129 DOOSAN maquina usada para la venta

weight max. in kg: 1500 kg serial number: FGA04-1290-00480 drive: Treibgas weight: 2800 kg length in width: 940 mm : ca. 2.060 mm (je nach Mas engine output: ca. 34 kW kW cubic capacity: 1.975 cm³ ccm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torno CNC Tipo: LYNX 220 C Fabricante: Doosan Año: 2008 Control: Fanuc Horario: 17100 Revisión del husillo en 2025 Diámetro máximo de giro: 320 mm Longitud máxima de giro: 305 mm Diámetro de giro sobre la cama: 510 mm Diámetro de giro sobre la corredera: 290 mm X: 175 mm Z: 330 mm Velocidad del husillo: 4000 rpm Paso del husillo: 76 mm Capacidad del manubrio: 65 mm Torreta: 12 posiciones Máquina en buen estado, totalmente funcional, bajo alimentación Encuentra más aquí - / Contacta con nosotros en -

control: FANUC 21i TB Diámetro de giro: 355 mm Longitud de giro: 1330 mmc-eje: indexación: 0,001 velocidades de giro: -2800 U/mintool conicación: BMT 65 Elevador de herramientas de la torreta superior:: 12 Eje X de giro rápido 16 m/min-eje Z: 24 m/min Tamaño total: 4000 x 2000 x 2100 mm Peso de la máquina aprox: 6700 t Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...

control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horas en la imagen Encuentra más aquí - / Contacta con nosotros en -

x-travel: 2100 mm y-travel: 1500 mm z-travel: 1500 mm Number of pallets: 2 size of pallet: 1250 x 1250 mm dimension of workpiece: 2000 x 1725 (H) mm feeds: 0,1 - 12000 mm/min rapid traverse: 24000 mm/min spindle motor: 26/22 kW spindle turning speed range: 10 - 6000 U/min Tool magazine positions: 60 fach tool taper: BT 50 control: Fanuc 31i-MB workpiece weight: 3000 kg total power requirement: 69 KVA total wight: 29 t dimensions of the machine ca.: 10,5 x 5,8 x 4,1 m - CNC control FANUC 31i-MB 4-Axis (X,Y,Z,B) - 2 pallets 1250mm - chip conveyor - High pressure through spindle coolant (Hydtec) - ATC 60 tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 650 mm z-travel: 550 mm Control: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mm Main spindle:: turning speed range - main spindle: 10 - 20000 min/-1 power capacity - main spindel: 22 / 11 kW max. Torque: Nm tool taper: BT 40 work table:: table surface area: 1200 x 650 mm max. table load: 800 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1500 mm/min total power requirement: 48,55 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,65 x 3,30 m CNC Machining Center Vertical - CNC control Fanuc 31i-MB - ATC 30-fold (BT 40) - Chip Conveyor - Tool Measure - Mold Optio n - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

travel -x axis: 1.050 mm travel -y axis: 570 mm travel -z axis: 510 mm control: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/min tool taper: BT 40 table dimension (L x W): 1300 x 570 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: FANUC 31i-B spindle turning speed - stepless: 15000 U/min spindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kW pallet table size: 500 x 500 mm workpiece weight: 500 kg distance spindle center to table: 80 - 810 mm Rapid Travel X / Y / Z-Achse: 60 m/min dimension of workpiece: 800 x 1000 mm total power requirement: 80 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,45 x 2,68 x 2,88 m Horizontal CNC machining centre - CNC control FANUC 31i-B - Tool changer 60-fold (BT 40 Big Plus) - 2 pallet changer(pallet 24-M16) - Table / Pallet indexing Full B axis. - Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m. - Coolant/Filtering Unit - Chip Conveyor - Exhauster The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doosan Puma GT 2100 2021 Torno CNC Tipo: Puma GT 2100 Productor: Doosan Año: 9/2021 Horas: 1008 Totalmente funcional, bajo energía. Más información aquí - / Póngase en contacto con nosotros en -

Buscamos todos los modelos de excavadoras con ruedas Doosan, Daewoo, Hyundai y Hitachi para exportación

Este robot colaborativo DOOSAN M1013 de 6 ejes fue fabricado en 2021. Cuenta con una capacidad de carga útil de 10 kg y un alcance de 1.300 mm, lo que lo hace adecuado para diversas aplicaciones. La máquina incluye una construcción estable con una placa de aluminio y una mesa giratoria para mejorar la funcionalidad. Si buscas capacidades de automatización de alta calidad, considera el robot colaborativo DOOSAN M1013 que tenemos a la venta. Contáctanos para más detalles.

Esta máquina de torneado horizontal DOOSAN Puma 2500XLY de 3 ejes fue fabricada en 2008. Ofrece un rendimiento robusto para operaciones de giro de precisión. Si buscas capacidades de torneado de alta calidad, considera la máquina DOOSAN Puma 2500XLY que tenemos a la venta. Contacta con nosotros para más información.

5460 kg, Power (KVA): 745, Working hours: 122

Este NHP6300 DOOSAN de 4 ejes fue fabricado en 2014. Cuenta con un impresionante recorrido en el eje X de 1.050 mm, recorrido en el eje Y de 900 mm y recorrido en el eje Z de 1.000 mm. La máquina incluye una carga máxima de palets de 1.500 kg y una capacidad de herramientas de 40 herramientas. Si buscas obtener capacidades de mecanizado de alta calidad, considera el DOOSAN NHP6300 centro de mecanizado horizontal que tenemos a la venta. Contáctanos para más detalles.

5560 kg, Potencia (KVA): 745, Horario de trabajo: 88

Engine Brand: DOOSAN, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/doosan-gv158ti-used/731, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

Engine Brand: DAEWOO, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 811 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 40 Kw, Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 50 , Generator Hz: 60 , Generator Volts: 240 , Generator Amps: 120.2 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/daewoo-daewoo-po34ti-generator -50-kva-used/22423, , = More information =, , Empty weight: 2.000 kg, Width: 42 cm, Type number: DAEWOO PO34TI GENERATOR 50 KVA

DOOSAN VCF 850 LSR II es un centro de mecanizado vertical polivalente adecuado para una amplia gama de aplicaciones. Horario laboral de 1993 (como nuevo)

This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details.

DOOSAN MX2100ST turning center, year 2022, equipped with FANUC 31i-B5 control. This multi-tasking lathe offers X1/Z1 travels of 565/1,050 mm, Y-axis ±85 mm, and B-axis indexing. Main and counter spindle each deliver 22/18.5 kW at 5,000 rpm with A2-6 nose and 8 chuck; 76 mm spindle bore accommodates bar stock up to ø65 mm. BMT55P turret with 12 driven tool positions (5,000 rpm) plus 80-station Capto C6 ATC with 12,000 rpm milling spindle (18.5/15/11 kW) and 2.0 s tool change. Single Swiss owner; delivered complete with LNS Sprint 565 S2 bar feeder (3.2 m, ø3â€34 mm), 55-bar high-pressure coolant to milling spindle, electric tool-measuring arm, parts catcher, oil-mist extraction and HAINBUCH TOPlus/Mando workholding.

CONTROLS   CNC controls FANUC 31I MODEL A BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1 WORKING RANGE TURNING   turning diameter (max): 230 mm   bar diameter (max): 65 mm   worpiece length max.: 700 mm MAIN SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 5000 /min   spindle bore diameter: 65 mm   c-axis: yes COUNTER SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 6000 /min   c-axis: yes X/Z SLIDE   tool fixture: Turret ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2800 mm   space requirements -front/back-: 1630 mm   total height: 2200 mm   total weight approx.: 9000 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coola ...

La máquina está en buen estado técnico; las pruebas son posibles mediante acuerdo previo. Sistema de control Fanuc 0i-TD, duración de funcionamento: 5.876 horas.

La máquina está en buen estado técnico y disponible para pruebas mediante arreglo previo. Cuenta con un sistema de control FANUC i, construcción de hierro fundido, guías lineales, recorridos en los ejes X/Y/Z de 1270/670/625 mm, una mesa de 1300 x 670 mm con ranuras en T, una capacidad de carga de mesa de 1000 kg y un cambiador de herramientas de 30 posiciones. Los accesorios extensos incluían: 4º eje (mesa rotatoria), tornillo hidráulico, sondas para herramientas y piezas RENISHAW, deskimmer de aceite, luz de señal de 3 colores, transportadora de astillas tipo cinta, colector de niebla Filtermist 6002, portaherramientas, etc.

La máquina está en buen estado técnico; puede ser probada mediante acuerdo previo.