TMCI PADOVAN Tunnel Warmer 9 m² Tunnel Pasteurizer

Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details Year of manufacture: 2023 Output: 35,000 cans/h Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm Treatment surface: 9 m², single deck, 1 module Treatment time: min. 4.5 minutes Product temperature: 5 °C inlet, 25 °C outlet Spray water temperature: 40 °C Steam consumption: approx. 508 kg/h at 3 bar Make-up water: approx. 1 m³/h Instrument air: approx. 500 Nl/h at 6 bar Installed power: 9 kW Electrical supply: 400 V, 50 Hz Conveyor height: 1,200 mm ± 30 mm Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) Height: approx. 1,800 mm Service clearance: 800 mm around the machine Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2 at 6 bar, basin overflow DN 100, basin drain 1 1/2 BSP Equipment Single-deck tunnel warmer, 9 m², 1 module Multi-tubular heat exchanger for condensate recovery 1.1 kW blower for water recovery Tank with condensate booster pump Air conditioning unit Active infeed and outfeed conveyor Side inspection windows on the spray zone Siemens PLC with teleservice, touchscreen HMI with process overview Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability Built in 2023, currently installed and in operation Layout drawing available Availability on request Location: Albania