tornos usadas para la venta (3,082)

bar material dia.: 20 mmspindle passage: 22 mmturning length: 205 mmControl: Siemens Yaskawa bar material dia.: 20 mmturning speeds: 500-10.000 U/minc-axis: 0,001 °gripping station: 20 mmturning length: 30 mmpositive location each: 0,001 °Number of tools: 10 fest / fix St.total power requirement: 2,2/3,7 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,6 x 1,2 x 1,8 +FMB mdriven tools: 4+3+3 fire distinguisher: Kraft & Bauer bar loader: FMB minimag 18 1,5m Stangehigh pressure pump: ja/yes parts conveyor: ja / yes CNC-swiss type machine Star SR20-R, built 2002 with FMB Minimag 18,in good condition, comes from medical factory.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de torneado: 340 mm. longitud de tornado: 1000 mm—control: Mazatrol SmoothC, requerimiento total de potencia: kWpeso de la máquina, aprox. dimensiones de la máquina.

turning diameter: 350 mmturning length: 650 mmcontrol: 840 D SL ShopTurn Siemensgreates pass round over bed: 385 mmSwing dia. over traverse guideway: 350 mmMain spindle:: turning speed range - main spindle: 0 - 4.500 min/-1power capacity - main spindel: 11,5 / 8 kWmax. Torque: 340 Nmspindle diameter in front bearing: 130 mmspindle bore: 87 mmbar material dia.: max. 65 mmmax. chucking diameter: 250 mmspindle head: 170 h5 C-Axis: turret:: number of toolpositions: 12 pos.Shank diameter: DIN 69880: 30 mmDriven Tool Stations:: Number of driven toolspositions: 6 pos.Spindle speed - driven tool stations: max. 4.500 min -1power capacity driven tool-stations: 5,5 kWaxis stroke:: x-axis: 255 mmz-axis: 800 mmTailstock:: tailstock: 680 mmtaper of center: MK 4 clamping capacity: 6,8 kNfeeds:: feed speeds: 0 - 30.000 mm/minrapid traverse ( X / Y / Z ): 30 / - / 30 m/minFeed force ( X / Y / Z ): ...

Diámetro de la placa frontal: 4500 mm diámetro de oscilación: 5000 mm altura de torneado: 2500 mm peso máximo de la pieza de trabajo: 63 tno. de las correderas: 2 máx. carrera de la placa: 1600 mm rango de velocidad de giro en placa frontal: 0,3 - 32 U/minAnzahl der Drehzahlstufen: 4 necesidad total de potencia: 130 kWweight de la máquina aprox: 145 tdimensiones de la máquina aprox. 6,6 x 11,4 x 8,4 m - DRO - 2 Arietes giratorios (-15 / +40) Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter over bed: 1090 mmturning diameter over slide rest: 700 mmturning length: 6000 mmcentre distance: 6000 mmspindle bore: - mmspindle taper: - turning speed range: U/minpower requirement: 30 kW3-jaw-chuck diameter: mmquick change toolholder: 4 fach Stahlhalter taper in tailstock-quill: MK 6 dia. of quill: 125 mmquill stroke: 260 mmtotal power requirement: 30 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 8,2 x 1,8 x 1,82 m- rapid traverse- tail stock- DROThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diámetro de la placa frontal: 1000 mm. máx. par motor en el husillo: 900 potencia requerida total: 17 kWweight de la máquina aprox. 6,1 tdimensiones de la máquina aprox. mUn torno de torneado vertical con raíl transversal fijo Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 165 mmturning length: 800 mmtotal power requirement: 3 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 2 x 1 x 1,5 mNo. 1009Lathe WEILER LZ-300Speed range 24-2800 1/min.Feed rates 0.013-1.27 mm/minSpace requirement approx. 19 0x 700 mm,Weight approx. 700 kg.The e-lead spindle is removed from the machine3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessoriestool cabinet with various accessories.Working area: 165 x 600Drive: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mmturning length: 1540 mmcontrol: Fanuc 31i-B dimensions of machine: 5500 x 2700 x 3110 mmchip conveyor: 6900 x 2400 mmtotal power requirement: 94,42 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mTurning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle.Condition: Very well preserved, machine comes from a company liquidation.Time recording:Control unit on: 13127 hoursRuntime: 3833 hoursProcessing time: 2835 hoursThe upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning.Fanuc 31i-B CNC controlSwing diameter over bed: 1000 mmMaximum turning diameter: 760 mmMaximum turning length: 1540 mmMaximum bar diameter (manual/continuous): 76/76 mmY-axis travel: 230 mm (±115 mm)Clamp (counter s ...

