máquinas de goma usadas para la venta (406)

Mezclador interno tipo Thyssen Krupp GK270NC Banbury, 4 rotores tangenciales de alas, Año de fabricación: 2003 ¡La última cámara de diseño continental! Tolva hidráulica + paquete de potencia. Cuerpo y tolva sólo en buen estado. La caja de cambios y el motor de unidrive se pueden citar si es necesario (los mismos centros que 11D o F270).

Farrel Pomini Modelo OOC Lab Banbury Mezclador Interno número de máquina: 7511, Año: 1976 Volumen neto: 4,24 litros tolva neumática Motor de velocidad variable de 30kW DC. Completo con panel de control etc y en muy buen estado.

Extrusor de volcado Francis Shaw 18/22, Alimentación de crammer Longitud del tornillo 9ft 6o. Confianza 400hp D.C., 1150 r.p.m., 480 voltios. Hopper grande / Chute al siguiente nivel del piso.

Unidad extrusora dúplex De nakata Zoki Kobe, Japón (diseño de Troester) Extrusoras duales de tipo PIN de 150 mm de diámetro, Año de fabricación: 1990, con Roller Feed, y dúplex Die. Relación L/D 16:1 Número de pines: 10 filas x 8 piezas, pines de repuesto incluidos. Velocidad del tornillo 45 r.p.m. Motores 185kw D.C. velocidad variable, 415 voltios, 3ph, 50hz. Libros y dibujos completos disponibles. Unidades de tiristores incluidas. Arranque y panel de control solo para extrusor inferior. Anchura utilizable de la matriz 18o, en buen estado.

1 x David Bridge 15/18o Extrusor de volcado con 40o Cara x 20o dierrodillo. Piezas de repuesto disponibles. Tornillo L/D 5:1, Crammer. Longitud del cañón 7pies. Unidad de torneado en ángulo recto para el flujo del producto. Motor de velocidad variable de 200HP DC

Extrusor de cabezal de rodillo de doble tornillo Kobelco (tipo horizontal), Modelo TSR-330 Conjunto de troquel de rodillo (TSR-33H005H) 38 pulgadas de ancho x 16 pulgadas de diámetro El troquel de rodillo se aleja de la sección del extrusor/mezclador a través del ariete hidráulico. accionado por el motor de velocidad variable de 102 kW DC a través de la caja de cambios de reducción Hansen (en el acoplamiento flexible para que el troquel del rodillo pueda moverse hacia adelante / hacia atrás). Extrusor de descarga de doble tornillo 330mm tornillo dia accionado por el motor de velocidad variable de 90kW DC a través de la caja de cambios de reducción Hanson. En muy buen estado. Anteriormente corría debajo de un F270 Banbury. Completo con todos los controles, manuales y documentación, etc.

Farrel Pomini modelo F620 Mezclador interno Banbury, volumen neto de la cámara de mezcla: 710 litros Número de máquina 6515. Año original de fabricación: 1972, pero el cuerpo reemplazó a 1998 peso aproximado del lote en SG 1 - 533kg, 4 rotores de ala, lados perforados, cámara soldada totalmente estato, rotores y peso flotante, S.S.A. sellos de polvo, puerta de caída hidráulica con actuador lineal, tolva neumática, caja de cambios unidrive con 2 motores ceM 1475kW, 1550A, 1000V, 800/1000rpm DC de velocidad variable, Controles de accionamiento incluidos, pero los controles de operador no están disponibles. En buen estado (solo se utiliza para masterbatch compuesto de neumáticos). Repuestos disponibles: Tapa de la puerta (nuevo), eje de bisagra (nuevo), 2 sellos de polvo, sellos de tolva y sellos de rodamientos.

Extrusor Troter 150mm dia PIN Tipo: QSM150K, Número de serie 8622/80, Año de fabricación: 1980, pero reformado por Troester 2000 (nueva sección de tornillo y barril) Alimentación del rodillo de alimentación, Relación L/D 16:1 8 filas de 8 pines, equipado con motor de velocidad variable ASEA 212kW DC y controles (1800rpm). Completo con controles etc y en muy buen estado.

