máquinas de bebidas usadas para la venta (2,036)

- Etiquetado de botellas

- Especial: con pass-through para caja - Muy pocas horas de funcionamiento - Condición: Tan bueno como nuevo Dimensiones: - Longitud: 3300 mm - Ancho: 900 mm - Altura: 1800 mm

- De acuerdo con el diseño de los transportadores de botellas - Según el diseño del transportador de cartón - Con control central

- Área del filtro: 6 m2 - Máquina en buen estado

- Potencia: 20 a/h - Con comprimido integrado - Con solapa para ajustar las bayas y Apretando o simplemente apretando Dimensiones: - Longitud: 2250 mm - Ancho: 650 mm - Altura total: 1650 mm - Altura del bastidor en U: 600 mm

- Cilindro de vidrio de pie - Sin válvula de relajación de presión para la botella de gas - Conexiones: 1" gas

- Construido: 1996 - Semiautomático

- Material: acero inoxidable - Longitud: 3000 mm - Ancho: 600 mm Interior 1200 mm exterior

- Máquina monojefe - Dirección de marcha: R - L - Varios formatos de botella - Condición: muy buena

A two-component premix system H-Falterbaum (Famix) for the production of soft drinks from water and syrup with carbonation is available. Mixing capacity: 6000l/h, degassing: vacuum degassing, max. vessel pressure: 6.5bar, machine dimensions X/Y/Z: approx. 2500mm/1250mm/2500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fe ...

Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  Capacity: Max. 13,600 bph Formats: 0.50 L 1.00 L 1.50 L Neck finish: PCO 1881 Alaska Number of cavities: 8 moulds Operating hours: Approx. 35,000 h Scope of Delivery  KRONES CONTIFORM S8 stretch blow moulding machine Preform hopper and feeder Chiller 6 sets of moulds Spare parts

Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: Capacity: app. 2.800 crates/h Formats: 0,7 l GDB in 12er crates 0,5 l GDB in 12er crates Crate dimension: 356 x 275 x 257 mm (0,5 l GDB) 356 x 275 x 346 mm (0,7 l GDB) Electrical control Siemens S7 control Caps For the decapping of aluminium and plastic caps, 28 mm

Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo

Overview  This Heuft Glas InLine reflexx IR is an inspection machine for empty bottles, designed for quality control in filling lines. The machine has a maximum output of 46,000 bottles per hour and was originally delivered in December 2011. It is in very good condition and ready for use at short notice. The flow direction is from left to right and it is equipped with a Secomak blower instead of a compressed air blow-off system. Technical details  Output: Maximum 46,000 bottles/hour Flow direction: Left to right Equipment: Two triggers Secomak blower Transponder recognition for RFID test bottles Rejection monitoring Heuft HLAN network (can be retrofitted as an option) Two-way rejection Delta K to the right Four type licenses Delta K tripods for belt height of 1130 mm Two fluids for lye detection Missing components Infeed control (must be added if required) Thread blow-off (must be adde ...

Overview The tangential filter system was built in 2021 by the Spanish company sefiltra and used for the filtration of beer. The owner had purchased all the equipment to set up a microbrewery but then decided to shift the production of his beer to a bigger brewery, producing for him.  Techn. details  Filtration system is mounted on stainless steel frame with rollers  Control system: Siemens S7  4 filter cartridges  Recirculation pump CIP connection options Filters particles from 300 µm

Overview  This depalletizer and palletizer system for returnable glass bottles in plastic crates was manufactured in 1992 by German company KETTNER. The system was operated in a returnable glass (RGB) line for 330 ml bottles running at 43,000 bph until September 2025. It is still installed with energy disconnected, stopped since September 2025, and available immediately. Visits are possible on request. Technical data  Capacity: Up to 60 pallets/hour Application: Returnable glass bottles (RGB) in plastic crates Formats: 330 ml Operating status: Stopped; energy disconnected Scope of Delivery  KETTNER depalletizer KETTNER palletizer Platforms ROBOPAC stretch wrapper

Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 N ...

Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrappi ...

Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water ...

Overview  This semi-automatic pouch filling machine was manufactured in 2010 by AIT. The machine is available for sale because it is no longer in use by the seller. It is suitable for filling liquids and semi-liquid products into Doypack bags with screw caps. Thanks to its simple and user-friendly interface, the AIT DOYPACK is ideal for small to medium production volumes. The machine is promptly available. Technical data Capacity: Up to 600 bags/hour (depending on product viscosity and format) Volume range: 0.5L – 3L Pressure: min. 6 bar Bag type: Doypack with screw cap Filling principle: Gear pump with high-precision flowmeter Operation: Semi-automatic (manual bag positioning, automatic filling and capping) Frame: Stainless steel Cleaning/Sterilization: Integrated cleaning and sterilization functions Control panel: Touch screen Scope of Delivery  AIT DOYPACK semi-automatic filling a ...

Overview The decrater, used for unpacking bottles from crates, was manufactured in 2020 by Mühlbauer and is in excellent, like-new condition. It is ideal for automatically unpacking various bottle formats and crate types in the beverage industry. Technical Specifications  Capacity: 8,000 bottles per hour Supported Bottle/Crate Formats 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle modular crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle modular crate 0.33 l Vichy bottle / 24-bottle modular crate Scope of Delivery  Bottle unpacking unit Mühlbauer Satelite AP-0400-H

Overview This brewhouse was manufactured in 2020 by Chinese company Shandong Yuesheng. It is a 10 hL two-vessel system designed for small to medium-sized breweries, equipped with mash/lauter tun, wort kettle, and an additional 20 hL hot water tank. The brewhouse includes steam heating, integrated pumps, and auxiliary equipment, offering a compact and professional solution for efficient beer production. The unit is in good condition and will be available by the end of April 2026. Reason of the replacement is that they will go to a new 20hl brewhouse. Technical data  Capacity: 10 hL brewhouse, up to 2 batches per day Formats: Beer, up to 20° Plato initial density Vessels: 2 (mash/lauter + kettle/whirlpool) + 1 hot water tank (20 hL) Power supply: 5.5 kW Air supply: 6 bar Construction: SUS304 stainless steel, mirror surface treatment, PU insulation (100 mm), polished welding seams (Ra � ...

Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer

Overview  This fill level inspection machine was manufactured in 2017 and the label inspection machine in 2015 by German company Vision-Tec. The pusher was made by German company BBULL. It is designed for checking the fill height, closure and label of full bottles. The machine is until October 2025 in running production. Technical data Capacity: Adjustable Scope of Delivery  Fill level inspection system | Vision Tec | 2017 Label inspection system | Vision Tec | 2015 Reject system | BBULL

Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power su ...

Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms

Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph

Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles S ...

Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz