otras máquinas para el procesado de metales usadas para la venta (10,780)

Wire diameter: 0.4-1.5mm, control: MCS SYSTEM V, an on-site inspection is possible.

Tipo de máquina: Lavadora de piezas Fabricante: Bio Circle Tipo: HTW II 1000 IS Año de fabricación: 2015 Estado: usado / muy bueno, casi no usado ¡La oferta solo se enviará si se proporciona una impresión completa! Precio 6.500 euros incluyendo 19% de IVA Ubicación Warstein, Alemania Número de referencia M-BIO-0926 DESCRIPCIÓN Te ofrecemos una lavadora de piezas usadas del fabricante BIO-CIRCLE Diámetro de la cesta 975mm Carga útil 250kg Transmisión por cesta y calefacción. Ventilador de extracción Ver la última imagen para más datos. Disponibilidad: inmediata Nuestra oferta está dirigida a los trabajadores registrados en el sentido de la Ley de Regulación Comercial según el §14 GewO. La oferta está sujeta a cambios, sujeta a venta previa. Por favor, proporciona tus datos de contacto completos para recibir una oferta con  ...

This KEYENCE Agilista-3200W was manufactured in 2016. It includes Modeling Studio software, printer setup materials, side covers, and an AC power cable. Ideal for those looking to enhance their 3D printing capabilities. Contact us for more information.

This 5-axis AGIE Progress 3 wire EDM machine was manufactured in 2006. It features travel paths of 500 x 350 x 430 mm and a maximum workpiece weight of 800 kg. The machine is equipped with the AGIE Vision control unit and includes various near-new clamping systems and a wire alignment device. If you are looking to get high-quality erosion capabilities, consider the AGIE Progress 3 wire EDM machine we have for sale. Contact us for further details.

Horno de secado por convección Heraeus UT 6060 300°C – 52 L Horno de calefacción y secado con circulación forzada de aire (aire circulante). Para procesos precisos de tratamiento térmico y térmicos Pruebas de materiales hasta 300 °C. Proporciona una distribución precisa y uniforme de la temperatura, así como la adhesión exacta a la temperatura seleccionada. Fabricante Heraeus (marca Thermo Fisher Scientific). Fabricado en Alemania. Volumen interior: 52 L Rango de temperatura de hasta 300 ºC Dimensiones de la carcasa exterior (Ancho x Diámetro Longitudinal): 744 x 552 x 535 mm Dimensiones interior de la carcasa (Ancho x Ancho x Diámetro Má): 403 x 380 x 370/339 mm Peso (vacío): 53 kg 230 V. 50/60 Hz. 7,1 A. 1,64 kW. Equipamiento: Controlador de temperatura con pantalla digital (kelvitron t) Protección contra sobretemperatura e insuficiente Válvu ...

Number of guide tubes: 3, mains connection: 380V, 3-phase, frequency: 50Hz, control voltage: 24VDC, rated current / FLA: 5A, an on-site inspection is possible, not connected to power.

X-axis: 525mm, Y-axis: 400mm, Z-axis: 450mm, Y-axis at electrode change and loading position: 675mm, internal dimensions of working tank: 750x650x420mm, max. dielectric level: 375mm, max. head load: 100kg, distance from tool carrier plate to worktable: 135-585mm, integrated C-axis speed, adjustable: 1-20rpm, measuring resolution: 0.001°, load capacity with manual electrode change: 50kg, load capacity with automatic electrode change: 15kg, support surface: 730x630mm, worktable load capacity: 1,000kg, connected load: 7kVA, fuse protection: 25A, length: 2900mm, width: 2200mm, height: 2653mm, machine weight: 4.4t, generator weight: 200kg, with documentation, C-axis, EW20 electrode changer, TAE M10 cooling unit, CO2 fire extinguishing system, 4µm filter system, locators, MultiProg software, an on-site inspection is possible.

