mandrinadoras y centros de mecanizado usadas para la venta (3,209)

spindle diameter: 135 mmx-travel: 1000 mmy-travel: 700 mmz-travel: 300 mmcross rail adjustment - vertical: 780 mmdistance between table/spindle: 1000 mmtable surface area: 1100 x 842 mmdistance between columns: 1100 mmtable load: 1500 kgtool taper: SK 45 spindle turning speed range: 2400 U/minspindle drive: 5,9 kWfeed range: 1 - 6000 mm/minweight of the machine ca.: 10,6 tdimensions of the machine ca.: mRetrofit / overhauling in May 2005 (with geometric measurement):- New Heidenhain iTNC-530 control- New electronics- New Siemens servomotors- Heidenhain glass scales- Revision of drilling spindle unit(total costs € 118,436.00)Equipment:Infrared measuring probe m&h 38.10-MINIElectron. HandwheelVarious tool holdersTransport dimensions:- Machine (LxWxH) 3500 x 2600 x 2750 mm- Control cabinet (LxWxH) 2300 x 600 x 2300 mm- Hydraulic (LxWxH) 800 x 600 x 1000 mmThe data for this ad was create ...

Características técnicas: - Capacidad de perforación en madera 40 mm - Capacidad de perforación en acero 18 mm - Soporte de husillo de perforación MK 2 - Carrera de la caña 120 mm - Velocidades del husillo de perforación infinitamente variables en pasos - 60 - 2840 rpm - Mesa de distancias máx. – husillo de perforación 600 mm - Pluma / unidad inclinable izquierda + derecha 45 cada una - Pluma / unidad giratoria izquierda + derecha - Tamaño de la mesa: 450 x 450 mm - Accionamiento 400 V / 0,33 / 0,55 kW - Necesidad de espacio aprox. 500 x 1870 x 1200 mm - Peso aprox. 150 kg

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 460 x 460 mmturning speeds: 75 - 3200 U/minengine output: 1,5 kWcolumn diameter: 125 mmthread: M16 ST60feed: 0,10/0,18/0,26 mm/Udimensions: 800 x 500 x 2200 mmweight: 350 kg- automatic drill feeds (magnetic clutch)- Height adjustable and angle adjustable table- Movable work table- Integrated cooling system- Powerful engine- 3 hand levers for drilling feed- Safety shield with limit switch- Separate emergency stop- Built-in working lights- Incl. drill chuck 16mm - B16- Built-in automatic thread cutting.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centro de mecanizado CNC Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Viajar: Eje X 3.500 mm Eje Y 1.000 mm Eje Z 770 mm Área de sujeción 4.150 x 1.000 mm Ranuras en T 5 piezas Distancia Ranuras en T 200 mm Altura de la mesa sobre el suelo: 730 mm Carga de la mesa: aprox. 4.000 kg Montaje: DIN 69871 SK 50 Almacén de herramientas: 50 – compartimento Velocidad del husillo: 20 - 4.500 rpm Accesorios - Automatización de puertas - Operador de mano - Capó de la máquina -Transportador

x-travel: 800 mmy-travel: 400 mmz-travel: 350 mmtotal power requirement: 40 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 275 mmbore stroke: 120 mmspindle taper: MK 4 turning speed range: 75 - 3200 U/min: 190 mm: 490 mmtable surface area: 700 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,8 x 0,75 x 1,85 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro del husillo: 0 mmRecorrido X: 700 mmRecorrido Y: 600 mmLongitud de la mesa: 800 mmRequisito de potencia total: kW Peso de la máquina aprox.: TDimensiones de la máquina aprox.: MDiseño de doble columna Tamaño de la mesa de perforaciónde plantilla: 800 x 600 mm

thread dia.: M6 - M22 mm: 60/200 U/min.: 105 Nmair pressure: 6 - 8 barworking area: 400 - 2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60 mmthroat: 420 mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mDrilling Ø, steel or cast iron 60 mmBoring Ø with pre-bore ½ 100 mmTable Ø 600 mmDistance between spindle and column 420 mmSpindle taper MK512 spindle speeds 120 - 800 rpmQuill stroke 270 mmMounting height above rotary table 800 mmMounting height above base plate 1,400 mm8 drilling feeds 0.13 - 1.8 rpmSpindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 HzWeight approx. 2,600 kgAccessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 3 - 5 mmthroat: 150 mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVarious Special purpose drilling machinesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mP O S A L U X (Switzerland)Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope a ...

