Curvadoras motorizadas en redondo para chapa (61)

: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm: 6 mm: 6 mm: 4 mm: 5 mm: 4 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement of  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 28 mm: 28 mm: 22 mm: 26 mm: 23 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

sheet width: 2070 mmplate thickness: 25 mmpre-bending: 18 diameter of upper rolls: 320 mmside roll diameter: 260 mmdiameter of lower rolls: 320 mm: 26 kW: 8100 kg: 4700 x 2000 x 2200 mmFeatures:- Hydraulic side roller adjustment- Conical bending device- 2 driven rollers- Hardened rollers- Hydraulic folding bearing- Mobile control panel- Foot switch- Safety device- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2600 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 220 mmside roll diameter: ~ 170 mmdiameter of lower rolls: ~ 190 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: ca. 5000 kgDimensions (only the machine): ca. 3500 x 1550 x 1400 mm very good condition () current new price incl. accessories approx. 120.000 Euro special price on requestEquipment:- robust electro-hydraulic 4-roll round bending machine- 4-roll concept offers a wide range of bending and rounding options- Swivel-mounted control unit Operation - control of all rollers or machine axes Digital position display of the side rollers Manual operation via JOY sticks- Two central rollers are driven directly via hydraulic motors- Conical rolling possible by tilting the rollers- Parallelism of the side rollers via torsion shafts- Bending on both side ...

sheet width: 2050 mmplate thickness: 10.0 mm STpre-bending: 8.0 mm STdiameter of upper rolls: ~ 205 mmside roll diameter: ~ 195 mmControl: konv. oil volume: 80.0 Litervoltage: 380 Vtotal power requirement: 5.5 kWweight: 3200 kgrange L-W-H: 4500 x 1500 x 1300 mmFeatures:- Robust electro-hydraulic 3-roll bending machine- 3-roll concept offers a wide range of bending and rounding options- Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks- Diameters of up to 1.1 times the top roll diameter are possible- Forged and hardened rolls with a hardness of 53-55 HRC- Low-maintenance, stable machine design- Sturdy welded steel construction- Electro-hydraulic folding bearing for easy pipe removal- Pressure gauge / pressure indicator for the rolls- Safety device (safety lanyard with switch unit)- Operating instruc ...

sheet width: 3050 mmplate thickness: 3.0 mm STpre-bending capacity: 3.0 mm STupper roll diameter: 170 mmlower roll diameter: 170 mmside roll diameter: 180 mmControl: konv. 0: 380 Vtotal power requirement: 3.0 KWweight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metalsEquipment:- Electro-hydraulic 3-roll bending machine- Asymmetrical roll arrangement- Electro-motor-driven side roll adjustment Including digital position display- Manual bottom roll adjustment Via hand crank- Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position- Hardened rolls SAE 1050 CK 45- Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forklift/crane)- Safety device- Connection cable + connector- 4-way foot switch 2 buttons for side roll movement ( ...

sheet width: 1070 mmplate thickness: 4.0 mmpre-bending: 3.0 mmroll length: 1070 mmroll diam. toproll: 110 mmbending speed: 3.0 m/minengine output: 2.2 kWweight: 848 kgrange L-W-H: 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW ()Equipment:- robust electro-mechanical round bending machine- 2x central rollers driven by electric motor (top & bottom roller)- right/left running of the rollers- top roller can be manually swiveled out, with folding bearing- manual delivery of the side roller- including conical bending device- asymmetrical roller arrangement- rollers with profile inlets- safety device (safety line with switch unit)- 1x freely movable control panel- operating instructions (ENG)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 1.5 mmroll length: 1270 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 400 kgrange L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mmplate thickness: 2.0 mmroll length: 1070 mmroll diam. toproll: 75.0 mmengine output: 1.5 kWweight: 325 kgrange L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on requestEquipment:- electro-motor-driven 3-roller round bending machine- asymmetrical roller arrangement- 2x driven rollers using a brake motor- manual folding bearing for quick removal of the workpiece- wire insertion grooves on the bottom and rear rollers- double foot switch for R/L running including emergency stop button- rear roller feed with ratchet lever- electrical safety deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ancho de la hoja: 2100 mmespesor de la placa: 2,0 mmdistancia entre columnas: 2150 mmdiámetro del rollo: 90 mmrequisito de potencia total: 1,5 KWpeso de la máquina aprox.: 0,7 tdimensiones de la máquina aprox.: 2,5 x 0,7 x 1,3 mmDobladora de chapa 3 rodillos- 2 rodillos accionados- Interruptor de pie- Dispositivo de parada de emergenciaLos datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

ancho de la chapa: 2000 mmespesor de la placa: 8 mmpredoblado: potencia total requerida: 7,5 kWpeso de la máquina aprox.: 3,6 tdimensiones de la máquina aprox.: 3600x1250x1350 m