fresadoras usadas para la venta (2,510)

Auction-ID: A1-41281-46

Auction-ID: A1-50707-323

max. wheel diameter: 800 mmmax. module: 20 Control: SINUMERIK 840 D table rotation speed: 50 U/mintable load: 95 kNSize of table plate: 700 mmtable bore diameter: 250 mmAxial travel: 1000 mmpivoting angle: +/- 35 Grad: 450 U/mintangential travel max.: 320 mmtool diameter: 315 mmtotal power requirement: 50,00 kWweight of the machine ca.: 16,00 tdimensions of the machine ca.: 6,30 x 5,00 x H3,80 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mmgear width: 660 mmmax. module: 16/18 min. module: number of milling spindle turning speeds: 18 number of feeds: 18 total power requirement: 12 kWweight of the machine ca.: 20 tdimensions of the machine ca.: mThe machines electrical system was renewed.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mmy-travel: 600 mmz-travel: 600 mmcontrol: Sinumerik 840D SIEMENStable-size: 1.420 x 600 mmtable load: 2,0 tspindle taper ISO: 50 spindle turning speed range: 4.000 U/minfeed: 2.000 mm/minrapid traverse: 10,0 m/minvoltage: 400 Vtotal power requirement: 42 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: 3,60 x 2,45 x 2,15 mcoolant tank: 1,25 x 1,25 x 0,50 m- Serial-No.: 076- Control system: SIEMENS Sinumerik 840D- Electric handwheel- Hydraulic tool clamping with foot switch- SEMPUCO universal milling head- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 430 mmz-travel: 400 mmControl: HEIDENHAIN, TNC 114 B table surface area: 800 x 390 mmspindle taper: SK 40 spindle turning speed range: 50 - 2500 U/minspindle drive: 3 kWmax. torque on the spindle: 5 Nmfeeds X-axis: 4 - 1600 mm/minfeeds Y-axis: 4 - 1600 mm/minfeeds Z-axis: 4 - 1000 mm/minrapid traverse X/Y/Z axis: 1,6 / 1,6 / 1,0 m/minpower feed x/y/z: 5000 Ntable load capacity: max. 250 kgtotal power requirement: 6 kWweight of the machine ca.: 1,6 tdimensions of machine L x W x H: 2,30 x 2,30 x 2,40 mAccessories: vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 3000 mmy-axis: 2000 mmz-axis: 1100 mmdistance between columns: 3800 mmspindle motor: 18 / 23 kWspindle turning speed range: 18000 U/minrapid traverse: - m/mintable-size: 2800 x 2000 mmworkpiece weight: 7,5 t/m²Control: Heidenain TNC 640 workpiece width - max.: 3650 mmA-Axis: +/- 115 / 0,001 °c-axis: 360 / 0,001 °total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mMachine equipped with:- 5-axis machining centre- Heidenhain 640 iTNC CNC control (15.1” LCD) with Kinematics Opt. function- 24-position tool changer (HSK A63)- (German) Cytec S8 A/C milling head (18,000 rpm, 56/72 Nm, integrated)- Linear guides with rollers for the X/YU/Z axes- Heidenhain linear scales for the X/YU/Z axes- Coolant supply through the spindle, 20 bar- Air blow-off device on the spindle- Blum TC-60 workpiece measuring system- Blum NT-A3 tool measuring system- Sp ...

Instrumento digital de medición de altura Mitutoyo LH-600 con unidad de control/visualización QM-Data 100. Rango de medición de 600 mm, encendido y visible en las fotos. Adecuado para control de calidad e inspección en taller. Auction-ID: A1-51153-58

travel -x axis: 800 mmtravel -y axis: 500 mmtravel -z axis: 610 mmcontrol: HEIDENHAIN - TNC 530 table load: 600 kgnumber of spindle speeds: 14.000 U/minnumbers of positions in the tool changer: 46 tool taper: HSK-A63 Milling Machine - Vertical | FEHLMANN - PICOMAX 95 equipped with 46-way tool changer and chip conveyor.Equipment / Scope of Delivery:- touch probe: HEXAGON- tool measurement system: Blum- oil mist separator: Donaldson- high-pressure coolant system with coolant pump: Fehlmann- burn Engineering FD 2500-F11 cooling unit- Knoll 300 K-1 scraper belt conveyorThe machine is in a well-maintained condition.Please refer to the offer for further technical details.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: PICOMAX95 | PICOMAX-95The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmControl: Dialog 11 total power requirement: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3 x 4 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MÁQUINA DE FRESADO MECÁNICA HERMLE FWH 630 USADANº de serie: 3221Dimensiones de la mesa: 650 x 180 mmCarreras: X=450 - Y=120 - Z=340 mmVelocidad del husillo: 100 a 4480rpm Equipada con1 cabeza cono basculante SA30Movimiento longitudinal manual yautomático Dimensiones y pesoPalet Europe 1200x1200xH1800mm - peso 600 kg Auction-ID: A1-50950-25

