tornos usadas para la venta (2,977)

Altura de la punta: 250 mm Ancho central: 2000 mm Ø circunferencial: sobre la cama 500 mm Diámetro del husillo: 50,8 mm Soporte de husillo: tamaño 6 Contrapunto del cono de recogida: 5 MK Velocidades del husillo: 22 - 2000 rpm Avances: longitudinal/plano 0,05-6,4/0,025-3,2 mm/rev Pasos de rosca: 80 - 1 mm Conexión eléctrica: 380 V, 5,5 kW Espacio necesario: 3600 x 1100 x 1500 mm Peso: 1875 kg

bar material dia.: 32/38 mmspindle passage: 44 mmturning length: 320 mmturning speeds: 200-8000 U/minc-axis: 0,001 Gradgripping station: 32/38 mmturning length: 120 mmturning speeds: 200-8000 U/minc-axis: 0,001 0number of tools: 13 fixnumber of milling stations: 4+5 drivencontrol: Mitsubishi Meldas Number of axles: 5+2 St.total power requirement: 7,5 kWweight of the machine ca.: 2850 kgdimensions of the machine ca.: 2,5 x 1,4 x 1,75 + Irco mbar loader: Breuning Irco Simag fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader Breuning Irco SimagON/OFF 23.471hRunning hours 21.495hGBL function (standard)LFV function: noThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 730 mmcontrol: FANUC 21i rapid traverse: 15/24 mm/minspindle turning speed range: 4000 U/minspindle motor: 19 kWx-axis: 240 mmz-axis: 640 mmrapid travel (x and z-axis): 18 /24 m/minspindle bore: 66 mmtailstock quill taper MT: 5 tailstock quill stroke: 120 mmtotal power requirement: 50 kVAweight of the machine ca.: 5,5 tdimensions of the machine ca.: 3 x 1,7 x 1,8 m- CNC control FANUC 21i-TB (with Manual Guide I)- hydraulic hollow clamping cylinder- 12-position tool turret, driven tools 4000 rpm, 2.8 kW- Tool monitoring- SMW Autoblok KNCS N225-65 chuck- C-axis (with disk brake for milling operation, Transmit software for end face machining and cylinder interpolation for shell machining)- B-axis- Tailstock (MK 5)- Chip conveyor- Coolant system with high-pressure pump- Parts catcher- Radial and axial milling headsTranslated with DeepL.com (free versio ...

turning diameter: 120 mmturning length: 380 mmcontrol: Fanuc 18 iTB max. swing diameter: 300 mm: : 8000 min/-1: 7,5 kW: 26 Nmspindle nose: 100 mmspindle passage: 32 mmA-Axis: : 8000 min/-1: 5,5 kW: 23 Nmspindle nose: 100 mmspindle passage: 32 mm: : 12 pos.tool taper: VDI 16 Sub Spindle: x-axis: 400 mmz-axis: 400 mmfeeds:: rapid traverse: 12 m/mintotal power requirement: 20 kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,8 x 2 x 1,7 m2022 New glass scale Heidenhain and replacement of smaller parts, new FANUC CNC KeyboardCNC - Ultra precision turning centre (X-, Z-, E-, C-Axe)- CNC control Fanuc 18iTB- Main and counter spindle- SAUTER tool turret 16-fold (0.5.480.510) VDI 16- Linear tool slide- automatic doors- Chip tray- Coolant system with fine filter (high Pressure Pump)- 3 jaw chucks- Various clamping devices/pressure collets- Various tool holdersControl On: 240 ...

