mandrinadoras y centros de mecanizado usadas para la venta (3,209)

bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 spindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was created with ModulMWS - the soft ...

bore capacity in steel (diameter): 25 mmthroat: 170 mmbore stroke: 50 mm: 16 mmspindle taper: MK 3 spindle turning speed range: 50 - 3000 U/min: 280 mm: 155 mmtable surface area: 500 x 180 mmconnected load frequency: 230 Vmax. distance between table and spindle-nose: max. 320 mmtotal power requirement: 0,8 kWweight of the machine ca.: 150 Kgdimensions of the machine ca.: 670 x 550 x 910 mDrilling and milling machine with- variable spindle speed- Digital depth display- Left / right switch- Cross support- swiveling spindle head- Feeds via hand crank- Tool case with contentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mmthroat: 400 mmbore stroke: mmtotal power requirement: 4,4 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mmthroat: 180 mmbore stroke: 85 mmspindle taper: MK 2 spindle diameter: 47 mmspindle turning speed range: 320 - 3300 U/min: 230 mm: 100 mmtable surface area: 420 x 155 mmconnected load frequency: 230 V: 900 x 600 x 300 cmtotal power requirement: 0,75 kWweight of the machine ca.: 8o Kgdimensions: 0,7 x 0,7 x 0,8 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1400 mmtotal power requirement: 6 kWweight of the machine ca.: 3.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 115 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 350 mm: 130 mmtable surface area: 590 x 190 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmfeed: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,7 x 0,95 x 1,75 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M12 metrisch: 400 U/min.0: 6 - 8 barworking area: max. 1100 mmweight: 15 kgdimensions: 700 x 280 x 200 mmPneumatic tapping machineType with an adjustable angle, horizontal tapping possiblePneumatic tapping machines for M3 - M12 threads, angle adjustable.8 pcs. quick-change chuck with slipping clutch.Documentation in English!Optional: clamping table with grooves type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número de husillos: 4 Capacidad de orificio en acero (diámetro): 23 mmCarrera del orificio: 150 mmRequisito de potencia total: kW Peso de la máquina aprox.: TDimensiones de la máquina aprox.: M

bore capacity in steel (diameter): 75 mmarm length: 1700 mmworkpiece height max.: 370 - 1700 mmtotal power requirement: 12 kWweight of the machine ca.: 7000 kgdimensions of the machine ca.: mC S E P E L (Hungary)Radial DrillModel RFh 75/2000 Year 1977 Serial No. 61158_______________________________________________________Drilling capacity, Steel / Cast Iron, max. 75 / 90 mmThread cutting Steel / Cast Iron M 60 / 70Distance between column and spindle centre, max. 1,700 mmSpindle taper ( Morse Cone) MK 5Vertical stroke of radial arm 380 mm21 Spindle speeds 19 – 1.900 rpmBase plate 1.100 x 2.300 mmMounting height, min. ...

bore capacity in steel (diameter): 45 mmthroat: 230 mmbore stroke: 125 mmspindle taper: ISO 30 spindle turning speed range: 75 - 1600 U/minmax. milling cutter diameter: 80 mm: 560 mm: 230 mmtable surface area: 800 x 240 mmmax. distance between table and spindle-nose: 460 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 320 Kgdimensions of the machine ca.: 1,0 x 0,8 x 1,45 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 560 mmz-travel: 600 mmControl: HEIDENHAIN iTNC 530 total power requirement: 70 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mD E C K E L M A H O (Germany)Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision workModel DMC 75 V LINEAR Year 2005_______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mmTable clamping size 950 x 650 mmMax. Table load 1.000 kgMax. height of workpiece 60 ...

