máquinas llenadoras usadas para la venta (789)

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

A carousel for filling glass bottles and capping them with crown caps., Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Filling and capping machine for filling plastic buckets of various sizes with yoghurt and quark. The plastic buckets are placed onto the conveyor belt from the stack of buckets in the bucket magazine. The buckets are sterilised with hydrogen peroxide and steam using a heating cartridge prior to filling, and the lids are sterilised prior to sealing. The product is filled into the buckets using a calibratable load cell until a specified weight is reached. The sealer places lids from the lid magazine onto the buckets and presses them firmly into place., Additional title: weight-based filling, Capacity appr.: 450 units/h based on a 6.1-litre bucket; depending on container size and product viscosity, Power: 11 kW, Voltage: 400 V, Frequency: 50 Hz, Heating / Cooling: steam 3 bar; 10 kg/h, Compressed air: 6-8 bar; Qmax = 300 l/min, Length: 3708 mm, Width: 968 mm, Height: 2442 mm, Formats: 1.3-l ...

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5

Capacity: 360 Bo/h, Filling points: 6 pieces, Voltage: 230 V, Compressed air: min. 6 bar, Length: 1590 mm, Width: 700 mm, Height: 1875 mm, Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L, Base construction: steel rack, Features: including add-on parts, filling programm modifiable

Inspection machine for detecting damage and contamination in glass bottles, as well as for identifying foreign bottles., Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Length: 3,10 m, Width: 2,25 m, Height: 3,30 m, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5

Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m, Features: 8 capping heads

Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel

Four-station filling system for large cans and bottles., Additional title: Siphon filler, Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Se ofrece un sistema de llenado de botellas totalmente automático y protegido contra explosiones. Estación de servicio Mewes: 4 boquillas, adecuadas para productos alcalinos y ligeramente volátiles, tapadora, estación de etiquetado Pago. Capacidad máxima: 1000 unidades por hora, tamaños de contenedor: 150ml-1000ml, accionamientos neumáticos. Accesorios: plataforma de trabajo para la alimentación de productos en contenedor. Inspección con cita previa es posible.

El TBA 8 V110 1000ml Square es una solución Tetra Pak que ahorra espacio para el relleno aséptico seguro de líquidos. Su diseño cuadrado garantiza la máxima estabilidad y una exhibición eficiente en la estantería.

La Tetra Pak MultiShrink 62 es una máquina industrial de envoltura retráctil utilizada en líneas de llenado y envasado de bebidas y alimentos líquidos. Formación multipack (por ejemplo, disposiciones 3×1, 4×3) Envasado en película + encogimiento para recipientes estables Operación en línea en líneas de producción automática Alta velocidad para grandes cantidades de producción Industria de bebidas (leche, zumos, bebidas vegetales) Formación del embalaje de transporte y venta Estabilización de productos para almacenamiento y envío

Una máquina de llenado de base TB de 250 ml de Tetra Pak es una línea de envasado industrial que llena y sella productos alimenticios líquidos en cartones Tetra Brik (TB) con un volumen de 250 ml en formato "base"). Forma el cartón a partir de un material compuesto (rollo) Rellena el producto exactamente (por ejemplo, leche o zumo) en porciones de 250 ml Sella y forma el típico paquete rectangular "brik" Funciona de forma continua y completamente automática en una línea de producción Aplicación: • Industria de bebidas (leche, zumos, bebidas) • Productos frescos o no perecederos (dependiendo del tipo de máquina)

Tenemos un

El Tetra Pak EasyRide Conveyor es un sistema de transportadores especializado diseñado para el transporte y almacenamiento eficiente de cajas de bebidas en líneas de llenado asépticas

El TBA 19 125 ml Slim es un formato de embalaje delgado con una capacidad de 125 mililitros. Debido a su forma estrecha y compacta, es especialmente adecuado para porciones pequeñas, como inyecciones o empastes de prueba. El diseño ahorra espacio, es práctico y fácil de transportar.

La Tetra Pak TBA/8 110V es una máquina de llenado lineal aséptico probada para alimentos líquidos, especialmente conocida por su fiabilidad. A menudo se utiliza en lecheras para leche UHT, zumos o productos similares.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

A la venta hay una pequeña línea completa de relleno para vinagre o aceite en botellas de plástico. Actualmente, la línea está en 0,75 litros. y tiene una producción máxima de 4.000 botellas/h. La planta completa consta de las máquinas que se enumeran a continuación: 1. Búnker para botellas de plástico vacías, unos 6 m de largo, capacidad: unos 400-600 contenedores 2. Sistema de clasificación de botellas Kamman tipo K23F La máquina asegura que las botellas a llenar se transporten fuera de la máquina en vertical, con la boca orientada hacia arriba Capacidad de clasificación: aprox. 3.000-6.000 piezas/h 3. Cintas transportadoras 4. Relleno al vacío Leicht, marca Cobert tipo Olimpia20/95 Con 20 gasolineras Dimensiones: Peso LX Altura: 1.520x1.250x2.330 mm Diámetro posible de la botella: 55-120 mm Construido en 1989 6. Codificador de inyección de ...

Está disponible un rellenador automático de vasos para cubos. Diseño: máquina rotativa, pistas: 1, salida: aprox. 3000 tazas/h, volumen de llenado: 850ml/1000ml. Documentación disponible. Es posible realizar una inspección in situ.