máquinas de soldar usadas para la venta (1,703)

Incluido: manguera de 3m Método: soldadura MIG/MAG (gas inerte metálico/gas activo metálico) Potencia: Rango de ajuste de 40 a 400 amperios Ciclo de trabajo: 60% de DE a 400 amperios. Auction-ID: A1-44739-17

-Consumo eléctrico 12 kVA -Fuente de alimentación de soldadura QINEO QINTRON 400 Pulse - Mesa giratoria integrada de 1 eje con placa de sujeción -Brazo robótico robot robot industrial de 6 ejes (marca CLOOS, probablemente base KUKA) - Recinto de seguridad Totalmente revestido con ventana de seguridad y boquilla de succión -Unidad de control portátil Teach Panel con interfaz CLOOS, claramente visible -Molduras exteriores Muy buen estado, mínima rozadura de pintura visible -Interior limpio, sin abrasión visible ni salpicaduras de soldadura -Brazo robótico Visualmente casi como nuevo, sin daños visibles -Máquina de soldadura por pulsos QINTRON 400 (tecnología moderna de arco pulsado) – en buen estado - Panel de Enseñanza de la unidad de control intacto y conectado, sin mensajes de error visibles -Tocadiscos Mecánicamente estable, sin desgaste visible Auction-ID: A1-44719-1

Corriente de soldadura: 30 a 430amperios Tensión de red: 400 voltios (3 fases) Ciclo de trabajo (ED): 40 % a 430 A, 60 % a 360 A, 100 % a 280Grado de protección: IP 23Clase de aislamiento: FIncluyendo: paquete de mangueras de 3 m Auction-ID: A1-44739-19

Auction-ID: A1-44739-18

Auction-ID: A1-41988-141

Auction-ID: A1-43823-15

Auction-ID: A1-43823-184

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mesa de soldadura inclinable y elevable, ranuras para sujeccion Dimensiones totales 800x500x800 mm Auction-ID: A7-44061-16

: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 €: 153.44 €: 1 : 47 to: 110 mm: 27 mm: 25x18 mm: 8 s: 16 mm: 700 bar: 479 mm: 135 mm: 388 mm: 117 kgMOBILE HYDRAULICS-POWERSTATIONDouble action - fully automated process of punching and returnWide range of hole diameters up to 27mmIntelligent control system with inching and automatic load detectionMode indicator lightProtection against accidental start-upOPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

potencia de soldadura: 40 - 350 / 12 - 40 A/V Voltaje de circuito abierto: máximo 56 V: Corriente de soldadura: 100%: 300 Velocidad de cableado: 0 - 24 m/min capacidad: 15,9 kVA Voltaje: 3 ~ 400 V: 50 Hz Refrigerante:: F Clase de protección: IP 23 Peso de la máquina aprox. 153 + 22 kg Dimensiones de la máquina aprox. 1,10 x 0,60 x 1,15 mMáquina de soldarCLOOS - GLC 353 MC 3- incluyendo Unidad de unidad de cable CLOOS - CK98 Los datos de este anuncio fueron creados con ModulMWS, la solución de software de LogoTech oHG.

current intensivity: 140 Aplate thickness: 1,5 mmwelding range: CO2: 35 - 225 Awelding range: 30Ar+CO2: 30 - 250 Aweight of the machine ca.: ca. 90 Kgdimensions of the machine ca.: 0,4 x 0,8 x 0,8 mCondition: ready for operation: Electric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mmwork height max.: 100 mmWeight: 120 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special Item: Messeeinsatz table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.400 kgTrade Fair TABLESlight signs of wear on the surfaceWelding table:- 6 legs - basic equipment 650 mm- Through-hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Side cheek made of high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilled holes Surface in diagonal grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Side panel holes in diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro: 16 mmweight: 13 kg. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 913 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.