thread dia.: M3 - M16 mm: max. 187 U/min.working area: 180 - 1000 mmengine output: 0,7 kWweight: 22 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmControl: SIEMENS 840 C total power requirement: 12 kWweight of the machine ca.: 10000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Número de husillos: - Capacidad de orificio en acero (diámetro): - Carrera del orificio en mm: - Requisito de potencia total en mm: - kW Peso de la máquina aprox.: - DimensionesTde la máquina aprox.: - M

thread dia.: M3 - M16 metrisch: 312 U/min.working area: max. 1100 mmengine output: 0,6 kWweight: 30 kgdimensions: 700 x 600 x 200 mmElectric tapping machines for M3 - M16 threads,Angle adjustable.Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 380 mmz-travel: 300 mmControl: FANUC total power requirement: 12 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mmy-travel: 800 mmz-travel: 700 mmControl: HEIDENHAIN iTNC 530 total power requirement: 50 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 160 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 85 - 1800 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 0,85 / 1,5 kWweight of the machine ca.: 500 kg.range L-W-H: 965 x 515 x 1920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carrera X: 630 mmCarrera Y: 550 mmCarrera Z: 500 mmPotencia total requerida: 10 kWPeso de la máquina aprox.: TDimensiones de la máquina aprox.: M

bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min: 500 mm: 230 mmtable surface area: 720 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,1 x 0,9 x 1,2 mdomestic equipments• Digital display• Digital depth gauge for quill• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 155 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 125 - 3030 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 1,2 kWweight of the machine ca.: 540 kg.range L-W-H: 0,8 x 0,55 x 2,2 mm• machine base for clamping high workpieces• Digital Depth Gauge• Gearbox swivels 180 °• silent running through geärtete, ground oil-cooled gears• Tapping Function• electromagnetic clutch for drill feed• automatic feed• electric drive for table height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 feed range - spindle: 0 mm/Uspindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was crea ...

Capacidad de orificio en acero (diámetro): 10 mmgarganta: 0 mmcarrera del orificio: mmrequisito de potencia total: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: m

core drilling diameter max.: 6 mmbore depth: 350 mmswing diameter: mmtotal power requirement: 15 kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: 5000 x 1200 x 2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 110 mmstroke: 150 mmthroat: mmtotal power requirement: 2,5 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 25 mmbore depth: 1000 mmswing diameter: mmtotal power requirement: 25 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: mT B T (Germany)CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mmTable clamping area 1,200 x 2,000 mmDrilling capacity in solid material, approx. 4 - 25 mmTool holder taper HSK 50Spindle speeds 1.260 - 15,000 rpmFeed rates / quickfe ...

x-travel: 500 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: 12 kWweight of the machine ca.: 3800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mmx-travel: 900 mmy-travel: 600 mmz-axis: 200 mmtable length: 1020 mmtable width: 860 mmtaper MK: 40 Table size, approx. 1,020 x 860 mmMax. weight of workpiece 800 kgTable travel, longitudinal, max. (X) 900 mmBoring head travel, cross, max. (Y) 600 mmBoring spindle stroke (Z) 200 mmVertical travel of cross beam (W) 635 mmVertical distance between table and boring spindle 15 - 850 mmDistance between columns 950 mmSpindle Ø 110 mmSpindle taper internal/external ISO 4018 spindle speeds 10 - 2,500 rpmMilling feeds of table, infinitely variable 1 - 6,000 mm/min4 milling feeds of boring head 30 - 180 mm/min6 boring feeds 0.01 - 0.39 rpmAccuracy of all 3 axes when the machine was new 0.003 mmQuick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/minSpindle drive 6.2 kWWeight, approx. 9,000 kgTotal electrical load 15 kW -  ...

x-travel: 800 mmy-travel: 500 mmz-travel: 510 mmtotal power requirement: 60 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 530 mmz-travel: 510 mmControl: MSC 504 Mori SeikiMain spindle:: turning speeds: max. 10.000 min/-1power capacity - main spindel: 15 / 11 kWtool taper: SK 40 spindle bearing diameter: 70 mmdistance spindle /table: 150 - 660 mmwork table:: table surface area: 1.100 x 600 mmmax. table load: 800 kgT-slots: 6x 18 mmtable height over floor: 900 mmturret:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 125 mmmax. tool length: 300 mmmax. tool weight: 8,0 kgchange-time tool to tool: 1,3 secchange-time chip to chip: 4,1 - max. 9,2 secfeeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 20 m/minfeed speeds: max. 6.000 mm/minTipp feed: 1 - 5.000 mm/mintotal power requirement: 27 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 3,5 x 3,0 x 2,8 mDocuments: Chip conveyor: Coolantsystem: high press ...