centre height: 255 mmcentre distance: 1080 mmturning diameter over bed: 500 mmturning diameter over slide: 290 mmturning length: 1000 mmspindle taper: KK 8 DIN 55027control: Sinumerik 810 D SIEMENSbed width: 360 mmspindle bore: 70 mmturning speed range: 2 - 2800 U/minrapid travel - longitudinal/face: 10 / 5 m/minquick change toolholder: MULTIFIX Typ B / CAPTOdrive capacity - spindle motor: 11,0 kWtaper in tailstock-quill: MK 5 dia. of quill: 80 mmquill stroke: 160 mmcoolant: voltage: 400 Vtotal power requirement: 16,0 kVAweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,85 x 1,60 x 1,80 mchip conveyor: 4,00 x 0,40 x 1,50 m- Serial-No.: 346 / 03- control: SIEMENS Sinumerik 810 D- quick change tool holder MULTIFIX- coolant equipment- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1800 mmswing diameter: 2000 mmturning height: 1500 mmControl: SIEMENS 840 D workpiece weight max.: 5000 kgram head dimension: 250 x 250 mmtable turning speeds: 1 - 320 U/minpower capacity - table: 100 kWTorque: 31784 Nm0: 218 kwweight of the machine ca.: 55 tDimensions:- Turning diameter on the faceplate 2000 mm- Faceplate diameter 1800 mm- Turning height with turning head L100 1500 mmPower on the ram:- Clamping force of tool holder or accessories 120,000 N- Max. Feed force Z and X axis 30,000 N- Drive power of the milling, drilling and grinding spindle 37 kW- Speeds for turning 10 - 3000 rpmTravels:- Axis X, horizontal support on the crossbeam -2270/+2275 mm- Axis Z, vertical support on crossbeam 1250 mm- Axis C, table rotation 360°Feed speeds:- Axis X 15,000 mm/min- Axis Z 15,000 mm/min- Axis C 3.25 rpmCoolant system:- Coolant ...

faceplate diameter: 1200 mmswing diameter: 1600 mmturning height: 1250 mmslide adjustment: 800 mmControl: Siemens type: 840 cpower capacity: 56 kW: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mmturning diameter: 4000 mmcentre distance: 16000 mmturning speeds: 0,71-33,5 U/minRest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kgmax. workpiece weight between centres: 18000 kgPlate area: mmtotal power requirement: 31 kWweight of the machine ca.: 60 tdimensions of the machine ca.: 22x5x4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mmturning diameter over slide rest: 650 mmturning length: 3500 mmspindle bore: 108 mmfaceplate: 1000 mmsteady: 500 Control: Siemens type: 840 D bed width: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1440 mmturning diameter over slide rest: 960 mmturning length: 8200 mmfaceplate: 1250 mmbed width: mmturning diameter in the gap: 1460 mmlength of gap: 460 mmturning speeds: 1,8-400 U/minsteady: workpiece weight: 22000 kgtotal power requirement: 46 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mmswing diameter: 5100 mmturning height: 2505 mmcross rail - adjustment: 1500 mmmax. ram stroke: 1250 mmslide adjustment: 2000 mmcontrol: Siemens 8 T tool changer: 16 STK table load: 60 tfaceplate turning speed range -stepless-: 0,8-100 U/minfeed: 0,0 1-1000 mm/minrapid traverse: 6000 mm/mindrive of main spindle: 75 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 9,3 x 6,1 x 6,0 mmachine is in an excellent conditionwith div. acessories (photos available)machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 45 mm: 2,25/3,25 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1000 mm: 190 mm: 54 mm: 5,5 kW

: 0400 mm: 1250 mm: : 200 mm: 55 mm: 315 mm: 2700 U/min : D1-6 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,3 x 0,65 x 0,6 mlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 290 mmturning diameter over slide rest: 170 mmturning length: 750 mmturning speeds: 75 - 2000 U/mincentre height: 145 mmspindle bore: 38 mmtailstock quill taper MT: 3 MKtailstock quill stroke: 80 mmconnected load frequency: 230 Vtotal power requirement: 1,5 kWweight of the machine ca.: 0,34 tdimensions of the machine ca.: 1,3 x 0,75 x 0,7 mLongitudinal and transverse feed.3-jaw chuck 160 mm.4-jaw chuck 160 mm.faceplate4-way steel holder with 4 pcs tool holders2 pcs. bezelsMachine lightDrip trayHardened bed tracks.Emergency stop switch.Feed protectionSet of wheels.Machine tools.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 380 mmturning speeds: 70 - 2000 U/mincentre height: 180 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 oder 400 Vtotal power requirement: 1,8 kWweight of the machine ca.: 0.65 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 mProfessional industrial machine3-axis digital display3-jaw chuck 180 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotating4-fold steel holder.Halogen machine lightMachine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mmturning length: 1250 mmcontrol: INDEX, C 200-4 D swing diameter: 630 mmtravel x1: 320 mmtravel z1: 1250 mmtravel x2: 170 mmtravel z2: 1250 mmtravel x3: 320 mmtravel z3: 1250 mmmain spindle speed: max. 3000 U/minmain spindle drive: 53 kWspindle passage: 102 mmspindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nmsub spindle - spindle speed range: max. 3000 U/minsub spindle drive: 53 kWsub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nmtravel sub spindle: 1250 mmfeed power: X1 14000/Z1 14000 Nrapid traverse: X1 20/Z1 40 m/minfeed power: X2 8600/Z2 14000 Nrapid traverse: X2 20/Z2 40 m/minfeed power: X3 14000/Z3 14000 Nrapid traverse: X3 20/Z3 40 m/minnumbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head positions: Rev. 3 = 12 n ...