x-travel: 6.500 mmy-travel: 1.500 mmz-travel: 2.000 mmSize of table plate: 10.000 x 1.100 mmtable weight: 2,5 Kg /m² Kgfeeds: 25.000 mm/minmilling head: 2,5 tool taper: ISO 50 DIN 69871 number of spindle speeds: 20 - 4.000 U/min/rpmtransmission ratio: 2 spindle drive: 30 kWTools changer: 60 fach/toolsInternal cooling system: 20 barchip conveyor: Inkl. kWhandwheel: Heidenhain HR-410 total power requirement: 63 kVAweight of the machine ca.: 34,5 tdimensions of the machine ca.: 11.275 x 4.840 x 4.13 mmMaximum tool diameter with adjacent tool positions occupied: 125 mmMaximum tool diameter with adjacent tool positions free: 250 mmMaximum tool length: 400 mmMaximum tool weight: 20 kgAdditional tank with paper filterOperator platformMotor drives: SIEMENS DIGITALThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 830 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from atraining workshop.Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123- Manual mode: Manual operation and positioning with manual input- Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing ManualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 950 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine comes from a training center.Equipment:3-axis active digital readout made by HeidenhainInfinitely variable feeds and rapid traverse in all 3 axesFixed angle tableCoolant equipmentTailstock with counter bearingSeveral toolholdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5100 mmy-travel: 3500 mmz-travel: 1100 mmdistance between columns: 2700 mmdistance table - lower edge spindle: 200 - 1300 mmtable-size: 5000 x 2600 mmtable load: 17 tspindle motor: 37 /45 kWspindle turning speed range: 6000 U/mintool taper: BT 50 feed in x - axis: 12 mm/minfeed in y - axis: 20 mm/minfeed range Z-direction: 15 mm/minw-axis: mmcontrol: Fanuc 0i-MF total power requirement: - kVAweight of the machine ca.: - tdimensions of the machine ca.: 13 x 8 x 5,5 mPortal milling machine equipped with:- CNC Control FANUC 0i-MF (10.4 LCD)- ATC 60-fold (BT 50)- X/Y axis roller linear guide way, Z axis box way- Auto head storage:-- 90 degree angle milling head- Coolant thru spindle 50bar- X/Y/Z axis linear scales- Spindle oil cooler- Oil skimmer- Air conditioner - Chip conveyor- Ball Screw Cooling X/Y/Z- Air Blast through SpindleThe data for this ad was created with ModulMWS - th ...

x-travel: mmy-travel: mmz-travel: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 100 mmy-travel: 200 mmz-travel: 450 mmtaper ISO: SK 40 turning speeds: 22 - 1400 U/mintotal power requirement: 7,5 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 1,8 x 2 x 1.85 m3-axis digital readout- Rapid traverse- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 35 / 25 kWtool taper: SK 40 work table:: table surface area: 2.900 x 700 mmmax. table load: 2.150 kgtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 40 m/minfeed speeds: max. 40.000 mm/minfeed power: max. 8 kNtotal power requirement: 54 kVAweight of the machine ca.: 14,4 tdimensions of the machine ca.: 8,0 x 5,6 x 2,8 mChip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setting: Blum - LaserCo ...

x-travel: 620 mmy-travel: 420 mmz-travel: 400 mmturning speeds: 50- 4000 U/mintotal power requirement: 17,5 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 2,0 x 2,7 x 2 mDescription:- excellent condition- Heidenhain ND780 digital readout- infinitely variable speed control- infinitely variable feed drives- hydraulic tool clamping- mechanical handwheels- electronic handwheel- drilling quill- horizontal milling spindle- coolant systemX-travel 620 mmY-travel 420 mmZ-travel 400 mmSpindle taper ISO 40 DIN 69871ASpindle speeds 50 - 4000 rpmTable size 800 x 400 mmTable load 400 kgFeed rates infinitely variable, max. 2000 mm/minRapid traverse 5 / 4 m/minDrive power - milling spindle (S1) 10.5 kWQuill stroke 80 mmCoolant systemOperating voltage 400 VTotal power requirement 17.5 kWMachine weight approx. 1.9 tSpace requirement approx. 2.00 x 2.76 x 2.05 mThe data for this ad was cr ...

