Bancos de soldadura (93)

Lg.Nr. 26071 Datos técnicos: - Capacidad de carga 650 kg - Dimensiones de la placa frontal: 700 x 700 mm - Mot. de placa frontal infinitamente inclinable 0 - 135° - mot. Movimiento rotatorio ajustable infinitamente 0,07 - 1,5 rpm - Altura de la mesa en posición horizontal 890 mm - E. Botón Control - Espacio requerido aprox. A: 850 x Alto 890 x Largo 1200 mm - Peso aprox. 400 kg

Equipamiento técnico: Brazo de extracción del fabricante: Plymovent Tipo de máquina: Cabina de soldadura y soldadura / estación de trabajo manual Encimera: Encimera de acero con rejilla perforada Succión: 1x brazo de succión Plymovent con capucha de captura Monitor: 1x monitor de pantalla plana Escáner: 1x Escáner de código de barras Soplete: 1 soplete de soldadura/soldadura Suministro de medios: 1x placa de medios con gas, aire comprimido y conexiones de suministro Arma de aire disponible Revestimiento protector hecho de perfiles de aluminio y pantallas protectoras transparentes Bastidor de perfil industrial de aluminio Auction-ID: A1-49461-30

Lg.Nr. 25075 Mot. Mesa giratoria y basculante de soldadura Características técnicas: - Capacidad de carga 1000 kg - Diámetro de la placa frontal 800 mm - La placa frontal se puede inclinar mediante un motor - Movimiento giratorio electr. Ajustable de forma continua 0 - 250 cm/min - Transmisión de corriente de soldadura 650 A - Accionamiento 400 V / 2,8 kW - Altura de la mesa en posición horizontal aprox. 1100 milímetros - Rotación Re- + en sentido contrario a las agujas del reloj - Necesidad de espacio aprox. 1200 x 1100 x 1500 mm - Peso aprox. 850 kg

Equipamiento técnico: Brazo de extracción del fabricante: Plymovent Tipo de máquina: Cabina de soldadura y soldadura / estación de trabajo manual Encimera: Encimera de acero con rejilla perforada Succión: 1x brazo de succión Plymovent con capucha de captura Monitor: 1x monitor de pantalla plana Escáner: 1x Escáner de código de barras Soplete: 1 soplete de soldadura/soldadura Suministro de medios: 1x placa de medios con gas, aire comprimido y conexiones de suministro Arma de aire disponible Revestimiento protector hecho de perfiles de aluminio y pantallas protectoras transparentes Bastidor de perfil industrial de aluminio Auction-ID: A1-49461-60

Key data: 1180 mm, 990 mm, 765 mm

Mesa de soldadura y sujeción pesada 1.180 x 990 mm Alto: 765 mm Anchura de la ranura de apriete 34 mm Espesor del material 40 mm Peso aprox. 1.020 kg

No probados y usados Opción de visualización deseada Auction-ID: A1-49382-44

Tipo de máquina: mesa giratoria de soldadura Marca: Merkle / Conzelmann Tipo CD 50/25 - 320 Tensión de conexión 1 x 230 V Rango de velocidad 0.25 – 2.5 rpm, infinitamente variable Control de velocidad 1 : 10 Par 2.5 – 10 Nm Diámetro de la placa frontal 250 mm Placas frontales - paso interno 10 mm Ángulo de inclinación de la placa frontal 135 Capacidad de carga vertical 0,5 kN = 50 kg Altura de la mesa 320 mm Movimiento basculante manual, sujetable Par de inclinación 90 Nm Pantógrafo 400 A 80 % c.c. Conexión para - interruptor de pie simple - Doble interruptor de pie - Control remoto de pie Edad 3 años Estado: tan bueno como nuevo Peso 44 kg Garantía 24 meses a partir de la fecha de entrega Precio original 2.198,00 € + IVA Precio oferta 1.690,00 € + IVA Interruptor de pedal simple con cable de 3 mtr. 2 ...

Venta de la fábrica de caldelabra/farolas. Mesa de soldadura 202x300 cm Hecho a medida, no se puede desmontar. Calidad no verificada. Auction-ID: A7-49389-14

Mesa de extracción de humos de soldadura Mesa de soldadura DCE UMA150HG5 desempolvado Mesa de soldadura con aspiración integrada con filtro Fabricante de colectores de polvo para equipos de control de polvo Tipo UMA 150H G5 Descansa según fotos

Venta de la fábrica de caldelabra/farolas. Mesa de soldadura 151x255 cm (altura general 88 cm, altura máxima 105 cm) Hecho a medida, no se puede desmontar. Calidad no verificada. Auction-ID: A7-49389-12

características técnicas: - Capacidad de carga Tabla de posicionamiento aprox. 750 kg - Diámetro de la placa de lámina 500 mm - diámetro máximo de la pieza de trabajo 1600 mm - Tocadiscos de altura en posición horizontal aprox. 750 mm - Tocadiscos con la derecha, + carrera a la izquierda - Tocadiscos del eje rotativo sin fin 360 - Tiempo de giro por revolución 12,5 s. - Panorámica izquierda + derecha - Ángulo de rotación del eje pivote 180 - Tiempo giratorio para 180 ángulo giratorio 10 seg. - 2 x botón de pie doble para tocadiscos + brazo giratorio - hydr. Pernos de sujeción para sujetar la pieza de trabajo en el centro del tocadiscos - Carrera de sujeción / distancia de sujeción del perno de sujeción 32 mm - Prensado de fuerza de sujeción / tirando de 80 / 48.9 kN - Rosca interna del cilindro de sujeción M 27 x 40 - Control de posi ...

