máquinas rectificadoras usadas para la venta (2,374)

Rectificadora de banda larga TIPO: LZG-M-1 Tamaño de la mesa 2500 x 1000 mm con control de velocidad •Para rectificar, matear y pulir acero Velocidad de la banda: 5-30 m/s infinitamente ajustable electrónicamente mediante potenciómetro Ajuste de altura de la mesa eléctrico y sin mantenimiento; Rango de ajuste: 350 mm Área de trabajo: 2300 x 1000 mm Dimensiones de la correa: 6800x150 mm Potencia del motor de la banda de lijado: 5,5 kW Carga máxima de la mesa: 200 kg Estructura de mesa de acero con listones de madera; Incluye tope de pieza ajustable Guía de mesa mediante eje guía endurecido y rectificado Rodamientos de bolas de 35 mm y 6 vías a cada lado Dimensiones de la almohadilla de lijado: 320x350 mm Panel de control central y claro Proyección de columna grande de un lado: 1000x350 mm Incluye iluminación de piezas de trabajo Campana de extracción pl ...

Amoladora de banco doble, Fabr. Cordes & Sluiter, Tipo DOT-300 -Potencia del motor 0,85 kW -Velocidad 1400 rpm -muelas abrasivas máximas Ø 300 x 40 mm -Voltaje de funcionamiento 380 voltios

1 gebr. Rectificadora de acero, Fabr. Sólido, tipo DSCD

gebr. Amoladora de banco doble Fabr. Grifo Diámetro 200 mm Revoluciones 3.000 rpm.

An Amada CNC 5-axis profile grinding center including an extraction and filtration unit is available. Travel X/Y/Z: 300mm/250mm/88mm, rapid traverse X/Y: 2000mm/min, rapid traverse Z: 500mm/min, max. workpiece diameter: 80mm, max. workpiece weight: 4kg, chuck diameter: 150mm, positioning resolution: 0.0001mm, positioning accuracy X/Y: +/-0.05µm, repeatability: +/-0.2µm, rotary table: 360°, rotary table resolution: 0.0001°. Grinding wheel dimensions X/Y/Z: 75mm-100mm/4mm-6mm/22.23mm, spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 1650mm/2100mm/1750mm, weight: approx. 4000kg, control: Fanuc Series 32i-B. Including Amada Wasino TWCE extraction and filtration unit. Documentation available. An on-site inspection is possible. The machine is located in China.

Rectificadora Graver Marca: Tapa Modelo: S0 Construido en 1994

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg

gebr. Lijadora de banda, Fabr. Formato, tipo BS 75 Construido en 1999 Ancho de rectificado 75 mm con varias bandas abrasivas

1 gebr. Rectificadora cilíndrica, Fabr. Cincinnati, Tipo R 75, Construido en 1971 Altura de la punta 130 mm Longitud de rectificado 760 mm Orificio del husillo 38 mm Diámetro de la muela 300 mm, ancho 40 mm Peso de la pieza 75 kg. Máximo. El husillo de rectificado se puede girar dos veces

Thiel Produro 115 Archivador - Carrera y velocidad infinitamente variables ajustables - Carrera 40-120 mm - Velocidad 60-300 min - Giro de la mesa 15° - Peso aprox. 500 kg

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Construido en 1997 Área de molienda 600x350 Peso: aprox. 2.600 kg

A Saacke CNC tool grinding machine including a Felsomat tool loader is available. Center height: 170mm, travel X: 580mm, feed X: 20m/min, table dimensions X/Y: 980mm/185mm, travel Z: 250mm, feed Z: 20m/min, travel Y: 250mm, feed Y: 10m/min. B-axis horizontal swivel: 240°, swivel speed: 120°/s, motor spindle diameter: 170mm, speed: 10000rpm, torque: 10.7Nm. Tool positions: 24, tool holder: HSK-C50, A-axis indexing accuracy: +/-15°, error at 100mm diameter: 8µm, workpiece holder: ISO 50, speed: 50rpm. Control: NUMROTOplus V.3.8.3m, resolution X/Y/Z: 0.0001mm, resolution A/B: 0.0001°. Includes Felsomat Robotal RE 01 loading unit with rotary indexing table, FB703 small extinguishing system, and Brinkmann FBS-238/50 screw spindle pump. Documentation available. An on-site inspection is possible.

A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.

Por la presente le hago la siguiente oferta: Rectificadora automática B1 Control CNC de 4 ejes para 2 unidades de rectificado + eje NC para el almacenado. El tiempo de producción se reduce a la mitad con las 2 unidades de molienda. Es una máquina nueva que solo se utilizó para demostraciones experimentales. Año de fabricación: 2005 Rango de trabajo: aprox. 30 - 200 mm de diámetro Al convertir las campanas de sujeción en un mandril, esto máquina también se pueden procesar piezas de metal y cerámica.

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

Key data: 19 mm

¡Por favor pregunte por más detalles!

Este Chevalier FSG 1640 AD III se fabrica en el año 2015. Cuenta con una longitud de rectificado de 1000 mm, una altura de 370 mm y un tamaño de placa magnética de 1000 x 400 mm. La muela mide 355 x 30 x 127 mm con una velocidad de 1750 rpm. Con un peso aproximado de 3500 kg, sus dimensiones son 4000 x 1730 x 1930 mm. Contáctenos para obtener más información sobre esta máquina.

workpiece diameter: 350 mmworkpiece weight: 99999999 kgworkpiece height: 240 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 2 tdimensions of the machine ca.: mSeltene Gelegenheit:Teilüberholte Hochpräzisions-RundtischflachschleifmaschineMit komplett neuem Schaltschrank und neuer Steuerung mitBEMA SchleifsoftwareRundtisch-Durchmesser 380mmMagnet-Durchmesser 350mmSchleifscheibenabmaße 300x25x76,2mmTischdrehzahl variabel max. 200U/minSchwenkwinkel des Tisches +-3 GradSchleifspindeldrehzahl 800-4200 U/minLeistung Schleifspindelantrieb 5KWVerfahrweg quer max. 225mmVerfahrweg vertikal max. 480mmAbstand zwischen Magnetspannfutterund Spindelmitte, max. 390mmAutomatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifsc ...

Proceso: rectificado por inmersión sin centros, diámetro máximo de la pieza: 20 mm, longitud máxima de la pieza: 80 mm, sin automatización mediante recipiente vibratorio. Es posible realizar una inspección in situ.

grinding diameter: 360 mmgrinding length: 1000 mmcentre height: 180 mmmax. workpiece weight between centres: 250 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine mit sehr wenigen Betriebsstunden nach Überholungbeim Karstens Fachbetrieb.Zustellsteuerung JetterDigitalanzeigeInnenschleifvorrichtungReitstock mit ZylindrizitätsfeinverstellungHydraulische ReitstockpinoleEtc...Luftkissenschnellverstellung SchleifspindelstockThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 1000 mmmin. workpiece diameter-at internal hobbing: 100-500 mmworkpiece length - max.: 500 mmcontrol: Siemens Sinumerik 840 D swing dia.: 1250 mmWorkpiece spindle flange diameter: 520 mmwork piece spindle speed range: 0-440 U/minweight of the machine ca.: 25 tdimensions of the machine ca.: 5100 x 3034 x 4500 mmTable travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mmTable speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axisEquipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentationThe data fo ...

grinding diameter - cylindrical: max. 650 mmgrinding diameter - internal: max. 600 mmcontrol: Siemens Sinumerik 840 D internal grinding depth: max. 600 mmExternal grinding length: max. 600 mmworkpiece length - max.: 380 mmturning speed range - stepless: 1-795 U/minWorkpiece spindle unit (U/B1/L adjustment): -Travel (U axis) 300 mm -Swivel angle (B1 axis) -1°/+12° -Speed range (infinitely variable) 1-795 rpm -Setup speed (tapping) 10 rpm -Spindle head size A 8 according to DIN 55026 -Through bore 58.5 mm -Workpiece diameter max. 830 mm -Workpiece length max. 600 mm -Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): -Travel (Z1 axis) 800 mm -Travel (X1 axis) 150 mm -Swivel angle (B2 axis) 270° -Drive power of internal grinding spindles (infinitely variable) 7.5 kW -Grinding block mounting bore (diameter) 100 mm - ...

Recorrido X 420 mm YWeg 270 mm Tamaño de la mesa 254 x 482 mm Proyección 254 / 318 mm Velocidades del husillo de rectificado 12 - 60.000 rpm Carrera del husillo 92 mm Velocidades del husillo 90, 136, 184, 280 rpm Velocidad de carrera, ajustable 2 - 120 carreras a 51 mm Precisión 1,25 μm a 30 mm Conexión de aire comprimido 7 bar Peso de la máquina aprox. 1700 kg Dimensiones aprox. 1,45 x 1,2 x 2,4 m

Longitud de rectificado: 500 mmAncho de rectificado: 200 mmAltura de la pieza: 300 mmPotencia total: 3 kWPeso de la máquina aprox.: 1,6 tDimensiones de la máquina aprox.: 2,621,7 mPaquete 5 x JUNG HF 50 EXW cerca de FrankfurtLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

diámetro interior: 150 mmprofundidad de rectificado: 200 mmcarrera de la mesa: 425 mmdiámetro: 80 mmvelocidad del husillo: 17000 U / minvelocidades de torneadode la pieza: 125/176/246/350 U/minmax. Diámetro de giro: 250 / 420 mmPotencia total requerida: 2,2 / 0,5 / 0,9 kWpeso de la máquina aprox.: 2 tDimensiones de la máquina aprox.: 2,40 x 1,20 x 1,45 mLos datos de este anuncio se crearon con ModulMWS, la solución de software de LogoTech oHG.

width of the strips: 150 mmband length: 2000 mmband speed: 14.5 + 29 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4.0 kW 100% EDweight: 84.0 kgrange L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steelproperties- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the Sanding beltscope of delivery- Sanding belt K 80- Hinged protec ...

width of the strips: 75.0 mmband length: 2000 mmband speed: 30.0 m/sekgrinding width: 500 Plantisch mmsuction capacity: 630 m³/htotal power requirement: 3.75 kWweight of the machine ca.: 90.0 kgrange L-W-H: 1100 x 550 x 1035 mmFurnishing :- High quality construction- The drive roller is crowned- This automatically centers the sanding belt in the middle of the roll- Fully vulcanized contact roller for the longest service life and the best possible smoothness- Tool-free and therefore faster, uncomplicated change of the sanding belt- Stepless height adjustment- for optimal adjustment of the belt sander to the user- Freely adjustable metal stop- for the optimal and safe guidance of workpieces Use of the large surface grinding area- Belt speed structurally optimized- thus a burning of the workpiece during processing can be largely excluded- Extraction equipped with robust and flexible suc ...

width of the strips: 150 mmband length: 2000 mmband speed: 1400 / 2800 U/mintube diameter: 40 - 140 mmvoltage: 380 Vtotal power requirement: 3.0 kWweight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request- Machine video - identical machine -https://www.youtube.com/watch?v=LXP09NFTnlw&t=1sThe FALKEN PN 38/140 is a multifunctionalgrinding machine for grinding pipe and profile endsEquipment:- robust electro-motor pipe profile grinding machine- enables notches up to an angle of 50°- large-dimensioned surface grinding surface with protective cover- 2x belt speeds- control panel, front left - including emergency stop button- grinding belt can be replaced quickly and easily- vice movement to the right - left, forwards & backwards possible- side grinding dust collection container- horizontal & vertical grinding alig ...

tube diameter: 16.0 - 90.0 mmwidth of the strips: 100 mmband length: 1250 mmgrinding band dimension: 100 x 1250 mmtotal power requirement: 2.2 kWweight of the machine ca.: 180 kg.range L-W-H: 1200 x 600 x 1150 mmThe TUGRA TT 90 is a grinding machine forgrinding pipe and profile ends on the front.Equipment:- electro-motor grinding machine for pipe and profile ends- 10x grinding rollers included in delivery incl. storage area - rear of the machine- easy manual clamping/opening of the material- lateral adjustment of the material clamping system- grinding up to 50° degrees possible- machine base- collecting tray for easy emptying of grinding dust- EMERGENCY OFF button at the front- front privacy screen made of plexiglass- side transport bags for easy transportThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.