turning diameter: 500 mmturning length: 1500 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,3 tdimensions of machine L x W x H: 3,45 x 1,65 x 1,93 mAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmcentre height: 205 mmcentre distance: 1000 mmspindle bore: 47 mmspindle turning speed range: 28 - 1250 U/minfeeds - longitudinal: 0,03 - 8,8 mm/Ufeeds - cross: 0,006 - 1,84 mm/Uthread - mm pitch: 0,25 - 76 mmthread - inch: 1/2 - 152 Gg/thread - module: 0,25 - 22 mmbed width: 320 mmtailstock quill diameter: 55 mmtailstock taper MT: 4 face slide travel: 290 mmupper slide travel: 120 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,3 tdimensions of machine L x W x H: 2,32 x 1,15 x 1,22 mAccessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Altura del eje: 400 mm Anchura del centro: 1250/1300 mm Ø circunferencial: sobre la cama 440 mm Diámetro del husillo: Soporte del husillo: Contrapunto del cono de recogida: 5 MK Velocidades del husillo: 11,2 - 2240 rpm Avances: longitudinal/plano 0,1-2,8/0,05-1,4 mm/rev Pasos de rosca: Conexión eléctrica: 380 V, 11 kW Espacio necesario: 3400 x 1400 x 1300/1700 mm Peso: aprox. 2700 kg

Altura del centro: 300 mm Ancho central: 1000 mm Ø circunferencial: sobre la cama 610 mm Diámetro del husillo: 71 mm Montaje del husillo: tamaño 8 Contrapunto del cono de recogida: 5 MK Velocidades del husillo: aprox. 11,2 - 1800 rpm Avances: longitudinal/plano 0,014-16/0,063-7 mm/rev Pasos de rosca: 0,1 - 112 mm Conexión eléctrica: 380 V, aprox. 5,5 kW Espacio necesario: 2900 x 1450 x 1750 mm

control: FANUC 21i-TB Control eje x: 390 mmeje z: 780 mmcono del husillo: A2-11 número de velocidades del husillo: 2000 rpm potencia del motor: 37 kWpeso de la máquina aprox.: 9000 kgdimensiones de la máquina aprox.: 1905,0 × 2720,0 × 3260,0 m

swing dia.: 440 mmmax. turning diameter: 220 mmturning length: 450 mmtravel -x axis: 200 mmcontrol: Fanuc 18i-TB max. helix angle: 60 °spindle bore: 64 mmtool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MSequipped with counter spindle and chip conveyor.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar material dia.: 75 mmmax. max. swing dia.: 540 mmturning length: 650 mmcontrol: FANUC Oi-TB machine weight ab.: 6.200 kgCNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Yequipped with chip conveyor.Additional equipment:+ C axis+ Y axis+ driven toolsThe machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. swing diameter over bed: 510 mmmax. turning diameter: 260 mmMax. Turning length: 540 mmtravel -x axis: 240 mmcenter height over bed: 260 mmcontrol: FANUC 21i-TB spindle bore: 77,5 mmno. of tools in turret: 12 xtool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8The machine is in good condition.Please refer to further technical details in the attachement of the offer.A machine video will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: T 8 | T-8The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.