Venta de la fábrica de caldelabra/farolas. Mesa de soldadura 151x255 cm. Hecho a medida, no se puede desmontar. Calidad no verificada. Auction-ID: A7-49389-13

Auction-ID: A1-48474-209

Auction-ID: A1-48474-258

Auction-ID: A1-48474-99

Auction-ID: A1-48474-106

Auction-ID: A1-48474-210

table length: 2400 mmtable width: 1200 mmtable height: 880 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 214 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 530 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 554 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 124 bore: 28 mmweight: 326 kg4-283500consisting of:- 14x Professional screw clamp - nitrided -- 10x Professional screw clamp 45°/90° - nitrided- 8x Prism Ø 50 135° with screwed-in collar - nitrided- 36x Quick-clamping bolts without groove, double - burnished- 8x magnetic clamping bolts 68 - aluminum- 12x universal stop 150 L - nitrided- 12x universal stop 225 L - nitrided- 4x universal stop 500 S - nitrided- 12x stop and clamping bracket 175 L - nitrided- 2x stop and clamping bracket 300 G - nitrided- 2x stop and clamping bracket 500 G - nitrided- 1x stop and clamping bracket 500 G with rotation angle left - nitrided & stop and clamping bracket and clamping bracket 500 G with rotation angle right - nitrided- 1x stop and clamping bracket 750 G left - nitrided & stop and clamping bracketClamping bracket 750 G right - nitrided- 1x stop and clamping bracket 800 GK left - nitrided ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 392 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.553 kgProduct description:Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet.Welding table:- High-quality steel S355J2+N + plasma nitriding 200- Holes surface 100x100 mm grid- Corners, edges, and holes 45° chamfered- Holes side panel in diagonal grid- Construction reinforced by ribs- Includes basic foot equipment (working height 850 mm)Accessories:- 6 x professional nitrided screw clamps- 12 x quick-release bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping angle 175 L nitrided- 2 x stop and clamping angle 500 G nitrided- 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided- Allen key size 6- Brush Ø 30 with protective cap- CleanB ...

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 1 weight: 2,57 kgwidth: 265 mmheight: 250 mmclamping force max.: 3 kNThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mmSide panel height: 200 mmwork height max.: 850 mmweight: 850 kg Special item - fair use - high-quality steel S355J2+N + plasma nitriding- Side panel holes in diagonal grid- Corners, edges and drill holes chamfered 45°- Construction reinforced with ribs- incl. basic foot equipment (working height 850 mm)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 300 mmbore: 28 mmweight: 830 kg Special item – fair use Includes:Siegmund Sub Table BoxIncludes 2 drawers and 2 rubber matsLockable- Case-hardened tool steel X8.8 + plasma nitriding- Material thickness approx. 24.5–27 mm- Side panel made from high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Surface holes in a diagonal grid- Corners, edges and holes rounded- Side panel height 300 mm- Side panel holes: 3 rows spaced 50 mm apart, 2 rows spaced 100 mm apart- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise set-ups- Table base 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1075 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kgProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 690 mmtable load: 500 kgswivelling range: 0 - 90 Gradtable load: horizontal 500 Kgtable load: vertikal 250 Kgboring diameter: 100 mmtable turning speeds: 0,2 - 1,9 U/mintotal power requirement: 0,37 kWThe D-BYT N welding manipulator has a hollow shaft, also known asSpindle bore in the rotary table, which makes inert gas welding possible. theDue to the compact design, turn-tilt tables can be installed in anyintegrate existing production facilities. Inert gas welding (forming gas).thereby simplified.Features:- Double foot pedal (start-stop/left-right) included- The new welding table D-BYT-500N includes, in addition to the standard start/Stop foot pedal also an extra remote control (on the cable).- Infinitely adjustable rotation speed of the table- Suitable for any welding process, even high frequency- Very high stability - compact model- Through hole in the turntable plate- ...

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmweight of the machine ca.: 1,6 tThe Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.Grid lines at intervals of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 6x feet basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 913 kg280030.XD7D- Through hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 – 27 mm- Sidewall made of high quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Holes surface in diagonal grid- Rounded corners, edges and holes- Side panel height 200 mm- Holes in the side wall in the diagonal grid- Including scaling on the surface- Structure reinforced with ribs- Grid lines enable precise build-upsIncluding 4x feet basic equipment 650 item no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmweight of the machine ca.: 1,0 tThe table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device.The welding tables are provided with scale as standard.Including 4x feet Basic equipment 650 Article no. 280858.XThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1100 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-48474-100

table length: 1000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 416 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.