turning diameter: 320 mmturning length: 500 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlcollet chuck device10-fold revolvertail stockchip conveyorTechnische Daten: / technical detailsmax. Drehdurchmesser / max. turning diameter 320 mmmax. Drehlänge / max. turning length 500 mmX-Weg / X-travel 180 mmZ-Weg / Z-travel 520 mmmax. Drehzahl / max. spindle speed 6000 UpM /rpmAnzahl der Revolverplätze / number of tool places 10 Gewicht ca. / weight ca. 3200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1790 mmturning diameter over slide rest: 1250 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight: 4500 kgcontrol: Siemens type: System 8 T mmturning speeds: 1,1-300 U/minsteady: mmsteady: mmtotal power requirement: 72 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this  ...

turning diameter over bed: 1250 mmturning diameter over slide rest: 900 mmturning length: 5000 mmfaceplate: 1250 mmworkpiece weight in steadies max.: 20000 kgsteady: mmsteady: mmworkpiece weight: 16000 kgtotal power requirement: kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with Mo ...

faceplate diameter: 2500 mmmax. swing diameter over bed: 2700 mmturning height: 2500 mmControl: Siemens 840D CNC workpiece weight max.: 30 tworkpiece dia.: 2500 mmCrossbar travel distance every 100 mm: 1200 mmPiston rod: 1500 mmram diameter: 250 x 250 mmtraversing speed: 8 m/minMax. vertical feed rate: 6000 mm/minMax. cross feed: 8000 mm/minSpeed of the machine table: 180 U/mintool changing time: 1 mincutting speed: 140 m/minCutting depth: 14 mmPower Capacity of main drive: 100 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 12,5 x 8,0 x 6,7 mFeatures/Accessories: - Crossbars every 100 mm, including locking mechanism- 2 ram units with a cross-section of 250 x 250 mm, travel distance 1500 mm- Both ram units can be moved through the center (100 mm each, i.e., both ball screws are offset from each other with collision protection- ZF gearbox for main drive: AC 100 kW / S1 Sie ...

swing diameter: 2000 mmturning height: 1800 mmControl: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/mincross rail adjustment - vertical: 1200 mmcross rail adjustment - horizontal: +/- 1150 mm: 1500 mmbit feeder section: 240 x 240 mmMinimum immersion diameter: 340 mmcutting capacity: 50 kNmax. torque on the faceplate: 50000 Nmspeed range step 1: 2,8 - 80 U/minspeed range step 2: 12 - 315 U/minMax. clamping weight: 12000 Kgpower capacity faceplate: 105 kWweight of the machine ca.: 33 tdimensions of the machine ca.: 10 x 5 x 6,5 mFurther technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/minFeatures/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyo ...

Se requiere un depósito de 1500,00 € para presentar una oferta por este lote. Para obtener los datos bancarios necesarios para la transferencia, por favor contacte con el representante de la subasta en alessandro.icardi@surplex.com. Diámetro de la barra 80 2 mm Tamaño máximo de herramientas para uso externo: 25 mm Tamaño máximo interno de la herramienta 40 mm Eje X de recorrido 225 (220+5) mm Eje Z: recorrido 1125 (1120+5) mm Mesas, utensilios y accesorios incluían Nota: No se ha verificado la funcionalidad de los productos. Se venden en su estado actual, sin garantía de funcionamiento. Auction-ID: A7-43861-1

