otras máquinas para el procesado de metales usadas para la venta (10,784)

StrikoWestofen Westomat 1200 PlusYear of manuf. : 2015 Control : Bedienpult ____________Description:General:Manufacturer:StrikoWestofen GmbHType:Westomat® 1200 Plus+ AYear of construction:2015Operating voltage:400 V / 50 Hz (3Ph/PE/N)CE:built according to Machinery Directive 2006/42/ECWeight:4,947 kg netFurnace / Heating:Design:Resistance-heated holding furnaceRefractory:Special grade, specially driedHeating:1 set of heating elementsMelt temperature measurement:Double thermocouple with SiC:protection tubeFurnace chamber measurement:ThermocoupleDosing system:Riser tube:complete, flanged 50/21Dosing control:ProDos® 3Biscuit correction:DISPO 35Pouring launder:YesControl / Electrics:Measuring, switching and control unit:Control cabinet with plug:connectionTemperature control:Melt and furnace chamberHeating power switching:YesInterface:Signal interface to casting machineOperator panel ...

Machine vice, sturdy vice, drill press vice -Machine vice: FZA-120 -Clamping jaws 125 x 40 mm -Clamping depth: 160 mm -Dimensions: 415/230/H85 mm -Weight: 15 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft attachment jaw set -Width: 40 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/120/H55 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Schunk, soft, helical toothed jaws = 3 pieces -Type: SFA- 315 -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/105/H95 mm -Weight: 7.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 115/90/H80 mm -Total weight: 4.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Bilz, Thread cutting chuck MK3 mount -Type: DSPL 3 -Cutting range: M 9 - M 24 -Bore: Ø 19 mm -Dimensions: Ø 92 x 282 mm -Weight: 5.4 kg

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK40 chuck -Shaft: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 58 x 365 mm -Weight: 2.3 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, cutter, circle cutter -Manufacturer: Marchner, die cutter, boring head, circle cutter -Recording: MK5 -Diameter range: 105 - 160 mm -Puncture depth: 30 mm -Transport dimensions: 430/200/H120 mm -Weight: 9.6 kg

General2 spindles automatic lathe - 2 cross slides - Spindle and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Tape unloading workpiece; Control: Fanuc 32i Working areaBar diameter max.32 mmChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner J9 and bush-spindle syncronism Additional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machinin Counter spindle collet cleaningCounter spindle collet cleaning with coolant Spindle liner for main spindleSpindle liner tube  ...

Key data: 300 mm

Datos técnicos: Fabricante: Speroni Tipo: STP 35 Año de fabricación: 2007 Eje Z del rango de medición: máximo 400 mm Rango de medición en el eje X: máximo 300 mm Repetibilidad: +/- 2 μm Dimensiones y peso Peso: 150 kg Estado Condición: Usada Funcional: Probado y totalmente funcional

Key data: 210 mm

Datos técnicos: Fabricante: Zoller Tipo: VSM400-00448 Año de fabricación: 2004 Eje Z del rango de medición: 400 mm Rango de medición en el eje X: 210 mm Diámetro máximo de la herramienta: 420 mm Repetibilidad: +/- 0,002 mm Potencia: < 1.000 VA Dimensiones y peso Peso: aprox. 123 kg Estado Condición: Usada Funcional: Probado y totalmente funcional

Offered is a continuous-feed deburring machine with brush rollers and a separate extraction and dust separation system. Equipped with conveyor belt, brushing units, manual adjustment handwheels, feed rate controller, control panel and emergency stop switch. Inspection possible by appointment.

Máquina neumática de ajuste a presión CIP-8P Datos técnicos: Fuerza de presión 80 nudos, aprox. 8 toneladas Ajuste de fuerza mediante pantalla, precisión 1 kg Aire comprimido 8 bar, mínimo 150 l/min Diámetro de la herramienta y el vástago: longitud total 37 o 76 mm, de los cuales 15 mm en el portaherramientas, Ø 12,7 mm Compatibilidad: También se pueden utilizar herramientas de otros fabricantes Dimensiones externas (L × W × H) y peso: 650 × 2.300 × 1.100 mm, 400 kg Garantía: 36 meses después de la entrega

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 42 mm -Max. height: 55 mm -Dimensions: Ø 48/42 mm -Submission/Price: complete -Transport dimensions: 96/42/H42 mm -Total weight: 1.0 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 50 mm -Max. height: 70 mm -Dimensions: Ø 50/50 mm -Submission/Price: complete -Transport dimensions: 100/50/H50 mm -Total weight: 1.2 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 4 pieces, for machine tools and systems -Minimum height: 70 mm -Max. height: 102 mm -Dimensions: Ø 48/70 mm -Submission/Price: complete -Transport dimensions: 96/96/H70 mm -Total weight: 3.2 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Screw stand: Fixator for machine tools and systems, 1 piece -Minimum height: 215 mm -Max. height: 295 mm -Dimensions: Ø 100 x 215 mm -Weight: 12 kg

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: Spur gear, helical teeth -Gear: Diameter Ø 170 mm / 31 teeth -Shaft mounting: Inner Ø 50 x 70 mm -Quantity: 1x gear shaft available -Overall dimensions: Ø 170 x 70 mm -Weight: 7.2 kg

con mesa de medición, dimensiones: 6000 x 3000 mm, peso sobre la mesa: aprox. 13.500 kg, sonda táctil, Fabr. RENISHAW

Con mesa de medición, tamaño: aprox. 3000 x 2000 mm, peso sobre la mesa: aprox. 4.500 kg

con mesa de medición, tamaño: aprox. 6000 x 2000 mm, peso sobre la mesa: aprox. 9.000 kg

This 3-axis ZEISS ACCURA 16/24/10 3D CMM was manufactured in 2022. It features a measuring range of 1,600 mm in the X-axis, 2,400 mm in the Y-axis, and 1,000 mm in the Z-axis, with a maximum workpiece weight capacity of 4,000 kg. Equipped with the ZEISS VAST Scanning Head, it offers high-speed data acquisition and sub-micron accuracy. If you are looking to get high-quality measurement capabilities, consider the ZEISS ACCURA 16/24/10 machine we have for sale. Contact us for further details.

A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible.

A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible.

A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible.