tornos usadas para la venta (2,969)

Altura central: aprox. 230 mm, ancho central: aprox. 1000 mm, diámetro orbital sobre la cama: aprox. 480 mm, diámetro orbital sobre el soporte: aprox. 200 mm, diámetro del husillo: aprox. 45 mm, rango de velocidad del husillo: 2000 rpm, potencia de accionamiento: 4kW, dimensiones de la máquina X/Y/Z: aprox. 2400 mm/1000 mm/1500 mm, peso: aprox. 1700 kg. Es posible la inspección in situ.

Diámetro de giro sobre la cama / corredera de la cama: 480 mm / 340 mm, longitud de giro: 800 mm, distancia entre ejes: 1000 mm, diámetro de giro en el hueco: 540 mm, diámetro del husillo: 52 mm, velocidad: 1400 rpm. Cono de la caña: MK4, ajuste manual de la pluma: 160 mm, desplazamiento de la parte superior: 10 mm. Dimensiones de la máquina X/Y/Z: aprox. 2600 mm/1100 mm/1350 mm, peso: aprox. 2300 kg. Es posible la inspección in situ.

Está disponible un torno vertical REM controlado por CNC. Diámetro de trabajo: 2500 mm-7000 mm, altura de trabajo: 1000 mm, control: Siemens 840D. Incluidas las herramientas motorizadas. Es posible la inspección in situ.

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

Está disponible un torno vertical CNC de EMAG. Diámetro del mandril: 250 mm, diámetro orbital: 260 mm, recorrido X / Z: 570 mm / 200 mm, desplazamiento rápido X / Z: 60 m / 30 m / min, fuerza de alimentación X / Z: 5 kN, diámetro del husillo de bolas X / Z: 40 mm, diámetro delantero del cojinete del husillo: 110 mm, velocidad: 4500 rpm, potencia: 18/28 kW, diámetro del vástago: 40 mm, potencia de las herramientas accionadas: 12 kW, velocidad: 6000 rpm. Dimensiones de la máquina X/Y/Z: aprox. 2700 mm/2100 mm/2400 mm, peso: aprox. 7000 kg, tiempo de encendido: 50416 h, tiempo automático: 9016 h. Documentación disponible. Es posible la inspección in situ.

Diámetro de giro sobre la bancada/corredera frontal: 570 mm / 420 mm, diámetro de giro: 420 mm, longitud de giro: 635 mm, trayectoria transversal X / Z: 220 mm / 635 mm, velocidad: 5000 rpm, diámetro del husillo: 79 mm, diámetro máximo de la barra: 65 mm. Posiciones de la herramienta: 12, herramientas accionadas: 6, portaherramientas: VDI 30, desplazamiento rápido X/Z: 24m/30m/min. Dimensiones de la máquina X/Y/Z: aprox. 3500 mm/2500 mm/2000 mm, peso: aprox. 4500 kg. Es posible la inspección in situ.

Eje X: 607 mm, eje Z: 286 mm, velocidad del husillo: máx. 6000/min, control: Fanuc 32i A, longitud: 4600 mm, ancho: 1600 mm, altura: 2700 mm, peso: 2,1 t, horas de funcionamiento: 34.536 h. Con automatización FMB Unirobot LR MATE 200iD7L-P2TB, husillo de rectificado Jäger HF-Spindle, mandril MicroCentric 4-410-3-QC, sistema de medición MARPOSS con compensación dimensional automatizada, filtro de neblina de aceite S400, filtro de banda Knoll KF110/500, cinta transportadora abatible 320 S1 y otros accesorios. Es posible la inspección in situ.

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

Diámetro de giro: 200 mm, longitud de giro: 400 mm, diámetro de giro: 420 mm, diámetro de la barra: 60 mm, diámetro máximo del mandril del husillo: 160 mm, velocidad: 5000 rpm, torreta: 2, posiciones: 2x14, desplazamiento rápido X / Z: 20 m / min / 30 m / min. Dimensiones de la máquina X/Y/Z: aprox. 7500 mm/2100 mm/2100 mm, peso: aprox. 4500 kg. Documentación disponible. Es posible la inspección in situ.

turning diameter: max. 560 mmturning length: 600 mmcontrol: 840D powerline Siemensgreates pass round over bed: 680 mmSwing dia. over traverse guideway: 565 mmcentre distance: 620 mmMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 25 / 37 kWmax. Torque: 390 Nmspindle nose: 170H5 spindle bearing diameter: 120 mmusable bar diameter: 65 mmmax. chucking diameter: 250 mmC-Axis: 0,025° / 360 °Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1power capacity - Sub spindle: 25 / 33 kWmax. Torque: 213 Nmspindle bearing diameter: 90 mmspindle bore: 57 mmspindle nose: 140H5 C-Axis: 0,025° / 360 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tools: max. 4.500 min -1power capacity - driven tools: 12,2 kWtool taper: VDI 40 DIN 69880Tool dimensions with square shank: 40 mmaxis st ...

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 5500 mmturning height: 2600 mmturning speeds: 60 U/minmain drive motor: 60 / 75 kWControl: Fanuc 31iA workpiece weight max.: 45 tmilling head speed: 1500 U/minram head dimension: 400 x 400 mmmilling spindle drive: 22/25 kWtotal power requirement: - kWweight of the machine ca.: 140 tdimensions of the machine ca.: 12 x 10 x 9 mequipped with:- CNC control Fanuc 31iA- C-axis (0.001°)- Telescopic covers for the cross rail and column guides- 16-position automatic tool changer- Angular milling head- Chip conveyor- coolant through Spindle- Hydrostatic Bearing for the Main Axis Table- High Precision Roller Bearing- Table Main-axis Motor to Control and Drive the C-Axis- Synchronized 2-motor Drive Control System for Driving W-Axis for Cross Rail Movement- Backlash removal technology available when the C-axis is removed from the system.The data for this ad ...

turning diameter: max. 366 mmturning length: 705 mmcontrol: M 730 BM MAPPS IVgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. usable bar diameter: 80 mmchucking diameter: 250 mmSubspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmmax. usable bar diameter: ( - ) mmchucking diameter: 170 mmaxis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.tool taper: BMT 60 Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool P ...

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kW

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: m- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of ...

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura del centro: 102 mmDistancia entre ejes: 450 mmDiámetro del husillo: 25 mmVelocidad del husillo: 220 - 2600 Peso de la máquina aprox.: TDimensiones de la máquina aprox.: MNo se ha comprobado que losaccesorios estén completos Los armarios no están incluidos en el volumen de suministro

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1250 mmturning diameter over slide rest: 1000 mmturning length: 11000 mmtotal power requirement: kWweight of the machine ca.: 49 tdimensions of the machine ca.: mCenter height 720 mmCenter distance 11000 mmTurning diameter over bed 1250 mmTurning diameter over slide 1000 mmWorkpiece weight max 12 toSpeed 3-315 rpm - steplessMotor power 55 kW (DC)Equipment1 position indicator HEIDENHAIN | Type ND 780 for 1 axis1 four-jaw faceplate Ø 1000 mm1 fixed steady rest1 ring steady rest with four-jaw faceplate Ø 920 mm1 Autom. 4-pos. tool holder1 Chip conveyor1 Machine lamp1 Coolant device Operating key | operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 280 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 70 - 2000 U/mincentre height: 195 mmspindle bore: 54 mmtailstock quill taper MT: 3 MKconnected load frequency: 400 Vtotal power requirement: 2,2 kWweight of the machine ca.: 0.85 tdimensions of the machine ca.: 1,95 x 1,0 x 1,75 mProfessional industrial machine3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 0 mmturning diameter over slide rest: 900 mmturning length: 1.000 mmtotal power requirement: 25 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mHeight of centres 550 mmMax. turning Æ 1200 mmMax. turning Æ over slides, approx. 900 mmMax. turning length, approx. 1000 mmSpindle bore, approx. 90 mm24 spindle speeds 4.3 - 587 rpm Feeds, infinitely variable 1 - 170 mm/minTotal load, approx. 25 kW - 380 V - 50 HzWeight, approx. 8000 kgAccessories/specialitiesTwo separate slides, each equipped with 2-coordinate copyingequipment, program controlled by plugboard, strengthened bearingsand spindle, hardened an ...

turning diameter over bed: 250 mmturning diameter over slide rest: 140 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKtailstock quill stroke: 65 mmconnected load frequency: 230 Vtotal power requirement: 1,1 kWweight of the machine ca.: 0,15 tdimensions of the machine ca.: 1,3 x 0,6 x 0,65 mBenchtop lathe 3-axis LCD digital display system fully assembled.Longitudinal feed.3-jaw chuck 125 mm.4-jaw chuck 125 mm.Clamping plate.4-way steel holder.Clock for thread cutting.Drip trayHardened bed tracks.Emergency stop switch.Forage protectionSet of wheels.Appropriate tools.Base cabinet is optionalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 250 mmlongitud de torneado: 450 mmcontrol: TX8D diámetro: 80 mmvelocidad del husillo: 3150 U/min.Torno CNC con alimentación de barra y 3 torretas Diámetro interior del husillo muy grande, con dispositivodecarga de barra Por favor, pregunte por más detalles.

turning diameter: 250 mmturning length: 400 mmcontrol: C 200 / 8 total power requirement: 60 kWweight of the machine ca.: 8,5 tSwing Ø above bed, max. 300 mmMax. turning Ø for chucking work, approx. 250 mmTravel of Slides:Turret 1, X / Z travel 163 / 550 mmTurret 2, X / Z / Y travel 140 / 250 / 260 mmSpindle bore, approx. 65 mmTool holder bore 30 mmSpindle speeds 25 - 5,000 rpmFeed range 0 - 15,000 rpmSpindle drive 0.5 - 40 kWTotal electrical load 60 kW - 380 V - 50 HzWeight, approx. 8,500 kgAccessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing and pos ...