máquinas rectificadoras usadas para la venta (2,181)

grinding diameter:300 mmgrinding length:540 mmcentre height:175 mmtotal power requirement:20 kVAcentre distance:1000 mm

grinding diameter:50 mmgrinding length:100 mmcentre height:100 mmcentre distance:200 mm

internal diameter:140 mmtotal power requirement:5,5 kWweight of the machine ca.:1,8 tdimensions of the machine ca.:2,8 x 2,5 mmax. workpiece weight:15 kgclamping dia. max.:140 mmclamping length:250 mmmax. bore diameter to be ground:0,8-90 mmmin./max. hole to grind:160 mmcentre height:90 mmworkpiece spindle stepless:112-1000 U/min

dimensions of the machine ca.:3,5 x 2,0 x 2,5 m

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: 350 mm: 300 mm: 500x160 mm: 350x150 mm: 300x150x55 mm: 2800 1/min: 3,6 kW: 1020 mm: 820 mm: 2170 mm: 440 kg: Dm. 200x78x78 mmThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric s ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: Dm. 200x78x78 mm: 2800 1/min: 300 mm: 300x150x55 mm: 350x150 mm: 500x160 mm: 3.6 kW: 1020 mm: 820 mm: 2170 mm: 440 kgThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric stability ...

grinding diameter:5-55 mmgrinding length:500 mmtotal power requirement:44 kW-- Intended use and general information --Fully automated external and surface grinding of synchronous ringsCentre height: 200 mmGrinding length: 500 mmGrinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mmDrive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µmWorkpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-DMachine weight: 7,000 kgCentre height: 200 mmGrinding length: 500 mm

grinding diameter:200 mmgrinding length:320 mmtotal power requirement:3,5 kWweight of the machine ca.:9 tspace required L x W X H:5,28 x 4,5 x 2,4 mmax. wheel dia.:200 mmSpindle drives Arena SiemensFor Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm

max. grinding diameter:160 mmstations:2 sanding width:30 mmtotal power requirement:0,37 kWweight of the machine ca.:100 kgdimensions of the machine ca.:520 x 520 x 1160 mm

no. of working stations:1 Stücktool adaptor:1650 W revolutions per minute:2990 U/mintotal power requirement:380V, 2,7 Aweight of the machine ca.:33 kg

no. of working stations:1 Stücktool adaptor:1650 W revolutions per minute:2990 U/mintotal power requirement:380V, 2,7 Aweight of the machine ca.:33 kg

working width:1400 mmWorkpiece thickness max.: 80 mmwork height max.:1000 mmFeed speed:4m/min I Stufe, 8 II Stuf m/min.Required air-pressure:max. 5 barvoltage:50 Hz, 380 Vworkpiece length:320 mmworkpiece thickness min.:1 mmweight of the machine ca.:3500 kgDocuments:vorhanden

workpiece length:350 mmwork piece width:150 mmdiameter:Tellerradius 200 mmtool taper:M32 x 1,5 spindle diameter:32 mmgrinding width:max.450 mmturning speeds:3385 U/minwork table::Höhe 1000 mmworkpiece height max.:100 mmtotal power requirement:1,1 kWweight of the machine ca.:300 kgdimensions of the machine ca.:700 x 800 x 1170 mm

table diameter:520 x 22 mmtable - swivable:45 Gradtotal power requirement:1,6 kWweight of the machine ca.:130 kgdimensions of the machine ca.:520 x 520 x 1200 mmmit SchleifzylinderZubehör: 4 ( Aluzylinder) Werkzeuge zur Aufnahme von SchleifmittelnØ 50, 70 , 90, 120 mm x 223 mmneuer Motor

sanding belt length:max. 470 mmworkpiece dia.:600 mmtable - swivable:0 - 6 Gradtaper:Reitstock Morse 2 turning speed range::1260 - 3100 U/mintable movement:längs 470 mmtool taper:schwenkbar 0-6 °, 90° dre total power requirement:0,4 kWweight of the machine ca.:950 kgdimensions of the machine ca.:1100 x 1100 x 1500 mmDocuments:vorhanden

max. grinding diameter:50 mmgrinding length:250 mmworkpiece length:300 mmtotal power requirement:0,7 kWweight of the machine ca.:330 kgdimensions of the machine ca.:1000 x 1000 x 1400 mm

grinding length:600 mmgrinding width:250 mmworkpiece height:380 mm:Sinumerik max. dia. of grinding wheel:300 mmweight:4000 kgtotal power requirement:12,5 kWgrinding wheels:Ø 400 mmmax. width of grinding wheel:100 mmgrinding wheel hole diameter:127 mmturning speeds:470 - 12030 1/minx-axis:600 mmy-axis:300 mmz-axis:250 mmgrinding range:450 x 200 mmdistance spindle nose and table:500 mmtable load:250 kgdimensions of the machine ca.:2600 x 2100 x 2400 mmswitchgear cabinet:1300 x 800 x 2000 mmhydraulical unit::450 x 350 x 500 mmDocuments:vorhanden

grinding length:1250 mmgrinding width:400 mmworkpiece height:550 mmworkpiece weight:750 kgtable-size:1720 x 400 mmmagnetic clamping plate:1250 x 400 mmdist. center of grinding spindle - table:750 mmturning speed range - grinding wheel:3000 U/minLength movement of the table:1300 mmgrinding wheel size:Ø 400 x 50 x 127 mmswitchgear cabinet:inkl. hydraulic power unit:inkl. coolant:inkl. voltage:380 Vtable load:max. 1100 total power requirement:13,8 kWweight of the machine ca.:6000 kgdimensions of the machine ca.:5000 x 3400 x 2400 mmDocuments:inkl.