x-travel: 4500 mmy-travel: 1700 mmz-travel: 1000 mmTABLE: - table surface (left-right): 6100 mm- table surface (front-back): 1000 mm- workpiece load (max): 8000 kgWORKING SPINDLE / HEAD: - spindle type: Schwenkkopf - tilting range: 1 / 3 °- spindle revolutions (min): 15 U/min- spindle revolutions (max): 3000 U/min- tool fixture: ISO SK 50 - drive power (max): 30 kWAXIS DRIVES: - feed velocity (min): - mm/min- feed velocity (max): 20000 mm/minControl: NUM 750 total power requirement: - kWweight of the machine ca.: 28 tequipped with:- CNC Control NUM 750- Universal indexing head 1°x 3°- ATC 61-fold- CE SignThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 760 mmy-travel: 381 mmz-travel: 450 mmquill stroke: 152 mmtable-size: 1300 x 305 mmcontrol: Heidenhain TNC 360tool adaptor: SK40 turning speed range: 100- 4.000 U/minrapid speed: 5000 / 7000 m/minfeed speeds: 2,5 bis 3000 mm/minpower requirement: 2.2 kWdiameter of quill: 101 mmtotal power requirement: 15,0 kWweight of the machine ca.: 2,4 tdimensions: 2,4 x 2,3 x 2,2 mEquipment:- Heidenhain TNC 360- Coolant system- Hydraulic tool clamping- Milling head with quill- Machine light- Chip tray- DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 700 x 460 mmspindle taper: SK 40 spindle turning speed range: 31,5 -5000 U/minspindle drive: 5,5 kWquill stroke: 80 mmvertical head swivelling: +/- 90 °control: DIALOG 11 feeds x/y/z -stepless: 3000 mm/minrapid traverse: 6 m/mintotal power requirement: 13,8 kVAweight of the machine ca.: 2 tdimensions of machine L x W x H: 2,73 x 2,0 x 2,0 mAccessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 41800 €: 798.38 €: 65 - 2600 U/min: ISO 40 : 420 x 220 x 380 mm: 840 x 390 mm: 2.2 kW: 1600 mm: 1700 mm: 2000 mm: 1145 kg: 840 x 390 mm: 1000 mm/min: 5 : 14 x 63 mm: 200 kg: 420 mm: 220 mm: 380 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 65 - 2600 : 90 - 310 mm: 65 - 2600 : +/- 90° °: 100 mm: manuell : 2,2 kW: 950 x 250 mm: 90 - 310 mm: 100 - 480 mmswiveling operating panel3 axes digital read out Fagor 40i Innovamotor for horizontal- and vertical spindle: 2,2 kWfeed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomat ...

x-travel: 600 mmy-travel: 400 mmz-travel: 320 mmtable-size: 900 x 420 mmcontrol: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/minquill stroke: ja mmtotal power requirement: 5,0 kWweight of the machine ca.: 1,45 tdimensions: 1,6 x 1,2 x 1,9 mFeatures:- Digital display- Coolant system- Milling head with quillThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 720 x 410 mmspindle turning speed range: 40 - 2000 U/min: mm/minfeeds Z-axis: mm/mintool taper: SK 40 total power requirement: 3,0 kWweight of the machine ca.: 1,4 tdimensions: 1,8 x 1,6 x 1,9 mMilling machine with- Toolmakers table- Heidenhain digital readout- Rapid traverse- Coolant system- Central lubrication- Machine feet- incl. drawer unit with contentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mmy-travel: 500 mmz-travel: 500 mmControl: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mmy-travel: 2500 mmz-travel: 1000 mmControl: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mmdistance between columns: 2300 mmrapid travel x/y/z: 15/12.000 mm/minfeeds: 5.000 mm/mintool taper: ISO 50 number of spindle speeds: 5000 U/min/rpmSpindle power: 30 kWtable weight: 10 thandwheel: HR- 410 weight of the machine ca.: 31 tdimensions of the machine ca.: 11 x 3,44 x 4,9 m- CNC control Heidenhain iTNC 530- Tool changer 30-fold (ISO 50)- Milling head CH -45- Coolant through spindle- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 1250 mmz-travel: 1108 mmturning speeds: 60 - 4000 U/minspindle motor: 38 / 24 kWtool taper: SK 50 tool change unit: 40 Pos.table surface area: 1600 x 1250 mmtable load: 7 tc-axis: +/- 120 °B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: 5,5 x 4 x 2,9 m5-axis machining center with- CNC control Heidenhain iTNC 530- NC rotary table with B-axis- Automatic swivel milling head (C-Axis)- 40-fold tool changer (SK 50)- Electronic handwheel- 2 Chip conveyor- Coolant device 30 l/min- Coolant through CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mmx-travel: 450 mmy-travel: 250 mmz-travel: 500 mmdigital: ja Dimensions (L/W/H): 1,2 / 1,1 / 1,95. mmthread dia.: 24 mmweight of the machine ca.: 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 300 mmz-travel: 420 mmdigital readout: 3 Achsen HEIDENHAINtable-size: 1100 x 250 mmspindle turning speed range: 40 - 1180 U/minspindle taper ISO: 40 feeds: 18 - 384 mm/minmilling motor: 3,7 kWcoolant: voltage: 400 Vtotal power requirement: 5,5 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 1,45 x 1,70 x 1,90 m- Serial-No.: 6760- 3-axis digital readout HEIDENHAIN- rapid traverse- central lubrication- coolant device- machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.