turning diameter over bed: 1420 mmturning diameter over slide rest: 1000 mmturning length: 15000 mmturning dia. in gap: 2050 mmspindle diameter: 160 mmspeed: 1 - 400 U/minfaceplate diameter: mmspindle motor: 30 kWtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 4-jaw face plate- 4 Steady rest- 4-way toolpost- Rapid traverse- tailstock- Taper turning attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 520 mmturning diameter over slide rest: 260 mmturning length: 1600 mmturning diameter in the gap: - mmturning speeds: 14 - 710 U/mincentre height: 260 mmspindle bore: mmtotal power requirement: 11,0 KWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 4,0 x 1,4 x 1,6 mLead screw lathe- 4-jaw chuck 315mm- Multifix tool post size B- Feed in top slide- Steady rest- Machine feet- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de giro sobre la cama: 280 mm Diámetro de giro sobre el reposadeslizamiento: 170 mm Longitud de torneado: 600 mm Peso de la máquina aprox. 400 kg Paso del husillo: 26 mm Velocidades: 55-2000 U/mínimo Potencia requerida total: 1,4 kW Dimensiones de la máquina aprox: 1,5 x 0,8x 1,3 m Incluyendo soporte de rectificado EMCO SOD Incluyendo mandril EMCO de 4 mordazas Incluyendo patas de máquina Incluyendo cambios de engranaje Los datos para este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 100 mmturning length: 320 / 345 mmcontrol: Siemens 840 D swing diameter: 145 mmspindle distance: 580 mmslide I:: slide I - cross travel: (X1) 220 mmslide I - longitudial travel: (Z1) 320 mmy-axis: +/- 30 mmrapid traverse: (X/Y/Z) 30/15/30 m/minslide II:: slide II - cross travel: (X2) 120 mmslide II - longitudial travel: (Z2) 345 mmrapid traverse: (X/Z) 30 m/minSubspindle:: Travel subspindle: (Z3) 380 mmvertical stroke: (X3) 145 mmbar material dia.: max. 36 mmrapid traverse: (X/Z) 20/30 m/minpower capacity: (40/100 % ED) 26/21 kWspindle turning speed range: 40 - 7200 U/mintotal power requirement: 42 kVAweight of the machine ca.: 5,3 tdimensions of the machine ca.: mCNC turning and milling centre with Y-axis, 2 turrets, subspindle andbar feeder.A total of over 44,000 EUR has been invested in necessaryrepairs and maintenance over the last 5 years by DMG MORI (replaceme ...

faceplate diameter: 3600 mmswing diameter: 4500 mmturning height: 1850 mmmax. workpiece weight: kgvertical adjustment of the crossrail: mmtravel -x axis: mmtravel -y axis: mmtravel -z axis: mmturning speed range: 0,6- 50 U/minpower capacity: kWmax. torque on the faceplate: weight of the machine ca.: 72 tdimensions: mverticale turning machine double coloumn - digital scale - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de torneado sobre la cama: 330 mm Diámetro de giro sobre reposacabezas: 200 mm Longitud de torneado: 800 mm Consumo total de potencia: 3 kWweight de la máquina aprox. 800 kg Dimensiones de la máquina aprox: 1,9x0,7x1,2 Rango de velocidad de giro: 24-2800 U/min Accesorios 2 mandrillos rotatorios con mordazas de repuesto 5 soportes Multifix Conjunto de ruedas intercambiablesDiversas puntas y accesoriosLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

control: Fanuc - - -: - - - - - -- - -: - - - - - -Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant systemThe machine is in a well-maintained condition.Technical data of the machine will follow soon.We ask for your understanding !- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: VL4 | VL-4The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eje x: 332 mmz - eje: 625 mmcontrol: Fanuc Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 1500 mmturning length: 4500 (5500) mmcontrol: Siemens 840 Dsl max. workpiece weight between centres: 6000 kgtotal power requirement: kWweight of the machine ca.: 40 tdimensions of the machine ca.: mCNC machine configured as a 4-way center lathe with full travel over the steady rests and superstructuresZ-axis travel (longitudinal slide) = 5000 mm (6000 mm with TAE3)X-axis travel (transverse cross slide) = 1000 mmY-axis travel (vertical movement) = 350 mmMaximum workpiece diameter = 1500 mmSwing diameter over cross slide = 1500 mmCenter distance = 4500 mm (5500 mm with TAE3)The cross slide and cross slide do not restrict the diameter range due to their lateral positioning on the lathe bed. Therefore, there is no associated diameter restriction over the cross slide/tool carrier.The cross slide unit, including the cross slide superstructure, can travel completely past the ...

