edge banding machine HOLZKRAFT minimax me 40 tr s

Pre-milling unit: yes;
Pre-milling unit material removal: 0 - 2 mm;
plastic edges: 0,4 - 3 mm;
solid wood edges: 0,5 - 5 mm;
Workpiece thickness: 8 - 50 mm;
Minimum length of workpiece: 120 mm;
Min. work piece width: 110 mm;
Anti-adhesive spraying unit: yes;
Edge preheating device: yes / with ceramic infrared lamp;
Bonding unit: granulat / Glue container quick-change kit;
Jack knife: yes;
Flush trimming unit: yes;
Corner copy unit: yes;
Flush radius milling unit: yes;
Radius scraper unit: yes;
Area scraper unit: yes;
Buffing unit: yes;
Cleaning spray unit: yes;
motor power: 5 kW;
machine length: 3774mm;
machine width: 1546 mm;
machine height: 1337mm;
weight: 842 kg;

Top equipment for high productivity with low space requirements!
Intuitive operation with the eye-S control and 10 large touchscreen:
- HMI Maestro Active Edge
- Graphic display of all processing units and their operating status
- Graphic simulation of the machining operations
- Control of all processing units
- Regulation of the glue pool temperature
- Assistance functions for setting up the machine according to the machining program
- Fault diagnosis for quick correction of simple errors
- Statistics on machining parameters
- USB port
- Preparation for network connection
- Excellent accessibility to the working units thanks to the large hood that ensures protection and noise reduction
- Automatic aggregate positioning when changing plate thickness
- Plate feed by conveyor with rubber sliders
- Quality Made in Italy

Equipment details

10 touchscreen control panel
- Optimal machine management due to the new 10 touchscreen control panel with Maestro active edge on which all machine functions are displayed graphically

Premilling unit
- Two slide cutter

Gluing station
- The glue is heated quickly and evenly by heating rods located both in the glue pot and in the glue application roller
- Automatic temperature reduction when the machine is in idle for longer
- Teflon-coated glue container for easy glue replacement
- Device for recycling of unused glue
- Automatic application of roll edges with cutting knife for edges up to 3 mm
- Turntable with Ø 730 mm
- Self-lubrication of the glue pot
- Kit for quick change of the glue container

Flush radius trimming unit
- With sensing rollers in horizontal and vertical direction for optimal tool positioning
- Equipped with combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm
- Precise setting via 2 digital displays
- With chip exhaust

Surface scraper
- Absolute cleanness for the perfect finish of workpiece surface
- With rotating copy device

Buffing unit
- Drive via G51245000 two independent G51245000 swivel and height-adjustable motors
- For perfect cleaning and polishing of the panel edges

Radius scraper
- With numerical position display
- For the perfect finishing of plastic edges
- With device for retracting the unit when it is not needed

Edge magazine
- For automatic application of strip edges
- Solid wood strip edges are automatically loaded and synchronized with the panel guide

Available as an option: Grooving unit
- Allows gluing and grooving of the workpiece in one pass
- Installation only possible as an alternative to buffing unit 5514560

Milling unit (me 40 tr s)
- For capping the edge, as well as for radius milling on the top and bottom side
- The radius cutter is used to trim the edges when solid wood edges are glued
- High frequency motor with 12.000 rpm; saw blade Ø 125 mm Z12

Sprayer for finishing the edge
- For pre-cleaning of the panel surface and edge for more effective cleaning

Cross-cut unit (me 40 tr s)
- For capping protruding edges

Rounding unit (me 40 tr s)
- For rounding the edges
- High frequency motor with 12,000 rpm; cutter Ø 58 mm Z4
seller offer No. resale 1527