Línea de troquel de rodillo que consta de:- 1 x extrusor de barril de pasador Troester 200mm Tipo QSM200K-16D alimentación del rodillo de energía, 10 filas de 8 pines, Relación L/D 16:1 Número de serie 1816/88, año 1988, Con unidad de regulación de temperatura, Motor de velocidad variable ASEA DC de 282kW montado en rieles (se aleja de calender a limpiar, etc.) Cabezal de chapado hidráulico conectado directamente a:- 1 x Adamson 24in dia x 68in ancho dos rollo calender, rollos percedy perforados eje transversal, cojinetes tipo arbusto, ajuste motorizado de nip con caja de cambios unidrive Motor de velocidad variable De 277kW ASEA DC Dispositivo de sujeción hidráulica para extrusora Juego de 4 x tambores de refrigeración Doble enrollador y aplicador de revestimiento Unidad de Tiza Control PLC de Siemens. Línea completa en excelente es ...

1 x Francis Shaw Modelo K6 Intermix, Año original de fabricación: 1977, Cuerpo reconstruido instalado por el número de serie de Carter 242.93, Año: 1993, Descarga hidráulica de la puerta de caída, Volumen de la cámara de mezcla: Aprox. 112 litros Tolva neumática, 750HP, motor de anillo deslizante, 3ph, 50 Hz a través de Sturdigear 1460/15.7 rpm reducción de caja de cambios (1000HP de potencia). Completo con unidad hidráulica + controles del operador etc y en muy buen estado.

machine measurements: -- mmmachine weight: -- kgpower capacity: -- kWCondition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60- batch volume approx.: 1-100 litres,- working temperature: - 150°C- drum speed: 5 - 30 rpm- Blast wheel speed: 1,000 - 9,500 rpm- Control: Siemens S7 SimaticThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 500 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 110 kWCondition: used, overhauled Specification: Rolling mill 500 x 1500 mm - second-hand- roller diameter: 500 mm- roll length: 1500 mm- monoblock motor under the rollers- Fixed friction between the rollers- Rollers: with core bore, with central chamber for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- Tilting material guide jaws made of steel with mechanical with mechanical safety interlock- Rollers: mounted on bronze bushes with circulating oil lubrication via pump- New Johnson-Fluiten ball swivel joints for connection to water circuit to water circuit- New safety brake for EMERGENCY STOP- New AC moto ...

roll diameter: 250 mmroll length: 500 mmrolls drilled: Kernbohrung nip adjustment: mechanisch drive power:: kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 700 mmroll length: 2200 mmrolls drilled: Kernbohrung Nip adjustment: hyraulisch 0total power requirement: 160 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 3000 kNheating plates:: 600 x 630 mmelectrically heated:: °Cheating power:: kWpiston stroke:: 420 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: Press 600 x 630 mm, second-hand- clamping force: 300 tonnes (3,000 kN)- closing: from bottom to top- Heating platens: 2 electric platens, with new heating rods- Heating platen dimensions approx.: 600 x 630 mm- Distance between the heating platens approx.: 420 mm- New electric valves- AC machine output oil pump: 5.5 kW- New control cabinet with Siemens 7’ touch panel- PLC control system make Siemens S7-1200- New cabling- Frequency inverter made by Schneider- Light barriers in the front area,Overhauled in accordance with CE standard safety regulationsOperating instructions and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the sof ...

0: 200 °CTorque: - 0Dimensions (HxWxD): 680 x 1320 x 760 mmweight: 177 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 1500 x 2400 x 1150 mmmachine weight: -- kgpower capacity: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 70 mmscrew length:: 22D screw speedl:: -- U/minCondition: usedSpecification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling BathConsisting of:Extruder COLMEC 70 x 22D- Screw diameter: 70 mm- Screw length approx.: 22D- Extruder motor power: 37 kW- Cooling unit for extruderHot air oven:- Hot air oven power: 80 kW- Fan power: 2x 0.36 kW, 2x 1.5 kW- Stainless steel cooling bathThe system is in good condition and wasstill in operation until approx. 6 months ago- Sold as seen. The buyer is responsible for safety regulations. Without CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 550 mmroll length: 1500 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 110 kWCondition: used, overhauled Specification: rolling mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- monoblock - motor under the rolls- Fixed friction between the rolls- Rolls: peripherally drilled, for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- tiltable steel material guide jaws- Rollers: mounted on bronze bushes with oil circulation lubrication via pump- new ball bearing slewing rings for connection to water circuit- Safety brake for EMERGENCY STOP- New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture- Safety bars bi-directional- New electrical control cabinet with PLC system S7-120 ...