turning diameter over bed: 660 mmturning diameter over slide rest: 450 mmturning length: 2000- 2880 mmthroat: Ø 1200 x 880 mmHeight of centres: 330 mmspindle passage: 85 mmturning speed range: 10- 700 U/mintail stock: MK 5 transmission ratio: 24 tool holder: Multifix C dimensions: 3,5/4,4 x 1,45 x 1,1 mweight of the machine ca.: 4,2 tkonv. lathe with movable bed for long gap.- movable bed 880 mm- swing Ø in gap: Ø 1400 mm- 3- jaw chuck Ø 315 mm- facing plate Ø 800 mm- facing plate Ø 500 mm- rapid travers- some tool holdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mmturning length: 6000 mmcontrol: Siemens Si 840 D sl total power requirement: 155 kWweight of the machine ca.: 65 tdimensions of the machine ca.: 16350 x 3700 x 3850 mPurchase price EUR 1.550.000Time recording from Feb. 2025Operating hours = 38601 hMain spindle = 1958 hMilling spindle = 1760 hCNC control Si 840D slWorking area 6000 mmWorking height 1390 mmSwing diameter over bed slide/bed 820 mmX-axis travel +850 -25 mmZ-axis travel 6820 mmC-axis, smallest increment +/-0.001°Workpiece spindleSpindle head according to DIN 55026 A15Bathing through 160 mmFront diameter Bearing 240mm2-stage gearbox, infinitely variable programmableDrive power at 100/60% duty cycle: 78/87kWSpeed ranges: 2Speed range I: 10-501 rpmSpeed range II: 10-1750 rpmTorque I, 60% duty cycle: 8000 NmTorque II, 60% duty cycle: 2308 NmC-axisHolding torque with backlash-free spindle brake: 3000 NmSpe ...

turning diameter: 720 mmturning length: 3000 mmcontrol: Siemens 805 turning diameter over slide: 430 mmturning speeds: 1800 U/mintailstock quill taper MT: 6 steady: 3 Stückmain drive motor: 36 kWz-axis: 3050 mmx-axis: 410 mmswing diameter over slide rest: 430 mmspindle motor: 28 kWworkpiece weight: 3000 kgspindle passage: 106 mm3-jaw-chuck diameter: 305 mmchip conveyor: faceplate: mmtotal power requirement: . kWweight of the machine ca.: 6 tdimensions of the machine ca.: 4x2,4x2 mSteady rest 1: Diameter: 120-300 mmSteady rest 2: Diameter: 220-400 mmSteady rest 3: Diameter: 350-500 mmChuck: Diameter: 315 mmMaximum workpiece weight: 3 t (with steady rest)The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m ...

bar material dia.: 20 mmspindle passage: 22 mmturning length: 170 mmturning speeds: 10.000 U/minpositive location each: C-Achse 0,001° Gradgripping station: 20 positive location each: 1° Gradturning speeds: 10.000 U/minnumber of tools: 7+4+8 number of milling stations: 3 control: Fanuc Oi-TD turning length: 170 mmNumber of axles: 5 St.spindle hours: 16.000 hNumber of working hours: 35.000 htotal power requirement: 11 kWweight of the machine ca.: 1900 kgdimensions of the machine ca.: 1,64 x 1,2 x 1,73 + SBF mbar loader: Robobar SBF 320e 3200mm Stangeparts conveyor: nein oil mist filter: ARO swiss type machine Tornos Delta 20/5, built 2011, with barloaderRobobar SBF 20eExcellent conditions,from precision engineeringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.