máquinas de soldar usadas para la venta (1,765)

: neu : ca. 2 - 4 Wochen ab Auftr : 1490 €: 1500 x 1000 mm: 850 mm: 344 kg: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet with levelling option- Different foot variants available (standard, height-adjustable and with castors)- Load capacity 50 ...

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 16980 €: 326.02 €: 1 : 66 mm: 60 °: 300-800 U/min: 0 - 1,2 mm/min: 6 mm: 6.5 kW: 1179 mm: 853 mm: 1524 mm: 320 kgportable auto-feed bevelling machinereal time measurement and on-screen displaydouble-sided bevellingvariable spindle speedmilling head including 8 replaceable insertsremote control panel with LCD display max. bevel width: 66 mm at 15°52 mm at 30°50 mm at 45°51 mm at 60°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...

: neu : 2025 : 020157 : prompt, Zwischenverkauf v : Türkei : 6320 €: 121.98 €: 1 : 250 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operat ...

: neu : ca. 2 - 4 Wochen ab Auftr : 3420 €: 2000 x 1000 mm: 850 mm: 8000 kg: 712 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (standard, height-a ...

Sistema de soldadura robótica de doble estación de trabajo, construido en 2007, compuesto por robot KUKA, máquina de soldar INE, controlador KUKA KR C2, estructura de soporte de acero para suspensión robótica, posicionadores motorizados, armario de control y componentes de servicio. El sistema lleva la marca CE de fábrica y está completo con manuales y documentación técnica disponibles. El robot funciona, actualmente está apagado desde hace unos meses por falta de uso. Se recomienda la verificación/revisión por parte de personal técnico cualificado antes de volver a poner en servicio. Sistema grande, adecuado para carpintería metálica y soldadura automatizada en doble estación de trabajo. Auction-ID: A7-47032-1

Auction-ID: A1-41997-72

Auction-ID: A1-41997-100

Auction-ID: A1-41997-74

Auction-ID: A1-41997-99

Auction-ID: A1-41997-75

Auction-ID: A1-41997-73

Auction-ID: A1-41997-101

: neu : ca. 4 Wochen ab Auftragse : Polen : 1760 €: 1 : 1 : 18 mm: 60 °: 2-5 mm: 1800-5850 U/min: 40 mm: 2.2 kW: 585 mm: 156 mm: 238 mm: 10 kgportable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plasticbevel angle and bevel radius depends on accessoriescontinuous bevel width adjustmentoverload protectionelectronic speed controlBASIC SET:BM-18 bevelling machine without accessoriesplastic case32mm open end spannerallen wrench hex s = 6Grease for fixing screws(5 g, 0.17 oz)user manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-46386-26

Auction-ID: A7-46691-77

Auction-ID: A3-43535-11363

: neu : ca. 2 - 4 Wochen ab Auftr : 2697 €: 2000 x 1000 mm: 3000 kg: 348 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2000 x 1000 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

Auction-ID: A7-46691-78

Auction-ID: A1-46386-19

Auction-ID: A1-46386-15

Auction-ID: A1-46386-27

Auction-ID: A7-46691-76

Auction-ID: A3-43535-578

Auction-ID: A3-43535-11362

Auction-ID: A7-45993-182

Auction-ID: A7-45993-174

Auction-ID: A7-45993-185

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 26880 €: 513.41 €: 1 : 1 : 30 mm: 60 °: 500-2920 U/min: 50 - 150 m/min: 3 mm/min: 100 mm: 7.5 kW: 1216 mm: 1275 mm: 850 kgcontinuous adjustment of spindle speed and feed rate make it suitable for different types of steel and aluminumhigh speed rotary milling head equipped with 10 insertscutting inserts for various materials3D contact wheel control for proper workpiece alignmentergonomic ball roller benchswarf drawerBASIC SET:SBM-500 stationary bevelling machineset of toolsuser manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-45993-186