máquinas de bebidas usadas para la venta (2,149)

Buceador de maceración / RIEGER completo con dispositivo de sobrelavado y cilindro de tamiz con camisa de refrigeración y sistema de control Características Volumen 5300 L Material nº V2A Altura total 6600 mm Altura de pies: 2100 mm Longitud del cilindro: 1900 mm Diámetro exterior 1900 mm Descripción Tierra vegetal: Fondo de badajo con alcantarilla de aproximadamente 400 mm Cilindro: Grifo de cata Socket roscado DN65 Socket roscado DN80 DN80 central de vaso roscado Control en la cabina de control lateral Gran salida con corredera Parte inferior: 4 pies esféricos, ajustables en altura con arandelas Bandeja con boquilla roscada DN80 Como estándar, el contenedor tiene: Superficie de doble camisa para enfriar o calentar La posibilidad de un control de temperatura totalmente automático Control automático del proceso de fer ...

Buzo de maceración / buceador completo RIEGER con dispositivo de sobrelavado y cilindro de tamiz con camisa de refrigeración y control en V2A exterior Características: Volumen 10.000 L Material nº V2A Altura total 6300 mm Longitud del cilindro: 2400 mm Altura de pie 1200 mm Diámetro exterior 2300 mm Diseño de la camisa de calefacción/refrigeración Descripción: Tierra vegetal: Fondo de badajo con alcantarilla de aproximadamente 400 mm Cilindro: Grifo de cata Socket roscado DN65 Socket roscado DN80 DN80 central de vaso roscado Control en la cabina de control lateral Gran salida con corredera Parte inferior: 4 pies esféricos, ajustables en altura con arandelas Bandeja con boquilla roscada DN80 Como estándar, el contenedor tiene: Superficie de doble camisa para enfriar o calentar La posibilidad de un control de tempera ...

Depósito de maceración RIEGER de 12.500 litros con bobinas de refrigeración Volumen 12500 L Material nº V2A Altura total 3700 mm Longitud total 3500 mm Longitud del cilindro: 2400 mm Diámetro: 2250 mm Permisible. Sobrepresión de funcionamiento 2 bar Permisible. Temperatura de funcionamiento 30 bar Descripción Material: Material: V2A - AISI 304 Superficie: exterior e interior 2B =IIIC Frente marmoleado Arriba: - Boquilla roscada DN 50 – centro de posición - 2 Ojos de grulla - Cartucho de alcantarilla de 410 mm Cilindro del depósito: - Con pala con raspador, con refrigeración integrada en la pala - con alcantarilla de 420 x 320 en el lateral - Con grifo de cata DN 20 - Con manguito de eje de sumergido con sensor - con esclusa de aire DN 50 - con gran deslizador de salida co ...

Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 mobile CIP units Tank capacity: 100 L (alkaline + acid) Canning Line (Wild Goose GOSLING, 2021) Semi-automatic Formats: 0.33 L / 0.44 L / 0.50 L Cooling (Quantor Chilly MAX 50L) Glycol chiller for CCTs ...

Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET  Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of han ...

Resumen Esta etiquetadora de palets fue fabricada en 2007 por la empresa alemana Logopak.  Fabricante: Logopak Modelo: 920 PF Etiqueta autoadhesiva para palets. Tamaño de la etiqueta: A5

Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with ...

Resumen: Fabricado en 2004 por la empresa alemana Dr. Datz Maschinenbau GmbH, este fiable tapador de alambre de 24 cabezas está diseñado para sellar de forma segura los cierres de alambre de las botellas. Una máquina de alta calidad construida en Alemania, ideal para operaciones de tapado eficientes y precisas en líneas de embotellado. Detalles técnicos: Fabricante: Dr. Datz Maschinenbau GmbH Tipo: BVM 24R Año de fabricación: 2004 Número de estaciones de tapado: 24 Tipo de cierre: Cierres de alambre Dirección de la máquina: De izquierda a derecha

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Closure types: Crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Incl. dummy bottles and ...

Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...

Tribloque de vidrio KOSME modelo Barifill RFC Sistema de llenado de tubos cortos, con 60 válvulas de llenado, 50 estaciones de enjuague y tapador de rosca de aluminio de 10 dígitos Año de fabricación: 2013 Rendimiento: 0,33 litros. Botellas de vidrio - 20.000 bph 0,75 litros. Botellas de vidrio - 16.000 bph Altura: 113 mm Control: Siemens S7 Toda la planta fue completamente renovada en diciembre de 2025 y se encuentra en muy buen estado técnico. Disponibilidad: desde noviembre de 2026.

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...

Resumen Esta máquina de inspección de niveles de llenado y cierre fue fabricada en 2010 por la empresa alemana KHS. La vista de operación se realizará con la máquina de inspección de etiquetas de Indspect. Está diseñado para comprobar la altura de llenado, el cierre y la etiqueta de botellas completas. La máquina funcionó hasta enero de 2025 y ahora está almacenada en la empresa. Datos técnicos Capacidad: hasta 25.000 bph Alcance de entrega Nivel de relleno y sistema de inspección de cierre | Sistema de inspección de etiquetas KHS | Indspect

Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A 

Overview This tray packer was manufactured in 2012 by the german manufacturer MEYPACK. It is already dismantled and stored in the BEVMAQ warehouses. The conveyor system is not included, the inlet and tray magazine are included. Technical data  type: VP500 year of manufacture: 2012 Total output: 20 cycles/min length 8000 mm | width 1600 mm | infeed and outfeed height: 1250 mm packaging data:  length: 100-300 mm width: 200-450 mm height: 60-350 mm height of tray edging: 40-100 mm pre-cut: length: 200-500 mm width: 290-600 mm power: 400V,N,PE | 10kW/33A |  air: 6-7 bar | 20 NL/cycle

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Equipamiento: cinta transportadora ajustable en altura, sistema de clasificación y alimentación de tapas, cinta transportadora con sección de entrada y salida, construcción en acero inoxidable, carcasa de seguridad con puertas de seguridad interbloqueadas, armario de control eléctrico integrado y panel de operador, la máquina está diseñada para procesar cerrojos Pano TO de 100 mm PP HOmao sin revestimientos. La inspección in situ es posible.

Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data Line type: Complete can filling line Capacity: approx. 6,000 cans/hour Main year of manufacture: 2007 Application: Beer, CSD and ca ...

Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical ...

La Meurer CM TP 22 WA es una máquina automática de embalaje para el embalaje secundario de botellas, latas, cartones y productos similares. Dependiendo del diseño del producto, la máquina es adecuada para envasado en bandeja, envasado en película retráctil o envasado combinado de bandeja/film en líneas de producción de bebidas y alimentos.

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

Overview This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data Manufacturer: Bohrer Maschinenbau Model / Type: R40 Machine Type: Crate washing machine Year of Manufacture: 2000 Origin: Regenstauf, Germany Application: Washing / cleaning of beverage crates Construction: ...

Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Manufacturer: SMI Model: LSK 45 T Machine type: Shrink wrapping machine (film packer) Year of manufacture: 2002 Capacity: approx. 45 packs per minute Packaging type: Shrink film (with film discharge) Application: Packaging of beverage multipacks Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2 ...

Está disponible una máquina combinada de relleno y tapado de botellas rotatorias, MAG Schymanski (monobloque de relleno), con cabezas de tapador, renovada en 2023. Fabricante de la tapadeira: Arol, tipo de tapadora: Euro VA, sistema de llenado: rellenador rotativo, válvulas de relleno: 28, cabezas de tapado: 4, rango de capacidad de llenado: 3500 botellas/h-6000 botellas/h. Documentación disponible. Es posible realizar una inspección in situ.

Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data Capacity: approx. 33,000 bottles/hour Formats: 0.75 GDB DN2 0.5 L longneck beer 0.33 L longneck 0.25 L individual bottle Application: Cold-glue labelling of beverage bottles Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates Label positions: Front, back, neck Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

€ 2950 netos Filtro de tierra de diatomeas de MAG, fabricado en Alemania de 3 m², en perfecto estado. Área de filtración de 3 m², cribas horizontales, filtración residual, bomba de producto. Con tanque dosificador de acero inoxidable. Gafas de visión iluminadas, agitador integrado, bomba dosificadora ajustable. Listo para usar.

Máquina de tapar cabezas MAG 1 de Wine Plant Cabezas MCA y BVS disponibles Año de fabricación: 2001 Ordenación automática para MCA