máquinas de goma usadas para la venta (406)

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

clamping force: 800 kNinjection volume: 154 cm³screw diameter: 35 mmplaten size: 430 x 660 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 800 kN- Mould mounting area: 430 x 660 mm- Clamping/opening stroke: 450 mm- Maximum mould installation height without heating plates: 300 mm- Maximum plate spacing without heating plates: 750 mm- Clamping direction: from below- Ejector stroke: 130 mm- Ejector force: 40 kNInjection unit:- Increased injection pressure: 2,180 bar- Maximum injection volume: 154 cm³- Screw diameter: 35 mm- Screw length: 20D- Maximum screw speed: 20–400 rpm- Metering stroke: 160 mm- Injection: from above- Nozzle stroke:  ...

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

clamping force: -- kNinjection volume: -- cm³screw diameter: -- mmplaten size: -- mmCondition: second-hand,Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising3x machines, model SAD 114/30- Year of manufacture: 1999- Problems with the control system1x machine, model Super AD 76/15- Year of manufacture: 2006- Problems with the control systemThere are 3 machines built in 1999 and 1 machine built in 2006 available.The price is per unit. If you purchase several unitsa package price can be arranged.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgCondition: used,Specification: MDR Rheometer - second-hand for measuring the curing of rubber compounds with constant elongationtest functions- Sealed biconical matrices- Measurement of reaction torque with low friction- Excellent temperature stability and control- Repeatable and reproducible data- Measures dynamic propertiespower- Measurements of curing under almost real isothermal conditions- Excellent test sensitivity to mixing errors- Limited influence of the operator- Suitable for quality control or research and development- enterprise software- Sample cutter with constant volumeTechnical data- Testing standards: ASTM D5289 and ISO 6502- Temperature: ambient up to 200°C (392°F), optional 230°C (446°F)- Frequency: 1,667 Hz (100 CPM)- Elongation: 0.2°, 0.5° (standard), 1.0° ...

Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: 210 - 220 °Cpiston stroke:: ca. 400 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: 4-column vulcanising press 480 x 520 mm, used- Clamping force: 100 t- Closing action: bottom-up- Heating plates: 2 electric plates- Two new heating elements- Plate heating temperature: up to approx. 210–220 °C- Heating plate dimensions: 480 x 520 mm- Distance between heating plates approx.: 400 mm (to be determined during refurbishment)- Working height of lower plate: approx. 1,100 mm- AC motor: 5.5 kW (to be determined during refurbishment)- New solenoid valves- New control cabinet with Siemens 7 touch panel Type KTP700 Basic- Siemens S7-1200 PLC system- Schneider frequency converter- One remote mainte ...

chamber volume: - literuseable volume: 1,6 literfriction: - motor drive power: 18,5 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.6 l- Closing system: front door with pneumatic piston- Piston: pneumatic- Rotor geometry: tangential type- Oil-free self-lubricating sealing rings- New rotary union for water cooling- New main gearbox- New AC motor: 18.5 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in English or GermanT ...

roll diameter: 250 mmroll length: 600 mmrolls drilled: -- nip adjustment: -- drive power:: 46 kWCondition: usedSpecification: 3-roll I-calender 250x600 - used- Collin 3-roll I-calender 250x600Application: Smoothing/finishing of film materials up to 2 mm thick.Machine configuration: with unwinder upstream and rewinder downstream.- Upper and lower rollers adjustable for gap adjustment.- Roller diameter: 252 mm- Roller length: 600 mm (normally 500 mm)- Rollers 2, 3: temperature-controlled up to 320 °C- Heating power: 9 kW / roller- Speed: infinitely variable- Roller speed: +/- 8.6 rpm- Roll adjustment: 0 - 2 mm- Hydraulic unit: 2.2 kW- Oil cooler: 0.25 kW- Servo motor rated power: 1.4 kW / roll drive- Unwinding unit: 0.24 kW- Rewinder: 0.24 kW- Space requirement ...

roll diameter: 650 mmroll length: 2100 mmrolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kWCondition: used, completely overhauled, with warrantySpecification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls- Roll diameter: 650 mm- Roll length: 2100 mm- Peripherally drilled rolls for water cooling- Hydraulic gap adjustment: new- Hydraulic unit: new- Tiltable guide plates- Rolls mounted on bronze bearing bushes with corresponding lubrication system- NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings- Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit- New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for ...

roll diameter: 650 mmroll length: 2100 mmrolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kWCondition: used, completely overhauled, with warrantySpecification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine- Roll diameter: 650 mm- Roll length: 2100 mm- Peripherally drilled rolls for water cooling- 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz- Cardan joints between gearbox and rolls- New drive gearbox- Hydraulic gap adjustment: new- Hydraulic unit: new- Tiltable guide plates- Rolls mounted on bronze bearing bushes with corresponding lubrication system- NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes- Rolls with new ball joints, manufactured by Johnson-Fluiten, for conn ...

chamber volume: 4 und 5 literuseable volume: -- literfriction: - motor drive power: 2x 37,5 kWCondition: used or reconditionedSpecification: 2x laboratory internal mixer – usedConsisting of two mixing chambers: Type: GK4N- Capacity: approx. 4 litres- Rotor geometry: tangential type- Ram: pneumatic- 1 independent DC motor: 37.5 kW Type: GK5E- Capacity: approx. 5 litres- Rotor geometry: Interlocking rotors type- Ram: Hydraulic- 1 independent DC motor: 37.5 kW The system can be sold in its current condition. Currently not functional due tosevered cables, or refurbished with newelectrical parts, with CE certification and warranty.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tornillo ø:: 60 mm longitud del tornillo:: 15D velocidad del tornillo: -- U/minCondición: usadoEspecificación: extrusora de goma – usada - Diámetro del tornillo: 60 mm - Longitud aprox.: 15D - Vendido tal y como se ve. El comprador es responsable de las normativas de seguridad. Sin marca CE. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

screw ø:: 90 mmscrew length:: 16D screw speedl:: ca. 40 U/mindrive power:: 48,5 kWCondition: used, overhauled to order, including warranty, including CE markingSpecification: extruder – used with feed roller- Screw diameter: 90 mm- Screw length: L = 12D- Screw speed approx.: 40 rpm- Motor rated power: 48.5 kW- Belt drive, number of belts: 5- Number of heating/cooling zones: 4- Voltage: 3x 380V, 50Hz, NFor further details, please refer to the attachment.Price on request, depending on design and customer requirementsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 700 mmroll length: 1800 mmrolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kWCondition: usedSpecification: 4-roll L-calender 700x1800 - used- BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1- Reverse L-shaped roller arrangement- The system was used for the production of PVC films- Film thickness: 0.05 - 1 mm- Can also be used for rubber- Maximum product width: 1,600 mm- Working speed: 6 - 60 m/min- System features roll bending and cross axis- BUZULUK temperature control and stretching device behind the calender- Year of manufacture: 1996- Consists of 13 stretching and pulling rollers behind the last roller of the calender- The device is supplemented by 4 polishing rolls,- these 4 polishing rolls are temperature-controlled,- all rolls are driven via cardan joints,- all rolls can be temperature-control ...

screw ø:: 30 mmscrew length:: 16D screw speedl:: -- U/minCondition: used,Specification: Extruder - used- screw diameter: 30 mm- screw length: L = 16 D- with feed roller- Extruder water tempered,- Cylinder and head one tempering zone- Feed section can be cooled or heated- Flow rate adjustable- Screw compression approx.: 1:1.2- Spraying head for hoses and profiles- Various injection moulds are available- Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate- Mass pressure measurement and display available- Operating and display elements are installed in the switch  ...

machine measurements: B/H/T 925 x 1.750 x 1.500 mmmachine weight: 550 kgpower capacity: -- kWCondition: used, very good conditionSpecification: Pad Printing Machine TPX 501 TFC E sealed Pot System - used only approx. 3 years in useconsisting of:- Pad printing machine with closed ink system cliché size 450 x 220 x 0,7 mm equipped for 4-colour printing Print head with ceramic ring 96 mm incl. machine base (for a description see appendix) - printing capacity max.: 900 - 1.600 prints/hour - Drive TPX: pneumatic - Control: Microprocessor with EPROM - Tampon stroke: electronically infinitely variable programmable - Tampon vertical stroke: max. 160 mm - pad outreach: max. 149 mm - Weight with base: approx. 550 kg - Dimensions W/H/D: 925 x 1,75 ...

chamber volume: - literuseable volume: 1,8 literfriction: - motor drive power: 30 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.8 l- Closing system: trap door system- Piston: pneumatic, for filling material- Rotor geometry: interlocking type- Oil seals with pump lubrication- New rotary union for water cooling- New main gearbox- New AC motor: 30 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in EnglishThe data for this ad was  ...

disponible Tunnel Batch off de VMI ¡Descripción adjunta!

¡Nuevo cortador en zig-zag! La máquina está diseñada para cortar un lote de 800 mm en una tira sin fin para la alimentación de la extrusora. ¡Garantía de 12 meses! ¡Descripción adjunta!

Key data: 305 mm, 550 mm

Molino de 22" disponible ¡Descripción adjunta!

Key data: 190 mm, 450 mm

¡Molino de laboratorio disponible! ¡Descripción adjunta!

Key data: 340 mm, 700 mm

Molino de 27" disponible ¡Descripción adjunta!

Key data: 550 mm, 1500 mm

Tren de laminación 60" ¡Consulte el archivo adjunto para obtener más detalles!

Key data: 550 mm, 1500 mm

Laminador de 550 × 1500 mm, fabricado por Bata en 1937. Esta máquina histórica es totalmente funcional y puede usarse tanto en producción como como pieza de exhibición.

Key data: 300 mm, 600 mm

Diámetro: 300 mm Longitud: 600 mm Superficie: lisa Ajuste NIP: manual Motor: 30 kW Siemens Dimensiones: aprox. 1700 x 1560 x 1635 mm Peso: aprox. 3000 kg Marca CE desde 2018 (motor con marcha atrás, parada de emergencia de rodilla)

Capacidad: 75 kg Capacidad de producción máx. 800 kg/h Peso en blanco 0,25 - 3100 g

Key data: 400 mm, 1000 mm

Buzuluk 14231 Conversión CE en 2010 Rodamiento antifricción Motor: 55 kW Ajuste de espacio motorizado Placa base

3-5 carretes calendario Buzuluk Número de carretes: 4 uds. Diámetro del rollo: 150 mm Longitud del rollo: 400 mm

Prensa 400x500 hacer ZDA Tipo 100660 Operado manualmente Placas calentadas eléctricamente Fuerza de sujeción 1540 kN

Key data: 300 , 600

Rodillos: dia. 300 x 600 mm Superficie del rodillo: lisa Tipo de rodillos: perforado centralmente Ajuste dividido: Manuel Motor: 22 kW