screw ø:: 60 mmscrew length:: 11D screw speedl:: -- U/mindrive power:: 18,5 kWCondition: used, reconditionedSpecification: rubber extruder – used- Screw diameter: 60 mm- Screw length approx.: 11D- New screw- Cylinder refurbishment- Feed roller refurbishment- New safety cage- New rotary joint for water- New AC motor: 18.5 kW- New control cabinet with Siemens S7-1200 PLC system- New control panel with Siemens KTP700 Basic touch panel- New Siemens G120 frequency converter for variable speed- Remote maintenance device- New cabling- Pressure sensors on the extruder head- Safety device- CE marking and an operating and maintenance manual in EnglishRefurbished in accordance with CE standard safety regulationsWarranty: 1 yearOption: TCU for temperature control of the water up to 95°C, for placement near the extruderThe data for thi ...

clamping force: 2.700 kNinjection volume: 6.000 cm³screw diameter: -- mmplaten size: 560 x 630 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000Clamping unit:- Clamping unit: vertical- Clamping force: 2.700 kN- Platen size: 560 x 630 mm- Max. stroke: 550 mm (see data sheet) Injection unit:- Max. injection volume: 6,000 cm³- Injection pressure: 2150 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Motor power: 28,2 kW- Installed heating capacity: 49,9 kW- Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic un ...

clamping force: 4.500 kNinjection volume: 3.300 cm³screw diameter: -- mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 600 mm (see data sheet) Injection unit:- Max. injection volume: 3,300 cm³- Injection pressure: 2150 bar- Power supply: 3x 400 V, 50 Hz, N- Motor power: 35,5 kW- Installed heating capacity: 73,9 kW- Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg  ...

clamping force: 4.500 kNinjection volume: 5.600 cm³screw diameter: 610 - 985 mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 610 - 985 mm (see data sheet) Injection unit:- Injection unit type: ADV- Max. injection volume: 5,600 cm³- Injection pressure: 2200 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Pump capacity: 27 kW- Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.:  ...

clamping force: 4.500 kNinjection volume: 5.000 cm³screw diameter: -- mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 600 mm (see data sheet) Injection unit:- Max. injection volume: 5,000 cm³- Injection pressure: 2060 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Motor power: 38 kW- Installed heating capacity: 67.5 kW- Weight:Clamping unit approx.: 8,900 kgInjection unit approx.: 3,200 kgHydraulic unit with oiland control cabinet 2,350 kg- For dimensions, see the installation data in the appe ...

clamping force: 300 kNinjection volume: 180 cm³screw diameter: -- mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine for rubber - second-handClamping unit:- Clamping unit: vertical- Clamping force: 300 kN- Platen size: 300 x 300 mm Injection unit:- Maximum injection volume: 180 cm³- Mains supply: 3x 400 V, 50 Hz- Power rating: 11 kW- Control system: MAPLANThe machine is still in production and can be viewedin operation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll surface width: 450 mmroll diam. toproll: 203 mmroll diam. bottom roll: 203 mmoutput: 8,8 kwSmall roll gap 0.1 mmMaximum roll gap 47 mmFront/rear roll speed 5-30 rpmFront/rear roll speed 3.2-19.1 m/minRolls individually drivenFriction variable max. 1:6Manual gap adjustmentManual speed controlExternal temperature controlRollers internally cooled (water cooling)Emergency stop handle (manual operation) on both sidesThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours ...

speed of feed:: 60 m/minfeed:: 5 - 99.999,9 mmcuts max.:: -- Schnitte/mcross-section width:: 5 - 90 mmcross-section heigth:: 5 - 90 mmCondition: Second-hand,Specification: Strip and tube cutting unit • Cutting unit: Impact blade cutting with cutting sleeves• Material diameter approx.: 5–90 mm• Conveyed by two drive belts• Distance between the belts max.: 90 mm • Belt adjustment via motor, controlled via control panel• Lower belt fixed, upper belt motor-adjustable• Belt contact length approx.: 500 mm• Contact width: 80 mm• With a maximum speed of approx.: 60 m/min• Electronic length measurement: 5 – 99,999.9 mm • Maximum cutting accuracy: +/- 2 mm• Cutting is performed by a servo motor: 1 kW• Power supply: 380/400V, 50Hz, 5kW• Material feed directio ...

volt: 380 Vweight: 1,4 t: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 350 kNinjection volume: 170 cm³screw diameter: 36 mmplaten size: 380 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 350 kN- Platen size: 380 x 300 mm- Heating power of the plates: 6 kW- Clamping/opening stroke: 200 mm- Clearance between the plates: 250 mm- Clamping direction: from belowInjection unit:- Pressure: 1,050 kg/cm²- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Max. screw speed: 30–110 rpm- Metering stroke: 165 mm- Injection: from above- Voltage: 3 × 400 V, 50 Hz, N, PE- Pump drive power: 11 kW- Hydraulic motor power: 10 kW- Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm- Weight ap ...