tornos usadas para la venta (2,993)

control: Fanuc 31/32 i : 2 chucking diameter: 170 mmswing diameter: 210 mmx-travel: 400 mmz-travel: 200 mmlength: 2500 mmwidth: 1900 mmheight: 2300 mmweight: 5500 kgturning height: mmturning diameter: mmswing diameter: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75740 €: 1431.49 €: 600 mm: 1500 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 M: 3 : 20 - 100, 80 - 400, 400 - U/Min: max. 8 m/min: max. 8 m/min: 290 mm: 90 mm: 5 MK: 225 mm: 11 kW: 3,5 / 22 kW/Nm: 1,75 / 11 kW/Nm: 120 Nm: 1250 daN: 1050 daNFast and simple communication between the operator and the lathe.Simple workpieces are machined in the same way as on the universal lathe, but more efficient.Complicated workpieces are machined in the same way as on the universal lathe, but faster.Complicated workpieces are machined in the same way as on the CNC lathe, but easier.Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven softwareleads the operator also without programming skills simple and fast to the finished workpiece.The interface is simple and with large icons, which is convenient in a specific work environ ...

Auction-ID: A1-44708-8

turning diameter over bed: 1450 mmturning diameter over slide rest: 950 mmturning length: 4000 mmcentre height: 725 mmfaceplate diameter: 1000 mmtravel -x axis: 980 mmtravel -z axis: 4000 mmworkpiece weight: 2 toturning speed range: 1,5 - 1000 U/minspindle hollow: 500 mmControl: Siemens 828D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - m- CNC Control Siemens 828D- Front and Rear 1000mm dia. 4 – chucks- Tailstock- Chip Conveyor- Boring Bar 1500 mm x 120 mm- Boring Bar 1690 mm x 120 mm- Boring Bar 1000 mm x 80 mm- Boring Bar 1500 mm x 100 mm - Quantity of KM ToolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bed width: 350 mmturning length: 1.000 mmcontrol: Manual plus 620 Heidenhaingreates pass round over bed: 430 mmSwing dia. over traverse guideway: 220 mmMain spindle:: turning speed range - main spindle: 1 - 3.600 min/-1power capacity - main spindel: 9 / 11 kWmax. Torque: ca. 200 Nmspindle head: DIN 55027 / 6 spindle diameter in front bearing: 110 mmspindle bore: 80 mmusable bar diameter: max. 80 mmTool Mount:: System: MultiFix Shank diameter: 20 x 20 mmaxis stroke:: x-axis: 230 mmz-axis: ca. 1.000 mmTailstock:: diameter of quill: 70 mmquill stroke: 150 mmtaper of center: MK 5 steady: hollow: fix: 12 -150 mmhollow: var: 12 -125 mmfeeds:: rapid traverse: X: 10 / Z: 7 m/minfeed power: X: 4 / Z: 5 kNtotal power requirement: - kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 mDocuments: Tailstock: steady rest: 1x Coolantsystem: Multifix holder: 2x Lat ...

Auction-ID: A1-44708-14

Auction-ID: A1-44708-10

Auction-ID: A1-44708-20

Rango de velocidad de giro: 2,24 – 224 U/mínimo Potencia total requerida: 55 kWweight de la máquina, aprox. 16 diámetro de la placa frontal: 1250 mm - Diámetro de la placa frontal: 1,250 mm - Altura máxima sobre la placa de cimentación: 1,250 mm - Par máximo en la placa frontal: 31.500 Nm - Pieza de trabajo más grande: 16,000 Kg - Rango de velocidades: 2,24 - 224 rpm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

Auction-ID: A1-44708-15

Auction-ID: A1-44708-13

Auction-ID: A1-44708-7

Auction-ID: A1-44708-12

Auction-ID: A1-44708-16

Auction-ID: A1-44708-18

Auction-ID: A1-44708-5

Auction-ID: A1-44708-21

Auction-ID: A1-44708-9

turning diameter: 760 mmturning length: 1540 mmcontrol: Fanuc 31i-B total power requirement: 94,42 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mTurning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle.Condition: Very well preserved, machine comes from a company liquidation.Time recording:Control unit on: 13127 hoursRuntime: 3833 hoursProcessing time: 2835 hoursThe upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning.Fanuc 31i-B CNC controlSwing diameter over bed: 1000 mmMaximum turning diameter: 760 mmMaximum turning length: 1540 mmMaximum bar diameter (manual/continuous): 76/76 mmY-axis travel: 230 mm (±115 mm)Clamp (counter spindle)ASA interface: A2-8Spindle speed: 4000 rpmAC motor power (cont./30 ...

turning diameter: 313 mmturning length: 501 mmcontrol: Fanuc Oi-TD total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-TD cnc controlmain spindle: collet chuck devicesub spindle: collet chuck device12-fold revolver (BMT 55)C-axisY-axisdriven toolscoolant deviceTechnische Daten: / technical detailsSchwingdurchmesser / rotary diameter 707 mmDrehdurchmesser / turning diameter 313 mmDrehlänge / turning length 501 mmX-Weg / X-travel 196 mmZ-Weg / Z-travel 715 mmY-Weg / Y-travel -25,4 / +65 mmmax. Drehzahl Hauptspindel / max. spindle speed main spindle 5000 UpM /rpmmax. Drehzahl Gegenspindel / max. spindle speed sub spindle 5000 UpM /rpmAnzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mmAntriebsleistung Hauptspindel (30min)/ drive capac ...

Auction-ID: A1-44708-22

Datos técnicos Longitud máxima de giro: 1000mm Característica Valores típicos: Ø circulante sobre la cama aprox. 500 mmSobremarcha: ~8 m/min (X) · ~10 m/min (Z) Quill en la clavija: Ø 80 mm, impacto ~180 mm Conexión eléctrica: 3 fasesFusible principal: 25-80APotencia aparente nominal: 14-24-49 kVAElementos operativos importantes Botón de parada de emergencia para parada inmediata Arranque/parada del husillo y selección de velocidad Ajuste de ejes (X y Z) manualmente o mediante programa Selección de ciclos para control CNC MANUAL Inicio/parada de la pieza de alimentaciónCero puntos & Peso de viaje de referencia: aprox. 3.000 – 5.200 kg Auction-ID: A1-44739-2

Auction-ID: A1-44708-6

Auction-ID: A1-44708-3

Auction-ID: A1-44708-19

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ancho central aprox. 600 mm, con accesorios Auction-ID: A1-44702-144

diámetro de torneado sobre la cama: 160 mmDiámetro de giro sobre la corredera: 90 mmLongitud de torneado: 700 mmVelocidad del husillo: 85-2000 U/min. Estrecha MK: 3 diámetro del husillo: 30 mmPotencia total requerida: 2,2 kWweight de la máquina, aprox. 700 kgdimensiones de la máquina, aprox. 1800x800x1600 mm. Los datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

turning diameter: 356 mmturning length: 510 mmcontrol: M 730 BM total power requirement: 40 kVAweight of the machine ca.: 6,6 tdimensions of the machine ca.: mCNC control:Mitsubishi 730 BMMain spindle:Speed: 5000 rpmPower: 15/11 kW (15% duty cycle / constant)Bar diameter: 65 mmSub spindle:Speed: 6000 rpmPower: 11/7.5 kW (25% duty cycle / constant)Turret:12 stationsTool spindle speed: 10000 rpmPower: 5.5/3.7 kW (5 minutes / constant)Y-axis travel: +/- 50 mmEquipment:Machine with gantry loader:Left-hand installation, 14-station storage, 20-pallet workpiece storage,Double gripper conveyor3-jaw hydraulic KITAGAWA power chuck, 210 mm diameterHigh/low pressure chuck system for main and counter spindlesMABEO high-pressure pump with 1.5 MPa filter unitCoolant gunCoolant sprayer on the chuck for main and counter spindlesCoolant sprayer for the machine bed claddingOil mist separatorHinged belt c ...