internal diameter:315 mmgrinding depth:315 mmswing diameter:420 mmnumber of spindle speeds:32 - 360 U-minwheel box:-drehzahl 100 - 8000 U/minface diameter:500 mmtotal power requirement:12 kWweight of the machine ca.:5900 kgdimensions of the machine ca.:3400 x 1750 x 2000 mm

total power requirement:10,5 kWweight of the machine ca.:4800 kgdimensions of the machine ca.:3000 x 2100 x 2000 mmcentre distance:1200 mmHeight of centres:200 mmgrinding-table stroke max.:X -Achse 1000 mmtable-size:2060 x350 mmz-axis:Querhub 250 mmFeed speed:0,005 - 5 m/min.grinding head - swivable:360 °taper ISO:50 control:Sinumerik System 8 Documents:vorhanden

grinding length:1000 mmgrinding width:250 mmworkpiece height:400 mmtotal power requirement:12 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3.300 x 1.800 x 2.300 mmhydraulic power unit:400 x1000 x 1500 mmcontrol cabinet:2 Stück, 1000 x 1400 x 1500 mm

grinding length:150 mmtotal power requirement:3 x 380 /220 Vweight of the machine ca.:2100 kgdimensions of the machine ca.:1200 x 1700 x 2000 mmgrinding wheel diameter:280 - 350 mmgrinding wheel width max.:20 mmworkpiece diameter:65 - 120 mmworkpiece turning speeds:1,5 -20 U/minDocuments:vorhanden

grinding diameter: 630 mmgrinding length: 3000 mmcentre height: 315 mmgrinding wheel size: 750 x 100 x 305 mmgrinding wheel width: 150 taper: MK 6 chuck diameter: 315 mmgrinding head swivelling: 90 Gradgrinding spindle head - swivable: 30 °table - swivable: 4,30 - 6,30 Gradgrinding spindle speed: 815 / 935 U/minspindle speeds: 8 - 57 / 28 - 150 mmgrinding sp.stock-cross tvl. frwd/rear/total: 420 mmgrinding head quick motion: 80 mmtable speed -stepless-: 0,05 - 4,5 m/minworkpiece weight: 1200 kggrinding spindle drive: 22 kWControl: Siemens 840D total power requirement: 56 kVAweight of the machine ca.: 13 tdimensions of the machine ca.: 9900×2980×1875 mmThe machine is suitable for grinding cylindrical and conical workpieces usinglongitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are hydraulically oper ...

Datos generales Marca: CASAS Fabricante: Henri Hauser AG, Biel, Suiza Tipo: 3.S.M. Tipo de máquina: Máquina de molienda por coordenadas Número de serie: 51 Máquina nº: 407-542 Control/Pantalla: Pantalla digital de Heidenhain Ejes de pantalla: X / Y Datos técnicos Área de trabajo: 550 x 320 mm Rango de ajuste de la mesa: 400 x 250 mm Carrera vertical del deslizamiento: 400 mm Distancia máxima desde el husillo hasta la mesa: 470 mm Muela de rectificado Ø máx.: aprox. 100 mm Diámetro de rectificado con placa intermedia: 190 mm Ángulo máximo incluido durante el rectificado cónico: 3° Cabeza de rectificado Husillo de rectificado de carrera vertical: variable infinita de 5 a 90 mm Velocidad de elevación: 1,80 m/min Velocidad de movimiento planetario: aprox. 10 – 300 rpm, variable infinitamente Número de velocidades de rectificado del husillo: 12 Velocidad de rectificado de ...

Auction-ID: A1-47084-23

En su caja original. Nunca usada. Tamaño de la caja: 76 x 52 x 49 Auction-ID: A1-46992-10100

Presión máxima 125 Psi, fuente de alimentación de 10 W, NUNCA UTILIZADA. Dimensiones totales: 900 x 600 x 1500 mm Peso: 50 kg Auction-ID: A7-47248-297

Auction-ID: A7-46939-9

Auction-ID: A7-46939-99

Datos técnicos Fabricante: K. Jung GmbH Modelo: HF 50 RD Máquina de rectificado de superficie de mesa larga Año de fabricación: 1967 Número de fábrica: 4473 Longitud de rectificado: 500 mm Ancho de rectificado: 200 mm Área de sujeción: 600 x 200 mm Ajuste transversal: 230 mm Muela de rectificado: 225 x 20 x 51 mm Velocidad de rectificado del husillo: 1000 – 4000 rpm Voltaje: 380 V / 50 Hz Peso de la máquina: aprox. 1500 kg Espacio requerido: 2,6 x 1,45 x 1,65 m Configuración Placa de sujeción magnética 450 x 175 mm Pantalla digital HEIDENHAIN Equipos de refrigerante disponibles Dispositivo de extracción/filtro disponible Diversas herramientas de sujeción y ajuste Herramienta de medición/vestido en una caja de madera Documentos operativos y documentación disponibles Auction-ID: A7-46939-102