X-axis: 570mm, Y-axis: 370mm, Z-axis: 350mm, working area dimensions: 1050x720mm, U/V-axes: 120x120mm, taper angle: ±20°, max. workpiece dimensions: 770x520x340mm, max. workpiece weight: 1t, wire diameter: 0.15-0.3mm, wire tension: 3-23N, max. wire feed: 420mm/s, floor-to-table distance: 995mm, dielectric tank external dimensions: 725x2550mm, weight empty: 600kg, capacity: 800l, connected load: 15kVA, control: Sodick LQ33W, length: 2600mm, width: 2740mm, height: 2390mm, machine footprint: 3700x3900mm, machine weight: 4.6t, cutting time: 13,775h, machine-on time: 62,484h, with Super-Pika, wire chopper, SMS box with wall-mounted enclosure, an on-site inspection is possible.

Niederberger con dos estaciones de la máquina de molienda de superficie NCS-P2/2. Longitud de la correa 6300mm y ancho de cinturón 200mm. Año de construcción: 1979. Voltaje de conexión 400V. Velocidad de transporte ajustable. Dispositivo de magnetización final y dos discos magnéticos de 2003.

Display: microset DPS, an on-site inspection is possible, without power.

Optical measurement machine manufactured in 2022. This ZEISS ATOS Q 12M features dual 12-megapixel CMOS cameras with a resolution of 4112 x 3008 pixels. It includes multiple measurement volumes, with the largest measuring 500 x 370 x 320 mm. The system operates efficiently with a maximum rotary table load capacity of 150 kg. If you are looking to get high-quality optical measurement capabilities, consider the ZEISS ATOS Q 12M machine we have for sale. Contact us for further details.

Consisting of various welding machines, a bending machine, an extraction system, and further accessories.Attention: Condition of the devices unknown, probably mostly used as a spare parts storage!

Content consisting of various parallel blocks, measuring equipment, an incomplete gauge block set

Content consisting of reamers, twist drills, clamping jaws, turning tools, plus four Multifix tool holders.

Technical data to follow! Currently no TÜV, in need of repair for approx. 2000 EUR.Additional technical specifications:• Loading area: 4000 x 2000 mm

Content consisting of clamping devices and various hand tools

Oferta 26206 Datos técnicos: - 2 Salas de voladura - Ancho de sala de voladura / profundidad de sala de explosión 600 / 940 mm cada una - Acceso a la pieza de trabajo por puertas laterales - 2 ventanas de visión articuladas 400 x 250 mm - 2 piezas de cañones de detonación - 2 piezas E. pedal - Recuperación de material de voladura - Sistema de desempolvado con filtro de cartucho - Potencia de 400 V / 3 kW - Conexión neumática de 6 bar - Requisito de espacio aprox. A: 1500 x Alto 2200 x Diámetro 1600 mm - Peso aprox. 350 kg

Incl. refrigerated air dryer from the manufacturer AIRCRAFT.

Consisting of four clamping units with a jaw width of 125 mm each.Attention: without the pallet seen in the photos.

Consisting of four clamping units with a jaw width of 125 mm each.Attention: without the pallet shown in the photos.

ROLEI Deburring MachineManufacturerROLEIConditionuntestedLocation72589 Westerheim DELot64

Consisting of 7 parts, with two micrometers, measuring range: from 20 to 40 mm, incl. setting rings

Tischabmessungen: 960 x 120 mm

With double clamping function.

Content consisting of an attached vise, jaw width: 125 mm as well as a digital caliper, standard calipers, tool holders, hand tools, matching lot 27

With double clamping function

Hydraulic machine vise with double clamping function

KUNZ Deburring MachineManufacturerKUNZConditionuntestedLocation35614 Aßlar DELot87

Contents consisting of digital calipers, a HAINBUCH clamping system, VDI 40 tool holders, hand tools, HAINBUCH collets

Attention: without the pallet seen in the photos.• Consisting of four clamping units• jaw width each: 125 mm