Taladradoras de columna (173)

Capacidad de diámetro en acero (diámetro): 25 mm garganta: 220 mm carrera de diámetro: 110 mm de cono MK: 3 MK Tamaño de la tabla: 350 rund mmfeeds: mm/Velocidad de giro: 100 - 2080 U/minconnected Frecuencia de carga: 400 V Requisito total de potencia: 0,9 KWpeso de la máquina aprox. 0,2 tdimensiones: 0,8 x 0,6 x 1,9 m Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Capacidad de diámetro en acero (diámetro): 40 mm garganta: 230 mm carrera de diámetro: 130 mmtaper MK: 4 MKtamaño de la tabla: 400 x 315 mm de giro: mm/Velocidades de giro: 105 - 1257 U/min Requisito total de potencia: 2,55 KWpeso de la máquina aprox.: 0,35 tdimensiones: 0,8 x 0,6 x 1,95 m Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

capacidad de perforación en acero (diámetro): 32 mmgarganta: 265 mmcarrera del orificio: 150 mmtaper MK: 3 MKtamaño de la mesa: 390 x 390 mmavances: mm/velocidades de giro: 100 - 3300 U/minpotencia total: 1,5 KWpeso de la máquina aprox.: 0,35 tdimensiones: 0,8 x 0,6 x 1,95 mPantalla no utilizada con:- Accesorio de corte de roscas- Velocidad variable del husillo- Sistema de refrigeraciónLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Boring power: 32.0 mmbore capacity in cast iron: 35.0 mmmorse taper: MK 3 spindle stroke: 120 mmthroat: 260 mmcolumn diameter: 110 mmtable:: 515 x 355 mmturning speeds: 80 - 1400 U/mintotal power requirement: 0.7 / 1.3 kWweight: 175 kgrange L-W-H: 750 x 520 x 1820 mm from a training workshop maintained condition ()Furnishing:- V-belt operated column drilling machine- adjustable drilling depth stop- Pole-changing drive motor- manual spindle feed via cross handle- Work table with 3x T-slots- Table height adjustment via hand crank- Front main switch- Connection cable including 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9103754The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 23.0 / 28.0 mmBoring depth max.: 140 mmCenter of spindle to wall or column: 300 mmColumn diameter: 125 mmSize of table plate: 415 x 385 mmSpeed: 100 - 2000 U/min.spindle taper MT: 2 MKvoltage: 380 VMotor output: 0.9 / 1.4 KWweight of the machine ca.: 225 kgDimensions (L/W/H): 900 x 600 x 1960 mm maintained condition ()Furnishing:- V-belt operated column drilling machine- Right/left running of the work spindle- Pole-changing drive motor- manual spindle feed via cross handle- Work table with 2x T-slots- Table height adjustment via hand crank- machined base plate with 3x T-slots- manual V-belt tension (front handwheel)- Connection cable including 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9103760The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacidad de perforación en acero (diámetro): mmGarganta: 290 mmCarrera de orificio: 180 mmPotencia total requerida: 1,9 kWPeso de la máquina aprox.: tDimensiones de la máquina aprox.: mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Capacidad de perforación en acero (diámetro): 40 mmgarganta: 325 mmCarrera de diámetro: 170 mmsuperficie útil: 730 x 590 mm0: 130 - 1200 U/minalimentación: 0,09 - 0,16 - 0,28 mm/Ucono de la herramienta: MK 4 requisito de potencia total: 1,8 kWpeso de la máquina aprox.: 0,7 tdimensiones: 1,2 x 0,8 x 2,15 mTaladro con:Alimentación2 engranajesRotación izquierda/derechaInterruptor de pieLuz de la máquinaLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 320 mmbore stroke: 150 mmspindle taper MT: 4 table-size: 500 x 400 mmspindle turning speed range: 75 - 3.010 U/minfeed range - boring: 0,1 / 0,15 / 0,22 / 0,33 mm/Uquill stroke: 150 mmvoltage: 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 275 kgdimensions of the machine ca.: 0,70 x 1,00 x 1,95 mthreading device: - Serial-No.: 138050673- Electromagnetic feed- Threading device- Machine vice 150 mm- Two clamping screws 14 mm- 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3- Cutting oil sprayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 245 mmbore stroke: 135 mmspindle taper MT: 3 table-size: 410 x 380 mmspindle turning speed range: 10 - 2100 U/minvoltage: 400 Vtotal power requirement: 1,1 kWweight of the machine ca.: 210 kgdimensions of the machine ca.: 0,7 x 1,8 x 1,75 mthreading device: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mmthroat: 400 mmbore stroke: mmtotal power requirement: 4,4 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 160 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 85 - 1800 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 0,85 / 1,5 kWweight of the machine ca.: 500 kg.range L-W-H: 965 x 515 x 1920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 132-1852 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 100-2000 U/mintable-size: 420x400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 160 mmthread capacity: 30 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 75-2100 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 70 mmthroat: 420 mmbore stroke: 260 mmthread capacity: 50 Mspindle taper MT: 5 MKcolumn diameter: 220 mmbore spindle turning speed range: 51-966 U/mintable-size: 600x600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 100-2000 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 132-1852 U/mintable-size: 420x400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 160 mmthread capacity: 30 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 75-2100 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmthroat: 385 mmbore stroke: 240 mmtable surface area: ø 500 mmspindle taper MT: 5 spindle turning speed range: 40 - 800 U/minfeeds: 0,1/0,14/0,2/0,28/0,4 mm/Ucolumn diameter: 220 mmdistance between table/spindle: max. 670 mmdistance spindle/base plate: 1180 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of machine L x W x H: 1,5 x 0,75 x 2,4 mAccessories: drill chuck, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23 mmthroat: 300 mmbore stroke: 150 mmtable-size: 300 x 410 mmspindle taper: MK 2 total power requirement: 1,4 kWweight of the machine ca.: ca. 315 kgdimensions of the machine ca.: ca. 700 x 900 x 1900 mmMachine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacidad de perforación en acero (diámetro): 23 / 28 mmtiro: 260 mm carrera del ánima: 120 mmconectador de la herramienta: MK 3 tamaño de mesa: 500 x 350 mm diámetro de la culata: 100 mmqueriedad total: 1,3 kWpeso de la máquina ca.: 400 kgdimensiones de la máquina ca.: 800 x 600 x 1750 mm¡Alimentaciónfectiva! Rotación derecha-izquierdaajuste de velocidad sin pasos

Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117 / 701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160 - 2250 UpMtotal power requirement: 1,45 / 1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection  ...