para la venta (3,122)

turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho central: 1000 mm, diámetro de giro sobre la bancada / manivela / carro: 360 mm / 510 mm / 205 mm, diámetro del husillo: 42 mm, velocidad: 2100 rpm, dimensiones de la máquina X / Y / Z: aprox. 1950 mm / 900 mm / 1350 mm, peso: aprox. 750 kg. Es posible la inspección in situ.

turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Un torno DMT está disponible. Distancia entre ejes: 1000 mm, diámetro de oscilación sobre la cama / corredera frontal: 420 mm / 210 mm, altura de la cama: 340 mm, diámetro del husillo: 64 mm, diámetro del husillo: 115 mm, velocidad: 4000 rpm, diámetro de la pluma: 60 mm, carrera de la pluma: 140 mm, ancho de la corredera frontal: 210 mm, longitud de la corredera frontal: 640 mm. Dimensiones de la máquina X/Y/Z: aprox. 2150 mm/1150 mm/1700 mm, peso: aprox. 1800 kg, control: Heidenhain, horas de funcionamiento: aprox. 300 h. Documentación disponible. Es posible la inspección in situ.

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho de la punta: 430 mm Altura de la punta: 120 mm Diámetro del husillo: 23 mm Velocidades del husillo: 60-3000 RPM Cabezal de husillo cónico corto DIN 4 Contrapunto MK2 Avances de 0,03 a 2,5 mm Peso aprox. 360 kg Nueva pantalla digital Aikron de 3 ejes, freno del motor del husillo renovado, verificado técnicamente. Accesorios: Dispositivo de pinza, mandril de torno Soporte de acero de cambio rápido 

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 720 mmlongitud de torneado: 3.000 mmcontrol: FAGOR 8055 TC/B diámetro de torneado sobre la cama: 470 mmdiámetro del husillo: 92 mmnariz del husillo: DIN-55027-11 diámetro del husillo: 150 mmaccionamiento del husillo: 17 / 20,5 kWrequisito de potencia total: 28 kWpeso de la máquina aprox.: 5,7 tdimensiones de la máquina aprox.: mLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Key data: 210 mm, 305 mm, 5000 1/min

Torno CNC Marca: Gildemeister Modelo: CTX 200 Control: Heidenhain Pilot 1190 Año de fabricación 1996 Horas de conexión: aprox. 38.000 h Características técnicas Diámetro circunferencial sobre la cama 440 mm Diámetro circunferencial sobre el carro 210 mm Longitud de torneado 305 mm Paso de barra 42 mm Velocidad 5000 rpm Torreta 12 estaciones Portaherramientas 20 VDI Dimensiones de la máquina L x W x H 2800 x 1651 x 1771 mm Peso de la máquina aprox. 3000 kg Accesorios: Varios portaherramientas Mandril de pinza en el husillo principal Contrapunto Documentación

Control Fanuc 21T Diámetro de torneado 158 mm Diámetro circunferencial sobre la cama 340 mm Velocidad 6.000 min-1 Revólver de 8 velocidades Contrapunto mandril de 3 mordazas, mandril de 2 mordazas, mandril de pinza Collares Portaherramientas versátiles

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Hay tres tornos horizontales CNC Okuma disponibles. 1) Okuma LB 15 m. 2) Okuma LB 15. 3) Okuma LB 15 W. El Okuma LB 15 W está defectuoso. Es posible la inspección in situ. Posibilidad de venta individual.

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Con dos módulos de mecanizado, eje X: -50 a 725 mm, eje Y: -200 a 300 / -250 a 250 mm, eje X-, Y, Z de recorrido rápido: 18/12/30 m/min, longitudes de torneado: 1500/2000/2500/3200/4000/4500/6500 mm, diámetro de giro: 780/ 880 mm, diámetro del husillo de torneado: 92/123 mm, rango de velocidad del husillo principal: 0-3000/0-3000/2000/min, máx. Velocidad de la unidad de torneado/fresado: 5000/6000/10000/min, longitud máx. de la herramienta: 900/600/1000/300/900 mm, carrera de la pluma: 160/170 mm, carga conectada: 102 kVA, sistema de control: SINUMERIK ONE / SINUMERIK 840D sl, control del sistema de accionamiento: SINAMICS S120, peso: 17 t. Es posible la inspección in situ.

Está disponible un torno paralelo de precisión CNC Pinacho. Altura del centro: 180 mm, ancho del centro: 750 mm-1000 mm, diámetro de giro sobre la cama guía / deslizamiento longitudinal / deslizamiento transversal: 360 mm / 335 mm / 198 mm, ancho de la cama: 250 mm, orificio: 42 mm, velocidad: 4000 rpm, alimentación X / Z: 10 m / min, desplazamiento rápido X / Z: 10 m / min. Diámetro del vástago del contrapunto: 58 mm, longitud del vástago del contrapunto: 200 mm, cono Morse: MK3, recorrido mínimo de la luneta móvil/fija: 10 mm, recorrido máximo de la luneta móvil/fija: 70 mm/114 mm, control: Fanuc 0i. Documentación disponible. Posibilidad de inspección in situ

Diámetro de giro sobre la bancada / corredera frontal: 360 mm / 160 mm, distancia entre ejes: 800 mm, recorrido X / Z: 205 mm / 810 mm, velocidad: 3150 rpm, diámetro del husillo: 60 mm, posiciones de la herramienta: 8, desplazamiento rápido X / Z: 10 m / min. Dimensiones de la máquina X/Y/Z: aprox. 3300 mm/1800 mm/1800 mm, peso: aprox. 3300 kg, control: Traub System TX-8. Es posible una inspección in situ.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kW

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura del centro: 102 mmDistancia entre ejes: 450 mmDiámetro del husillo: 25 mmVelocidad del husillo: 220 - 2600 Peso de la máquina aprox.: TDimensiones de la máquina aprox.: MNo se ha comprobado que losaccesorios estén completos Los armarios no están incluidos en el volumen de suministro

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.