core drilling diameter max.: 18 mmbore depth: 320 mmswing diameter: mmtotal power requirement: 33 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 8-125 mmgrinding depth: 130 mmclamping length: 50-1100 mmmax. workpiece diameter: 0 mmmin. workpiece diameter: 0 mmworkpiece length: mmtotal power requirement: 1 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400_______________________________________________________Distance between centres 50 – 1,100 mmHeight of centres 145 mmWorkpiece Ø 8 – 125 mmMax. centre hole taper Ø 2 – 50 mmMax. centre hole taper angle 60 °Clamping range of vice 4 – 150 mmS ...

core drilling diameter max.: 50 mmbore depth: 2000 mmswing diameter: mmdrilling capacity diameter max.: 110 mmtotal power requirement: 30 kWweight of the machine ca.: 10 tDrilling Ø, approx. 2 - 50 mmBoring Ø, approx. 100 mmDrilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mmStroke of drilling slide, approx. 4,000 mmDistance between the two spindle heads 5,000 mmHeight of centres above guideways 350 / 450 mmDrilling feed of drilling slide, infinitely variable 20 - 200 mm/minQuick feed of drilling slide 2,500 mm/minSpindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kWDrive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kWTotal electrical load, approx. 60 kW - 380 V - 50 HzTotal length of machine / guideways 7,500 / 5,000 mmWeight, approx. 10,000 kgAccessories / Special Features Machine consists of the following elements: Main spind ...

cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: m: : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope and machine lamp.The data for this ad was created with ModulMWS - ...

: 0 : 0 Potencia total requerida: kWpeso de la máquina aprox.: tdimensiones de la máquina aprox.: mPerforación de placa de circuito impreso m/c, husillo único, projektor.

spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmtotal power requirement: 4,5 kWweight of the machine ca.: 30 tSpindle Ø 130 mmSpindle taper SK 50Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mmLower table 3,300 x 2.400 mmMax. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mmFeeds 0.9 - 2,000 mm/minQuick feed for headstock and column 5,000 mm/minQuill feed 0.5 - 1,200 mm/minSpeed range, partially infinitely variable 4.5 - 1,250 rpmWeight, approx. 30,000 kg Accessories / Special Features HEIDENHAIN Digital Display for 3 axes. Hardened guideways. Ball screw spindles. Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. Moving operating platform. Hanging control panel.  ...

diámetro del husillo: 105 mmRecorrido X: 1250 mmRecorrido Y: 1000 mmRecorrido Z: 600 mmLongitud de la mesa: 1100 mm Ancho de la mesa: 900 mmAdaptador de herramienta: 50 ISO / MKRequisito de potencia total: kWPeso de la máquina aprox.: tPerforadora de mesa CNC, reacondicionada 2002, BOSCH CC 300

workpiece diameter: 125 mmgrinding depth: 50 mmclamping length: 2000 mmtotal power requirement: 0,5 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding MachineModel ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278_______________________________________________________Distance between centres 50 – 2.000 mmHeight of centres approx. 125 mmWorkpiece Ø in clamping Vice 8 – 125 mmSwing of workpiece over tailstockguide 290 mmSwing of Workpiece max. over grinding head pillar 300 mmMax.weight of workpiece 250 kgMax. centre hole taper Ø 2 – 50  ...

table length: 2000 mmtable width: 1800 mmtable load: 12,5 ttotal power requirement: 10 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mTable size approx. 2,000 x 1,800 mmMax. weight of workpiece, approx. 12,500 kgTable travel, longitudinal 1,250 mmTable height above floor 920 mmLongitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/minLongitudinal quick feed 2,000 mm/minTurning quick feed, with Ø 1,000 mm 3,150 mm/minWeight of machine 7,500 kgExternal dimensions of machine 3,700 x 2,100 x 920 mmTotal electrical load 10 KW - 180 V - 50 HzAccessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle.Condition : Satisfactory to good. Machine can be inspected under power.Delivery : ...

bore capacity in steel (diameter): 15 / 18 mmthroat: 180 mmbore stroke: 80 mmturning speeds: 200 - 4000 U/min: 250 x 220 mmdistance drilling head - clamping area: max. 380 mmtotal power requirement: 1,1 / 400 kW / Voltcolumn diameter: 65 mmtool taper: MK 2 weight of the machine ca.: 0,08 tdimensions: 0,4 x 0,5 x 0,9 mPrecise table drill:- high accuracy and quality- Drill table adjustable via rack and swiveling around the column- Full engine protection- Star grip- 230 volt mains connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 350 mmz-travel: 350 mmtotal power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mmy-travel: 630 mmz-travel: 630 mmtotal power requirement: 30 kWweight of the machine ca.: 12500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 250 mmbore stroke: 130 mmspindle taper MT: 3 MKtable:: 380 x 380 mmcolumn diameter: 98 mmturning speeds: 75 - 3200 U/minfeeds: mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 220 kg.range L-W-H: 0,5 x 0,6 x 2,05 mmGear drillThread cutting deviceLeft/right barrelTilting work table.Lighting.2 electric Speed levels.Depth stop.Gears run in oil.Packaging dimensions:2100x400x710mmWeight 260kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 200 mmbore stroke: 120 mmspindle taper MT: 4 MKtable:: 290 x 270 mmcolumn diameter: 92 mmturning speeds: 150 - 2450 U/minfeeds: 0 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 95 kgrange L-W-H: 0,66 x 0,8 x 1,7 mColumn drilling machine with:ARBO / CE approved protective cover.Quick release chuck with pin.Tiltable work table.Deep stop.Ejector wedge.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel: 40 mmthreading cutting capacity:: M30 throat: 310 mmbore stroke: 175 mmspindle taper: MK 4 feed range - spindle: 20 - 400 mm/Uspindle turning speed range: 60 - 1250 / 120 -2500 U/mintransmission ratio: 2 Stufencolumn diameter: 120 mmtable surface area: 550 x 400 mmtotal power requirement: 1,5 / 3,0 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 0,7 x 1,4 x 2,0 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad w ...

thread dia.: M5 - M16 mm: 250 U/min.: 48 Nmair pressure: 6 - 8 barworking area: 150 - 1900 mmThe pneumatically driven D-JSC tapping machine has, among other things, oneAir motor with quick chuck and a stable and flexibleLabor arm.The mounting arm can be attached directly to the work table using the mounting flangeand is ready to work immediately. This means fast changeover timesguaranteed.It is possible to simply tap the tap to the desired holeto be attached without having to position the component under the tap.Version with an adjustable angle, whereby the quick chuckcan tilt so that horizontal tapping is also possible.Pneumatic tapping machines for M5 - M16 threads, angle adjustable.6 pcs. Quick change chucks with slip clutch.Optional:- Clamping table with T-slots: 750x600x650mm or 990x700x800mm.- magnetic base.The data for this ad was created with ModulMWS - the software solution of L ...

Motor output: - kWDimensions (L/W/H): - mmVertikal stroke: - mmTable dimensions: - mmDust suction hood: - mmDiameter of the saw arbor: - mmLength of the rolling table: - mmSawblade tiltable: - °milling stroke vertical: - mmtotal power requirement: - kwWeight: - kgSpindle diameter: - mmLength of the planing table: - mmNumber of heads vertical: St.Number of heads horizontal: St.Number of milling agregates: St.Number of knives: St.Number of sanding units: st.Number of spindles: St.Number of spindle head vertical: St.Number of spindles head horizontal: St.Number of milling spindles: St.0: St.Number of tools: St.Working width: mmYear: 0Speed of boring spindles: U/min.Required air-pressure: barDowel insertingunits: St.Electrical height adjustment: 0Working height: mmWorkpiece length min.: mmAir consumption: m³/hPositions adjustment of boring unit: mmPositions adjustment  ...

bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 520 mm: 230 mmtable surface area: 730 x 210 mmconnected load frequency: 400 Vtotal power requirement: 1,1/1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,1 x 0,9 x 1,15 mdomestic equipments• Digital depth gauge• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm: 375 U/min.working area: 180 - 1000 mmengine output: 0,7 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.